Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
SEA VOYAGE CLEAN Plus is Highly effective concentrated cleaner .
Versatile, can be used for a wide application range ( for TANK or general cleaning .)
Provides quick and thorough emulsifying action.
Can be used for cleaning , gas freeing of double bottom, deep and other fuel oil bunker tanks.
May also be used for cleaning and gas-freeing of crude and refined mineral oil cargo tanks.
It can be used as a general purpose cleaner to remove oil and grease deposits and cleaning of bilge spaces and engine rooms from soiled surfaces. Can be used for degreasing and cleaning engine cooling water systems
Maintenance Cleaning chemicals for RIGS and oil field industries. RIGWASH Powder is powerful degreasing and emulsifying cleaning chemicals. RXSOL BRAND is most popular brand in MARINE and Oil Field industries as RIGS and Oil Field CHEMICALS supplier. RXSOL BRAND have various grade of RIGS CLEANING Detergent which includes RIG WASH LIQUID
Rigwash is classified cleaning detergent for offshore oil and gas rigs, platforms, and associated equipment. RIGWASH developed such a way to use by high-pressure water jets, detergents, and degreasers to remove dirt, grease, oil, and other contaminants that may have accumulated on the surface of the rig or equipment.
Regular use of Rigwash is important for maintaining the safety and efficiency of the equipment and reducing the risk of corrosion and damage.
Appearance White free flowing crystalline powder
Density 1.98 SG
Bulk Density 71 to 78 Ib/ ft³
Aqueous Solubility Up to 24%, 278.9 gL of solution at 68˚F (20˚C)
Purity 98.83%-99%
K20 62% and above
Form | Liquid |
Colour | Colourless to slightly Yellow |
Odour | Sharp |
Flash Point | > 100C |
Density | 1.05-1.11 g/cm3 (25C) |
pH |
3 - 7 |
Non-Flammable
Safe Plant Handling
Low Odor
Provides corrosion protection in the liquid and the vapor phase
When used in hydrostatic testing the product provides protection in liquids below, above and at the liquid levels. Protection of recessed and hard to reach areas. Complicated valves and the interior surfaces of piping and equipment, which are often difficult or impossible to reach, are protected with true Vapor Corrosion Inhibitor action. Can be applied for hydrotest solution, metalworking fluids, coatings, adhesives and water treatment formulations.
Risk of serious damage to eyes. In case of contact with eyes, rinse immediately with plenty of water & seek medical advice. Wear suitable gloves and eye / face protection
Before handling the chemical products used in this process, the first aid and handling recommendations on the Material Safety Data Sheet for should be read, understood and followed. The industrial cleaning bath is acid and can burn skin and eyes. Refer to the Material Safety Data Sheet for recommendations for protective action.
Corrosion Inhibitor for Oil and Gas Processing are efficient corrosion inhibitors developped to protect oil and gas production installations against internal corrosion. This includes protection of water systems specific to oil fields (produced water disposal systems and production, treatment and injection waters facilities). Corrosion Inhibitor for Oil and Gas Processing offers an optimum corrosion inhibition whatever the fluid characteristics and field conditions: CO2 and/or H2S p
Description: Monoethylene Glycol
Test Description |
Specification Limits Min. Max. |
Unit of Measure |
Test Method |
Monoethylene Glycol |
50 |
%(w/w) |
|
Distilled Water |
50 |
%(w/w) ASTM E-203 |
|
Acidity (as acetic acid) |
0.001 |
%(w/w) ASTM D-1613 |
|
Iron |
0.1 |
ppm ASTM E-202 |
|
DEG |
05 |
%(w/w) SD-498 |
|
Aldehyde (as acetaldehyde Chloride) |
10 |
ppm |
|
Ash |
0.001 |
%(w/w) ISI 5295 |
|
pH at 20oC |
6.5 |
7.5 |
|
Appearance |
Clear |
Visual |
|
Specific Gravity 20/20oC |
1.01 |
1.01 |
|
UV Tansmittance wavelength % |
|||
220 |
70 |
nm |
|
275 |
90 |
nm |
|
350 |
98 |
nm |
PARAMETERS |
SPECIFICATIONS |
Appearance Non-Volatile Matter Colour APHA (25% Aq.solution) Iron Inhibitor (MMEHQ) |
Viscous Liq Clear Colourless To Loght Yellow Liquid 99.0 % Min. 100 Max. 10 ppm Max. 65-90 ppm |
Charge | Anionic |
Sp. Gravity | 1.05 to 1.1 |
Product Properties:-
Product Name |
STICNSOL (Wetting EmulsifyingAgent ) |
|
Active Matter |
100% |
|
Consistency |
Liquid |
|
Emulsifying Property |
Good for emulsification of Oils , Gum , Wax, Greases , Polymer & Solvents , TETRA CHLOROETHYLENE ( PC ) |
|
Wetting Property |
Good Wetting & Emulsifying Property |
|
Ionic Nature |
Non-Ionic |
|
Colour |
Pale Yellow |
|
Appearance |
Clear liquid |
|
Odour |
Pine based |
|
Moisture |
0.5 % (max) |
|
Density |
In g/cm3 at 15°C: 0.89 |
|
Flash Point |
(PMCC)°C: Above 63 |
|
Compatibility |
|
|
Metal |
No known effect |
|
Rubber |
May swell |
|
Synthetic rubber |
May swell |
|
PACKAGING |
Order No |
Size (in litres) |
|
RXSOL-15-1017 |
5,25 , 35 |
Safety And Handling:- “RXSOL-15-1017” is completely safe to handle, being non-toxic & non corrosive.As with all chemicals general safety and handling procedures apply.Avoid contact with eyes as irritation may occur. Do not take internally in case of contact with eyes, flush eyes immediately and cupiously with clean running water for 15- minutes and seek medical attention.
#RigWash_Liquid
#RigWash_manufacturerSupplier
#RigWash_IndiaUAEomam
#RigWash_Exporter
Appearance | : Clear Syrupy Liquid |
pH | : 7 - 8.5 |
Freezing Point (50% Vol) | : -35 ºC to -37 ºC |
Boiling Point | : 195 ºC - 198ºC |
Odour | : Characteristic |
Specific Gravity | : 1.112 - 1.115 |