Deck cabin galley Maintenance-25 | Page 2 | Marine Chemicals,Tank Cleaning Chemicals,Water Chemicals Products,Cooling Water Treatment Chemicals

Product Short Description: Specially formulated for cleaning of oily greasy surface of tanks.

Product Technical Specification:

RXSOL-20-2002-050 SEA CLEANER is an extremely effective liquid blend of concentrated emulsifier with penetrating agents,mild abrasives and wetting agents which makes this an excellent liquid scouring cleansers for cleaning and degreasing of double bottom,deep tanks etc which is used for fuel oils It can also be used for BOILERS, MARINE DIESEL ENGINE COOLING WATER SYSTEM and for local cleaning and degreasing of engine rooms on deck.

Remarks:

Use Handgloves, Goggles and safety mask before using in Tank. Keep container tightly closed and away from direct heat, fire and sunlight.

Images:

Marine Descaler

Product Short Description: LIME Marine is a safe, biodegradable marine descaler developed to dissolve problematic fouling mediums including calcium, rust, mussels, barnacles, tiger shells and other scale formed mineral deposits that hinder the performance of vital water systems

Product Technical Specification:

PHYSICAL STATE	: LIQUID, DARK LIQUID
BOILING POINT	: 105° C
SOLUBILITY IN WATER	: MISCIBLE
SPECIFIC GRAVITY, (WATER=1)	:1.03 @ 25 DEGREE C
VAPOR PRESSURE	: 20.1mmHg @ 25 DEGREE C
VAPOR DENSITY, (AIR=1):	: .62 @ 25 DEGREE C
pH	: UNREADABLE, GENERALLY < 3
EVAPORATION RATE, (WATER=1):	:SLOW

Remarks:

LIME Marine does not corrode, erode, attack, oxidize or have other deleterious affects on virtually any metal or materials found in marine water systems such as: BRASS, IRON, LEATHER, CERAMIC ,WOOD, FIBER, PLASTICS FIBERGLASS, COPPER, STEEL, TITANIUM ,COPPER NICKEL ,RUBBER, GLASS, GELCOATS PAINTED SURFACES.

LIME Marine is an electrolyte, as are most cleaning agents. An electrolyte is any liquid that will transfer small electrical currents. Examples: salt water, vinegar, Coca-Cola. An electrolyte may cause plating in some types of equipment. This means a transfer of small amounts of one metal onto another metal according to the galvanic corrosion chart. In some instances, a thin coating of copper may be plated onto a steel drum while circulating an electrolyte such as RXLYME Marine. The only time plating occurs is when two dissimilar metals are in an electrolyte solution.

It is recommended, but not mandatory, that the LIME Marine solution be thoroughly mixed before using. Some settling of a dark precipitate may occur, resulting in an amber colored liquid, but has no negative affects upon the performance of the solution.

Images:

Water Heater Geyser Cleaner

Product Short Description: Leave for just 10 minutes chemically developed RXSOL particle will dissolves hard and old lime scale deposits from surface of appliances.

Product Technical Specification:

A high strength commercial descaling fluid to attack stubborn lime scale caking inside dishwashing machines and other stainless steel equipment within the commercial catering environment. Descaler must be diluted before use using a 30ml 5lt pelican pump.

Dishwashers/Glass washers
• Switch off the electronic wall mounted dosing equipment (if applicable).
• Dilute Descaler with up to 20 parts water depending on the degree of scale build up and add directly into the wash tank. For best results, heat water up to working temperature and circulate until all scale is removed.
• Drain solution, refill and rinse thoroughly with clean water. Drain again and refill with clean water.

Tea Urns
• Fill urn with water and add 10 plunges of Descaler via 30 ml dispensing pump fitted to 5lt container.
• Allow approximately 1 hour contact time. If necessary, agitate scale with green scouring pad to remove stubborn heavy scale deposits.
• Drain and rinse thoroughly with clean water.

