Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
RXSOL has the wide range of chemicals for cleaning chemicals for any type of vessel Including those carrying coal petcock & related to get the cargo hold clean for the next cargo choice of suitable cleaning chemical is essential & very important when applied the chemical resident type apply as important role as a surface active agent need time to penetrate & to take outside particular from the hold surface
Iron Ore Red Dust Cleaner Usage Directions
Directions for Use
In general Dilute 1 part Iron Ore Red Dust Cleaner with 4 parts water and spray onto the surface being cleaned, And allow Iron Ore Red Dust for 20 to 40 Minutes to penetrate.
And For Hard Deposits Vigorously agitate the on the surface being cleaned with a stiff bristled brush or broom. And allow Iron Ore Red Dust for 20 to 40 Minutes to penetrate. Again, vigorously agitate the surface. The iron ore will begin to break up and be released from the substrate.
Stubborn areas may need to be again saturated and left for a further 10 minutes before vigorously agitating.
Rinse the surface with a high pressure washer or hose until all dissolved concrete and Iron Ore Red Dust Cleaner has been removed from the surface being cleaned.
Safety and Environment Safety Iron Ore Red Dust Cleaner is classified as a skin irritant in its concentrate form and is classified as nonhazardous for transport according to the Australian Dangerous Goods Code. This “non-DG” classification also means less regulated storage of Iron Ore Red Dust Cleaner containers on construction sites and industrial warehouses. Whilst Iron Ore Red Dust Cleaner displays a very low hazard profile for the user in terms of its effect on skin, eyes and respiratory system it is recommended to always wear protective gear including but not limited to chemical proof coveralls, goggles, gloves and rubber boots to minimize exposure to concrete residues and prolonged contact with Iron Ore Red Dust Cleaner
Biodegradation and Aquatic Safety Iron Ore Red Dust Cleaner is readily biodegradable, phosphate free and does not contribute to the eutrophication of waterways.
Waste Water Systems Red Dirt Buster has very low COD and BOD levels making it an excellent choice for use where wastewater processing systems are used. It is, however, recommended that pH readings be taken to ensure that wastewater pH readings comply with board recommendations
Keep tightly closed coantainer. Avoid direct concentrated product contact with any part of BODY skin. The most important things HOLD BRITE RXSOL doesn't release any gases or smell, this uniquness of product kept in safe category.
Analysis Report
Test | Specification | Result |
Appearance | Clear Liquid | Clear Liquid |
Assay (H3PO2) | 50.00 TO 52.00 % | 50.38 % |
Chloride (Cl),ppm | 150 ppm MAXIMUM | 20 ppm |
Color, (APHA) | Less than 30 APHA | Less than 30 APHA |
Iron (Fe), ppm | 10 ppm MAXIMUM | 2 ppm |
Orthophosphite % | 0.500 % MAXIMUM | 0.400% |
Specific Gravity | 1.201 to 1.265 G/CC | 1.210 |
Keep tightly closed coantainer. Avoid direct concentrated product contact with any part of BODY skin. The most important things HOLD BRITE RXSOL doesn't release any gases or smell, this uniquness of product kept in safe category.