Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
Your shopping cart is empty.
Product Code: RXSOL-22-5588-888
Product Code: RXSOL-12-1880-235
TECHNICAL SPECIFICATIONS :
| Appearance/nature | : Viscous flowable liquid |
| Colour | : Colourless to pale yellow |
| on APHA (20% aqueous solution), maximum | : Characteristic |
| Odour | : 500-234-8 |
| pH (1 % aqueous solution) | : 6.8-8.5 |
| Active Matter, % by mass minimum | : 68 |
| Molecular Weight | : 384 |
| Sulfate, % by mass as Na2SO4, maximum | : 1.5 |
| N.D.O.M.,% by mass(on 100% A.M.basis), max | : 3.0 |
| 1, 4 - Dioxane (on 100% A.M. basis), ppm, max | : 30 |
| Iron content as Fe, ppm, maximum | : 5 |
| Heavy metals as Pb, ppm, maximum | : 15 |
| Microbial count, TVC, cfu/ml | : < 10 |
Certificate of Analysis according to DIN 55350-18-4.2.2
| Sr.No | Characteristic / Method | Unit | Value | Lower Limit | Upper Limit |
| 1. | Appearance @25 °C 93000601 | Confirms | Transparent to yellowish Flowable Paste | ||
| 2. | Odour 93000701 | Confirms | Conform to STD | ||
| 3. | Active Ingredient (M.W.384) ISO 2271 | % | 69.2 | 69.00 | 70.00 |
| 4. | pH 3% Solution ISO 4316 | 7.2 | 7.00 | 9.00 | |
| 5. | Sodium Sulfate Method No. 920015-01 | % | 0.3 | 1.00 | |
| 6. | Unsulfated Matter Method No. 970064-02 | % | 2.4 | 2.80 | |
| 7. | Dioxane (as is) Method No 920021-01 | ppm | 21 | 30 | |
| 8. | Colour APHA (20% Sol. @25 °C) ISO 6271 | 16 | 25 | ||
| Packing / Production Date | |||||
| Expiry Date / Shelf Life | |||||
SLES is an anionic surfactant and classified under alkyl ether sulfates. It is obtained by combining a fatty alcohol such as coconut oil with ethylene oxide and subsequent sulfonation.
SLES is available in three forms:
Liquid SLES : Viscous Liquid
PASTE SLES : JELLY form
Powder SLES : Snow White
Product Code: RXSOL-12-1746-010
| CHARACTERISTICS | : | SPECIFICATION |
| Description | : | A White Translucent Unctuous Mass, Slightly Fluorescent in daylight when melted, odourless, when wubbed on the skin |
| Solubility | : | Slightly soluble in Methylene Chloride, insoluble in Water, Ethanol (96%) & Glycerol |
| Drop Point Deg.C | : | 40 – 60 |
| Consistency Dmm | : | 100-300 |
| Infrared Absorption of A 0.05 % W/V solution In 2,2,4 – trimethylpentane, at about 290 Nm | : | As per specification |
| Acidity or Alkalinity | : | As per specification |
| Polycyclic Aromatic Hydrocarbons | : | As per specification |
| Sulphated Ash,% | : |
0.05 Maximum |
HANDLING & STORAGE
Handling: Avoid contact with skin and eyes. Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Keep away from all ignition sources.
Storage: Store in cool, well- ventilated place away from sources of heat and direct sunlight. Keep container tightly closed. Keep only in the original container.
HEALTH & SAFETY:
Product is unlikely to present any significant health or safety hazards when properly used in the recommended application and good standards of industrial and personal hygiene are maintained.
Product Code: RXSOL-60-6605-275
Product Code: RXSOL-60-6604-439
Product Code: RXSOL-15-3055-050
| Appearance @ 25 Deg C | Waxy Flake |
| Infrared Spectrum | Matches Standard |
| pH (1% Solution) | 9.0 – 11.0 |
| Melting Point | 61.0 – 64.0 °C |
| Gardner Color @ 70 Deg C | 3 Max |
| Acid Value | 2.0 Max |
| Ester, % | 15.0 Max |
| Monoethanolamine, % | 1.5 Max |
| pH (10% Aqueous) | 9.0 – 11.0 |
| Free Fatty Acid, (MW 200), % | 2.0 Max |
|
Glycerine, % |
7.0 – 12.5 |
|
Specific Gravity, @ 60°C |
0.97 |
| Total Plate Count (CFU/g) |
<10 |
Product Code: RXSOL-12-8457-210
The product is clear with a clean odour.