Floors & Hard Surfaces
• If you live in a hard water area and your water supply is untreated, routine floor & hard surface cleaning may leave scale deposits that will periodically need to be removed.
• Dilute Descaler with up to 20 parts water and wash the floor or surface as you would under normal circumstances. Always rinse the floor or surface after descaling and clean again using the appropriate cleaning product.

N.B. The use of hot water will accelerate the effectiveness of Descaler.

Remarks:

How to clean Coffee Machine / Kettle water heater
Half fill boiler of Coffee Machine with water and boil. Unplug electrical connection and slowly add the one spoon powder contents of RXSOL-25-1052-005. Leave for just 10 minutes chemically developed RXSOL particle will dissolves hard and old lime scale deposits from surface of appliances. It extends the life of the appliance and saves running cost.

Images:

Aqua Clean Tuff High Foam

Product Short Description: Very effective alkaline ship hold cleaner also can be use as multi purpose ship hold cleaning and general digressing agent. Stock available at - Kandla, Mumbai, Ennore - Chennai, Visakhapatnam - Gangavaram, Kolkata, Haldia, Fujairah

Product Technical Specification:

Tips for Hold cleaning - Prior to high pressure hold washing, excess cargo residue on the tank top should be removed by hand sweeping and lifted out of the holds via the use of a portable mucking winch. After all excessive cargo residue has been removed then the holds can be washed with salt water using a highpressure hold cleaning gun, supplemented by the deck air line to provide increased pressure. This is the most commonly used method of hold cleaning. Then use Aqua Clean Tuff hold cleaning Marine Chemicals. Cleaning Chemicals; Cargo Hold Cleaning detergent to get optimum result.

Remarks:

Hold Cleaning Preparation and Method :

Preparing Cargo Holds for loading Grain depends on the previous cargo.

1. Cargo Holds must be thoroughly cleaned and dry and trace of previous cargo in frames,

beams, girders, and other structure.

2. There should not be any loose rust and or paint scale anywhere in the Cargo Holds,

Bulkheads, upper and lower hopper spaces, underneath of Hatch Covers and tank top.

3. There should not be traces of live & dead insect & weevils.

4. Bilge covers should be cleaned of any cargo residues and have enough drain holes. Bilge

cover needs to be grain tight but not watertight.

5. Bilge well should be cleaned of previous cargo dray and odour free.

6. Bilge suction should be operational at all the times.

Removal of cargo residue:

Air Blow from top using high pressure air to reach all accessible corners. Cargo to be swept,

scrapped & collected in a drum. Attention to be given

• Australian ladder and its platforms and stanchions

• Beams and girders under cross decks

• Frames, beams, girders, and other structure

• Large pipes holding brackets behind the pipes

Then Cleaning and sweeping coal cargo from the hold as maximum possible by HELPER / Crew member

Loose Rust & Paint Scale:

A sharp hand scraper shall be used to take off the peeling rust & paint scale

Special attention to following areas:

• Australian ladder and its platforms, hand rails and stanchions

• Australian ladder and its platforms and stanchions

• Beams and girders under cross decks

• Frames, beams, girders, and other structure

• Large pipes holding brackets behind the pipes

• Hatch coamings and under hatch covers

• Booby hatches & cover

Tank top loose rust

Tank top should be free of loose rust and cargo residue

Any rust which can be scraped by hand scrapers should be removed.

The tank top should be rinsed with fresh water

Cleanliness of cargo hold bilges :

Hold bilges must be cleaned thoroughly to remove all residue, rust particles and cargo stains etc.

The filter (Rose Box) must be cleaned thoroughly

The bilge well sections shall be washed with continuous running of sea water to remove all odour and later rinsed with fresh water

Images:

Water Spirit Main Alternator Cleaner

Product Short Description: LOW Evaporation Degreasing electrical equipment.It provides immediate and efficient removal with a high evaporation rate.

Product Technical Specification:

Product Properties
Appearance	Clear Colourless Liquid	Vapor Density : Heavier than air
Flash Point	63°C (Closed Cup)	Stability : Very stable understandard,.normalconditions
Compatibility
Metal Plastic Rubber	No known effect No Known effect May swell	Note: After use the product must always be well sealed in the drum.
Packaging	Order No	Size (in kgs./lts.)
	RXSOL-16-1077-025	7/25 Lts

Remarks:

Images:

Urea Solution Standard

Product Short Description: Liquid Urea is a crystal clear aqueous solution of urea.

