Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
Your shopping cart is empty.
RXSOL has the wide range of chemicals for cleaning chemicals for any type of vessel Including those carrying coal petcock & related to get the cargo hold clean for the next cargo choice of suitable cleaning chemical is essential & very important when applied the chemical resident type apply as important role as a surface active agent need time to penetrate & to take outside particular from the hold surface
Hold Wash Concentrate RX is a powerful alkaline liquid cleaner specifically formulated for the cleaning of cargo holds, tanks, and decks after the carriage of difficult bulk cargoes. It effectively removes oily, greasy, and carbon-based residues as well as dirt and dust deposits from bulk loads such as coal, pet coke, sulphur, minerals, and fertilizers. The product is designed for use in high-pressure washing machines, spray systems, and manual cleaning, ensuring fast and efficient cleaning with minimal effort.
Refer this link for complete set of HOLD CLEANING KIT ::: http://rxmarine.com/Ship-hold-cleaning-kit-set-supplier
PROEDURE OF USE:-
1st Method:-
Mix 1 part of RXSOL-10-1005-025 with 2 -10 parts of water / GAS-OIL , For heavy oil,greasy surface use directly)Spray directly on the entire surface to be cleaned. This can be achieved by Hand spray / mechanical spray pump. Immediately after 2 -5 minute of spray the RXSOL-10-1005-025 starts its function. The Dirt, oil grease etc will loosen. 5 to 6 minutes after spraying start rinsing the system with water (High pressure recommended). Dirt and mud starts vanishing with cleaning media and water.
2nd Method:-
Application in immersion process with or without ultrasonic support, manual wipping.
3rd Method:-
RXSOL-10-1005-025 is also used in conjunction with alkaline degreasing bath at 3-5% (v/v) concentration for better and quick degreasing action. Eithers the bath is heated to be 70c or the solution can be stirred or air agitated.
Appearance /Physical state : Slightly viscous clear to slightly opaque Liquid
Odour : None Odour threshold : No available data
pH : 11.3 Relative evaporation rate : No available data
Melting point : No available data
Freezing point : -2°C
Boiling point : 100°C
Flash point : Not applicable (aqueous solution)
Auto-ignition temperature : No available data
Decomposition temperature : No available data
Flammability (solid, gas) : Not applicable (aqueous solution)
Vapour pressure : No available data
Relative vapour density at 20°C : No available data
Relative density : 1.0 to 1.01 @ 20°C
Density : No available data
Solubility : Dispersible
Viscosity : No available data
Explosive properties : No available data
Oxidising properties : No available data
Keep away from children. Refer MSDS before using this product.
RXSOL-22-2202-025 turned this vulnerability into an opportunity. "Back-Set" safely removes hardened concrete from a variety of difficult to clean surfaces. It break down the ionic bond in portland cement, releasing the cement from any surface to which it has adhered.
This liquid mixture specifically designed to deal with hard cases of cement cargo deposits or dry cement stains. Its proven advantage is the provision of immediate penetration and complete dissolution of cement, the result being a thorough cleaning.
Chemically Back-Set converts the positive ions in the hardened matrix into negative ions, which dissolves the cement into mud that can be rinsed away. Because it works chemically, rather than mechanically, Back-Set may be used to remove cured concrete, mortar, grout, and stucco from virtually any surface without harm.
ACTIVE MATTER : 98-100 %
WHY RXSOL-22-2202 is better ?
Biodegradable & non flammable , Economical very cost effective
Non-hazardous
Non-fuming
Safe for paint, chrome, aluminum, glass, rubber, plastic, brass & stainless
Dissolves cured cement, concrete, mortar, grout, stucco
Cleans aluminum
Also comes with a foaming spray nozzle
Will not remove rubberized cement
Suitable for the removal of cement deposits and dry stains.
Due to its higher concentration its chemical reaction is very fast.
It's chemical combination meet the requirements of paragraph 1.8.2 of the P&A Standards.
Cement Remover cum cleaner plays an important role to clean cement without scrubbing, which is resulting and damaging the smooth surface. Its simple application method also helps to save manpower. Youtube cement remover video available with this link https://www.youtube.com/watch?v=GJzrh60-q5w
RXSOL-16-1077-020 must be used in open or sufficiently ventilated areas. RXSOL-16-1077-020 should always be used concentrate (without mixing with other solvent.) For best results apply with either by brush, swab, or as a fine spray using suitable hand held spray equipment. Small components may be cleaned by brief immersion in a bath of RXSOL-16-1077-020. Never use RXSOL-16-1077-020 on a running generator or motor. RXSOL-16-1077-020 can be used to clean virtually all electrical equipment & components although is it possible it may affect some types of rubber & plastic . Either remove rubber & plastic parts from component or test on small area for any reaction before cleaning.
RXSOL-25-1005-025 Wax Based Heavy Duty Corrosion Protection Coating Lubrication and Demoulding Cleaning of Injection Mold thimble and Mold Rust Prevention.
Physical Properties:
| Melting point | 2450°C |
| Boiling Point | 3500°C |
| Density | 2.51 g/mL at 25 °C (lit.) |
| Solublity | insoluble in H2O, acid solutions |
| Form | Powder |
| Colour | Black |
| Specific gravity | 2.51 |
| Resistivity | 4500 (ρ/μΩ.cm) |
| Water solublity | Insoluble in water |
| Stability | Stable. Incompatible with oxidizing agents. Not flammable. |
| insoluble in H2O, acid solutions |
| insoluble in H2O, acid solutions |
RXSOL Boat Hull Cleaner strength resulting one step cleaning either its Gel Formula can be brush on or its liquid formula can be sprayed off on the entire boat or Hull area to remove sea growth and lime deposits. Its balance acidic formula immediately starts its function and Safe on aluminium boats and pontoons; Biodegradable, Non-flammable.
| Appearance | Clear liquid |
| Color | Colorless |
| Odor | Odorless |
| Initial Boiling Point | <240oC |
| Final Boiling Point | >262oC |
| Flash Point | 85oC |
| Autoignition Temperature | >220oC |
| Lower Explosion Limit (vol %) | <0.6% (v/v) |
| Upper Explosion Limit (vol %) | >5.5% (v/v) |
| Vapour Pressure | <0.0003 kPa at 20oC |
| Relative vapor density (air= 1) | <0.01 |
| Aromatics | < 0.4% |
| Specific Gravity (gr/cm3) | 0.81 at 200C |
| Solubility | Soluble |
| pH (in 1% dispersion) | 7 |
| Pour point (at 0°C) | - 30 |
| Viscosity (at 0°C) (cSt) | 3 |
We are marine chemical supplier since 1996.These Marine Chemicals include different sets of products such as Tank Cleaners, Maintenance Chemicals, Cooling Water Treatment Chemicals, Boiler Water Treatment Chemicals, Fuel Additives, etc.
Oman Chemical is leading one Largest Supplier, Manufacture a
Oman Chemical is leading one Largest Supplier, Manufacture a