Important health, safety and environmental information RTU
| pH (5% solution) | 10.5-11.5 |
| Boiling point/boiling range | NA |
| Freezing point | NA |
| Flash point | Not Volatile |
| Flammability (solid, gas) | Completely Non Flammable |
| Explosive properties | Not explosive |
| Oxidising properties | Not an oxidiser |
| Vapour pressure | Not Vepourized at room temperature |
| Relative density | Greater than water |
| Solubility | 100% in water |
| Specific gravity | 1.01 |
| RVOC% |
0.00 |
| Colour | Brownish |
| Total Fatty Matter | 35.0 – 38.0 |
Also called Brown Soap Solution.
Product Code: RXSOL-22-2226-025
Product Properties:
|
Appearance |
Pale / Brownish liquid |
|
Density |
In g/cm3 at 20°C: Spec. gravity : 1.035 |
|
Compatibility |
|
|
Metal |
No known effect |
|
Rubber |
No known effect |
|
pH |
Alkaline ( 12.7 - 13 ) |
|
Flash point |
Not Applicable |
|
Solubility |
100% soluble in water |
|
Packaging |
Size (in Litres) : 25, 50, 210 Ltr |
We are keeping ready stock of Cargo Clean HeavyDuty HD and Other Ship Hold Cleaning Detergent at Indian UAE and Oman. Cleaning of Hold can be easy, if selection of your detergent is selective against CARGO nature. For Example Cement Cargo can't be clean by Alkaline Based materails, simillarly Coal Cargo can't be cleaned by Acidic Materials. In this link we tried to keep suitable cargo cleaner.. http://rxmarine.com/ALKAATUFF-Heavyduty-Alkaline-ship-hold-cleaning-detergent-and-chemicals
Product Code: RXSOL-12-3000-005
Product Code: RXSOL-12-2031-220
Other names:Sodium hyposulfite, Hyposulphite of soda
Identifiers CAS number : 7772-98-7 Y, 10102-17-7 : (pentahydrate)
UNII :L0IYT1O31N Y
ChEMBL CHEMBL : 1201157 N
RTECS number :XN6476000
|
Molecular Formula |
Na2S2O3.5H2O |
|
Molar Mass |
158.11 g/mol |
|
Appearance |
white crystals |
|
Odor |
odorless |
|
Density |
1.667 g/cm3 |
|
Melting Point |
48.3 °C (pentahydrate) |
|
Boiling Point |
100 °C (pentahydrate, - 5H2O decomp) |
|
Solubility in Water |
76.4 g/100 g H20(20 °C) |
IUPAC name :Sodium thiosulfate
Other names:Sodium hyposulfite ,Hyposulphite of soda
Identifiers
CAS number : 7772-98-7 Y,
10102-17-7 : (pentahydrate)
PubChem: 24477
ChemSpider :22885 Y
UNII :L0IYT1O31N Y
ChEMBL CHEMBL : 1201157 N
RTECS number :XN6476000
Keep away from heat as the potential for release of sulfur dioxide fumes exists. Liquid sodium thiosulfate has very low toxicity but routine safety precautions should be practiced. Rubber gloves, safety goggles and protective clothing is recommended.
Sodium Thiosulfate, wt%30 +/- 2%
Sulfite, wt%1.5 max.
pH 7.0 – 9.0
Physical Properties:
Specific Gravity @ 25o C 1.252 – 1.34
Density, lbs/gal @ 25o C 10.4 – 11.2
We are marine chemical supplier since 1996.These Marine Chemicals include different sets of products such as Tank Cleaners, Maintenance Chemicals, Cooling Water Treatment Chemicals, Boiler Water Treatment Chemicals, Fuel Additives, etc.
Oman Chemical is leading one Largest Supplier, Manufacture a
Oman Chemical is leading one Largest Supplier, Manufacture a
