Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
Your shopping cart is empty.
Product Code: RXSOL-19-3356-092
Soak stained laundry in a mixture of hot or warm water and sodium percarbonate (laundry booster) - 1 to 3 tbsp per litre for up to 24 hours. For a large load, add 4 tbsps. For a front loading washer, dissolve the powder in a little hot water and then add to the detergent water.
Product Code: RXSOL-12-1880-220
TECHNICAL SPECIFICATIONS :
| Appearance/nature | : Viscous flowable liquid |
| Colour | : Colourless to pale yellow |
| on APHA (20% aqueous solution), maximum | : Characteristic |
| Odour | : 500-234-8 |
| pH (1 % aqueous solution) | : 6.8-8.5 |
| Active Matter, % by mass minimum | : 68 |
| Molecular Weight | : 384 |
| Sulfate, % by mass as Na2SO4, maximum | : 1.5 |
| N.D.O.M.,% by mass(on 100% A.M.basis), max | : 3.0 |
| 1, 4 - Dioxane (on 100% A.M. basis), ppm, max | : 30 |
| Iron content as Fe, ppm, maximum | : 5 |
| Heavy metals as Pb, ppm, maximum | : 15 |
| Microbial count, TVC, cfu/ml | : < 10 |
Certificate of Analysis according to DIN 55350-18-4.2.2
| Sr.No | Characteristic / Method | Unit | Value | Lower Limit | Upper Limit |
| 1. | Appearance @25 °C 93000601 | Confirms | Transparent to yellowish Flowable Paste | ||
| 2. | Odour 93000701 | Confirms | Conform to STD | ||
| 3. | Active Ingredient (M.W.384) ISO 2271 | % | 69.2 | 69.00 | 70.00 |
| 4. | pH 3% Solution ISO 4316 | 7.2 | 7.00 | 9.00 | |
| 5. | Sodium Sulfate Method No. 920015-01 | % | 0.3 | 1.00 | |
| 6. | Unsulfated Matter Method No. 970064-02 | % | 2.4 | 2.80 | |
| 7. | Dioxane (as is) Method No 920021-01 | ppm | 21 | 30 | |
| 8. | Colour APHA (20% Sol. @25 °C) ISO 6271 | 16 | 25 | ||
| Packing / Production Date | |||||
| Expiry Date / Shelf Life | |||||
SLES is an anionic surfactant and classified under alkyl ether sulfates. It is obtained by combining a fatty alcohol such as coconut oil with ethylene oxide and subsequent sulfonation.
SLES is available in three forms:
Liquid SLES : Viscous Liquid
PASTE SLES : JELLY form
Powder SLES : Snow White
Product Code: RXSOL-12-8896-210
Form / Phase : Homogenious liquid
Specific Gravity: 1.052 at 20 °C (68°F) , g / cm3
Flash Point: NA
Freeze Point: 32°F
pH: 13–14 For Heavy Duty Grade and In general 9 - 10
Odor: slight/butyl
Storage: Store in the original packaging or in specially appropriate containers, protected from heat sources.
Product Code: RXSOL-12-8896-025
Form / Phase : Homogenious liquid
Specific Gravity: 1.052 at 20 °C (68°F) , g / cm3
Flash Point: NA
Freeze Point: 32°F
pH: 13–14 For Heavy Duty Grade and In general 9 - 10
Odor: slight/butyl
Storage: Store in the original packaging or in specially appropriate containers, protected from heat sources.
Product Code: RXSOL-12-1008-025
Not recommended for:
Product Code: RXSOL-12-1518-025
| Application Type | Sodium Gluconate % in Detergent |
|---|---|
| Light duty alkaline CIP | 2 – 5 % |
| Heavy duty alkaline CIP | 5 – 10 % |
| Hard water systems | Up to 12 % |
Typical CIP solution concentration:
0.5 – 2% detergent in water
Temperature: 60–80°C
Contact time: 20–40 minutes
Heavy-Duty Food Plant Cleaner
Caustic Soda (NaOH) – 25–35%
Sodium Gluconate – 5–8%
Sodium Metasilicate – 5–10%
Low-foam Surfactant – 2–4%
Water – Balance
Sodium Gluconate is white or slight yellowish crystal free flowing powder. Sodium gluconate is a compound with formula NaC6H11O7 having water soluble nature.
| Form | Powder, Finecrystalline |
| Colour | White |
| Odour | Odourless |
| Odor Threshold | Threshold Not applicable |
| pH | 7.0 - 8.0 at 100 g/l 20 °C |
| Melting Point | 170 - 175 °C |
| Boiling Point | Not Applicable |
| Flash Point | Not Applicable |
| Evaporation Rate | No information available. |
| Flammability (solid, gas) | No Data Available |
| Explosive limits | No Data Available |
| Vapour pressure | No Data Available |
| Vapour Density | No Data Available |
| Specific Gravity | 1.98 g/cm3 at 20 °C |
| Partition coefficient | No data available |
| Explosive properties | None |
| Water Solubility | 590 g/l at 25 °C |
| Auto Ignition temperature |
No information available. |
Sodium GLucoante is more usefull When
✔ High iron water
✔ Hard water conditions
✔ Dairy scale problems
✔ Heat exchanger cleaning
✔ Alkaline CIP systems
Stable in strong alkaline solutions
Compatible with chlorine at controlled levels
Works best at pH > 10
Not a strong acid scale remover (acid CIP required for heavy carbonate deposits)
Sodium Gluconate is the sodium salt of gluconic acid and is produced by fermentation of glucose. It is a white granular, crystalline solid which is very soluble in water. It is non corrosive, non toxic, biodegradable and renewable. It is resistant to oxidation and reduction even at high temperatures. The main property of sodium gluconate is its excellent chelating power, especially in alkaline and concentrated alkaline solutions. It forms stable chelates with calcium, iron, copper, aluminium and other heavy metals. It is a superior chelating agent than EDTA, NTA and phosphonates.
Product Code: RXSOL-60-6550-002
Product Code: RXSOL-19-3356-048
Product Code: RXSOL-19-3254-025
Product Code: RXSOL-19-3542-025
We are marine chemical supplier since 1996.These Marine Chemicals include different sets of products such as Tank Cleaners, Maintenance Chemicals, Cooling Water Treatment Chemicals, Boiler Water Treatment Chemicals, Fuel Additives, etc.
Oman Chemical is leading one Largest Supplier, Manufacture a
Oman Chemical is leading one Largest Supplier, Manufacture a