Product Technical Specification:

Chemical & Physical Properties

Chemical Formula	CO(NH2)2
CAS Number	57-13-6
Molecular Weight	60.056
Specific Gravity	1.140
pH	6.5 - 8.5
Salt-Out Temp	62°F (18°C)
Colour	Clear Liquid
Odor	slight ammonia smell

Typical Analysis :

Urea 23% Nitrogen	50%
Turbidity	5 ppm
pH	8.5 Max
Ammonia	0.03%
Biuret	< 0.25%
Ash	35 ppm
Iron	2 ppm
Chloride	10 ppm
Color - Max	0 (APHA)
Alkalinity - wt (NH3) Max	0.05%

Remarks:

Images:

Ice Machine Cleaner and Sanitizer

Product Short Description: Nickel Safe Ice Machine Cleaner is Suitable to clean deposits of black mildew by killing bacteria & spores as well as mineral scale deposits.

Product Technical Specification:

Appreance	:	Clear Liquid
Odour	:	Neutral
pH	:	<1.0
Soecific Gravity	:	More than 1
Viscocity	:	25 cps
Boiling Point	:	108 °C
Flash Point	:	Not Applicable
Solubility in Water	:	100 % in any ratio

Remarks:

How to Cleane Ice Maker Machine?

1st for Ice Maker Component Cleaning: Dip BATH process.
Takes 100 ml of RXSOL Ice Machine Cleaner for 3 Ltr of warm water in plastic container and immerse components in solution. Soak the components until they are free of deposits; for stubborn or thick deposits use a soft brush to help the dissolving action

2nd for Circulation system Cleaning: Recirculation Method.
Use 100 to 150 ml of RXSOL Ice Machine Cleaner in 3 Ltr water in the machine. Allow cleaning solution to circulate for up to 10-20 minutes; it may be necessary to recirculate the solution for longer than 10 minutes to remove heavier and thicker scale deposits. Be sure all distribution and weep holes are clear.

How Scale formed in Ice Maker Machine?

Dissolved Mineral or presence of mineral present in water is cause of SCALE FORMATION in ICE MAKER. Water tries to freeze in its pure state, while mineral present in water getting precipitate. As the cycle continues and more water is made into ice, the minerals over concentrate and eventually precipitate as a lime scale deposit.

Why Regular Cleaning of SCALE is essential from Ice Maker?

Continiue deposition of minearal scale, obstracting water flow from holes, which causes reduction of ICE HARVEST. Extra deposition of scale makes ICE MAKER jam eventually the machine will shut down. This is reason why Once the machine is scaled up, it must be cleaned.

Images:

ZYME FC

Product Short Description: zyme FC is based on patented fatty acid degrading bacteria strains & biodegradable surfactants.

Product Technical Specification:

General
Invent Hazard Material (IMO/EU) classification	C-49
Physical properties
Appearance	Brown
Density	[g/ml] 1,0
Form	Liquid
pH	8-9,5

Remarks:

Features:
Excellent in-depth cleaning properties
Contains specialized patented bacterial strains forming enzymes that break down fatty acid components of grease
Safe to use on all surfaces
Environmentally friendly.

Images:

LiveChat

Search form

SEA CLEAN OIL

Marine Descaler

Water Heater Geyser Cleaner

Aqua Clean Tuff High Foam

Removal of cargo residue:

Loose Rust & Paint Scale:

Cleanliness of cargo hold bilges :

Water Spirit Main Alternator Cleaner

Urea Solution Standard

Ice Machine Cleaner and Sanitizer

EASYKLEEN GALLEY PACK RX

EASYKLEEN ACCOMMODATION PACK RX

ZYME FC

RX SOL

LATEST POSTS

Buffer Cleaner

Caustic Soda

Find Us

LiveChat