Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
Properties :
Form | :Powder |
Colour | :Off-white |
Odour | :Odourless |
Flash point | :Not applicable |
Flammability | :Not flammable |
Bulk density | :Approx. 750 kg/m3 |
Self ignition | :Not self-igniting |
Explosion hazard | :Not explosive |
Fire promoting properties | :Not fire-propagating |
Solubility in water |
:Forms a viscous solution. |
PRODUCT NAME | : | PHOSPHORIC ACID |
CAS number | : | 7664-38-2 |
UN number | : | 1805 |
Formula | : | H3PO4 |
Odour | : | |
Solubility in water | : | COMPLETE , ( 5.48 g/mL ) |
Density | : | 1.834 at OC |
Boiling point | : | 213 OC |
Melting point | : | 42 OC |
Viscosity | : | 147 cP (100 %) |
Flashpoint | : | |
Explosive limits | : | |
Vapour pressure | : | 0 mbar at 20 OC |
Skin absorption/irritation | : | YES |
TLV Country NL Year 1995 | : | ppm 1 mg/m3 |
Pollution category 1994 | : | D |
Properties :
- Molecular formula: H3PO4
- Molar mass : 98.00 g/mol
- Appearance : white solid or colourless, viscous liquid (>42 °C)
- Density : 1.885 g/mL (liquid)1.685 g/mL (85 % solution)2.030 g/mL (crystal at 25 °C)
- Acidity (pKa): 2.148, 7.198, 12.375
Pure phosphoric acid is colorless, odorless and has sour odor.
Phosphoric acid is Soluble in water and ethanol. Easily absorb moisture. Easy to be crystallized under cold condition for long time.
Phosphoric Acid is Corrosive. Should be stored in closed containers.
PHYSICAL AND CHEMICAL PROPERTIES
Appearance & odour | Clear to slightly hazy aqueous solution |
Molecular weight | Not available |
Boiling point (ºC) | 100ºC |
Melting point (ºC) | Not available |
Specific Gravity (H2O = 1) | 1.08 - 1.12 at 25ºC |
pH | 3.5 to 4.0 at 25ºC |
Vapour pressure | Not available |
Relative vapour density | Not available or applicable |
12.5% wt. SODIUM HYPOCHLORITE - EXTRA - PURE
Parameters | Specification Range | Typical |
Sodium Hypochlorite as NaOCl (%wt) |
12.5 - 13.2 | 13.0 |
Available Chlorine (%wt) | 11.9 - 12.6 | 12.4 |
Available Chlorine (%vol) | 14.3 - 15.3 | 15.0 |
Available Chlorine grams/liter | 143 - 153 | 150 |
Excess Caustic (%wt) | 0.25 - 0.80 | 0.30 |
Specific Gravity @ 60°F | 1.197 - 1.220 | 1.210 |
pH | 12.0 - 13.0 | 12.50 |
Iron (Fe) ppm | <0.5 | 0.05 |
Nickel (Ni) ppm | <0.2 | 0.02 |
Copper (Cu) ppm | <0.2 | 0.05 |
Mercury (Hg) ppb | 0.001 - 0.003 | 0.002 |
Sodium Chloride (NaCl)% | <15.0 | 12.5 |
Appearance: Clear greenish-yellow liquid miscible in any proportion with water.
This product meets the requirements of NSF standard 60 for drinking water.
EMERGENCY AND FIRST AID PROCEDURES
EYE:
OBJECT IS TO FLUSH MATERIAL OUR IMMEDIATELY AND THEN SEEK MEDICAL ATTENTION IMMEDIATELY flush eyes with a directed stream of water at least 15 minutes while forcibly holding eye lids apart to ensure complete irrigation of all eye and lid tissue. Washing eyes within one (1) minute is essential to achieve maximum effectiveness. SEEK MEDICAL ATTENTION IMMEDIATELY.
SKIN:
SEEK MEDICAL ATTENTION IMMEDIAELY. Flush thoroughly with cold water under shower while removing contaminated clothing and shoes. CONTINUE TO FLUSH UNTIL MEDICAL ATTENTION ARRIVES. Discard non-rubber shoes. Wash clothing before reuse.
INIIALATION:
Remove to fresh air. If breathing is difficult, have trained person administer oxygen. If respiration stops, give mouth-to-mouth resuscitation. GET MEDICAL ATTENTION IMMEDIATELY.
INGESTION:
NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON. If swallowed, DO NOT INDUCE VOMITING. Give large quantities of milk or gelatin solution. If these are not available give large quantities of water. If vomiting occurs spontaneously, keep airway clear and give more milk, gelatin solution or water, GET MEDICAL ATTENTION IMMEDIATELY. Avoid vomiting, lavages or acidic antidotes. NOTE TO PHYSICIAN: Sodium Hypochlorite is an alkaline corrosive. For exposure by ingestion do not use emesis, lavages or acidic antidotes. Dilute immediately by giving milk, melted ice cream, beaten egg white, starch paste or antacids such as milk magnesia. Aluminum hydroxide gel or magnesium trisilicate gel. Avoid sodium bicarbonate because of carbon di-oxide release. Sodium thiosulphate solution may prove beneficial by reducing unreacted material
Chlorine scavengers are substances that react with chlorine or chlorine-generating materials to eliminate or reduce their bleaching activity and corrosion effects, often used in water treatment and other applications to remove chlorine.
TECHNICAL SPECIFICATION::