Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a

TESTING PROCEDURE :::
ANLYSIS PROCEDEURE OF SODIUM SILICATE : Take 5gm of sodium dilute it to 250ml in SMF with dist. Water , take 50 ml of the diluted solution add 2-4 drops of methyl red indicator. Then titrate it against IN {approx.} HCL Light Pink is the end point. Take this reading as “A” ml. To this solution add 5 gm of sodium fluoride dissolve properly add 6-7 drops of methyl red indicator titrate against IN HCL appearance of slight pink colour is the end point . Take this reading as “B” ml
CALCULATION For Na2O
“A”ml x 3.1 x normality of HCl = C%
Wt. Of sample
For Sio2
“B”ml x 15.02 x normality of HCl
Wt. Of sample X 10
Ratio of sodium silicate
% of SiO2 i.e D%
% of Na2o C%
Viscosity- AS PER IS 3944 B4 CUP
DETERMINATION OF IRON (as per Fe)
PRCEDURE :
Iron as Fe (%w) = 0.001 V
W
Where,
V= Volume in ml of Standard Iron Solution to add in Blank Reading
W= Weight in gm of sample
Sodium Silicate Liquid Neutral, Sodium Silicate Liquid Alkaline & Sodium Silicate Powder Neutral Manufacturer. We also keeping ready stock of these materials...
Sodium Silicate Liquid Neutral
Sodium Silicate Liquid Alkaline
Sodium Silicate Powder Neutral
Sodium Silicate Powder Alkaline
Sodium Silicate Glass Neutral
Sodium Silicate Glass Alkaline
Silica Gel
Sodium Silicate
Activated Carbon
Sodium Metasilicate
Silicate Chemicals


Aluminium oxide as Al2O3wt.% ::: 14.5-17.5
Iron oxide as EF2O3wt.% ::: 0.8 max
Insoluble matter wt.% ::: 0.5 max.
Arsenic as P.P .M ::: 10 Max.


| Emulsion: Silicone Antifoam Emulsion RXSOL-16-2066-210 | |
| Chemical Nature | Emulsion of a silicone antifoam compound |
| Appearance | White, homogeneous, slightly viscous liquid |
|
Viscosity at 25°C, cSt |
600 |
| Active Ingredients, % | 10 |
| Specific Gravity at 25°/25°C | 1 |
| pH | 7 |
| Emulsion Type | Non-ionic |
| Suitable Diluents | Water only |

Other names:Sodium hyposulfite, Hyposulphite of soda
Identifiers CAS number : 7772-98-7 Y, 10102-17-7 : (pentahydrate)
UNII :L0IYT1O31N Y
ChEMBL CHEMBL : 1201157 N
RTECS number :XN6476000
|
Molecular Formula |
Na2S2O3.5H2O |
|
Molar Mass |
158.11 g/mol |
|
Appearance |
Clear Liq |
|
Odor |
Odorless |
|
Density |
1.667 g/cm3 |
|
Melting Point |
48.3 °C (pentahydrate) |
|
Boiling Point |
100 °C (pentahydrate, - 5H2O decomp) |
|
Solubility in Water |
76.4 g/100 g H20(20 °C) |
IUPAC name :Sodium thiosulfate
Other names:Sodium hyposulfite ,Hyposulphite of soda
Identifiers
CAS number : 7772-98-7 Y,
10102-17-7 : (pentahydrate)
PubChem: 24477
ChemSpider :22885 Y
UNII :L0IYT1O31N Y
ChEMBL CHEMBL : 1201157 N
RTECS number :XN6476000
Keep away from heat as the potential for release of sulfur dioxide fumes exists. Liquid sodium thiosulfate has very low toxicity but routine safety precautions should be practiced. Rubber gloves, safety goggles and protective clothing is recommended.
Sodium Thiosulfate, wt%30 +/- 2%
Sulfite, wt%1.5 max.
pH 7.0 – 9.0
Physical Properties:
Specific Gravity @ 25o C 1.252 – 1.34
Density, lbs/gal @ 25o C 10.4 – 11.2


|
|
|
|
Properties |
|
|
Appearance |
Clear colorless to light-yellow liquid |
|
Melting point |
−26°C (247 K) |
|
Boiling point |
110 °C (383 K), 20.2% solution; |
|
Solubility in water |
Miscible |
|
Acidity (pKa) |
−8.0 |
|
Viscosity |
1.9 mPa s at 25° C, |
|
Flash point |
Non-flammable |

Specification
Sodium Chloride , NaCl
odorless, white color free flowing crystals Solution with water will be transparent
85% between 200 to 600 micron Sodium Chloride 99.6% Min on dry basis
Total calcium salt as Ca by mass Maximum 0.04 %
Total Magnesium salt as Mg by mass Maximum 0.04 %
Total Sulfates as SO4 by mass Maximum 0.1 %
Matter insoluble in water by mass Maximum 0.05 %
Iron compound as Fe Maximum 5 ppm
Non Caking agent Maximum 10 ppm
Alkalinity as Na2CO3 Maximum 500 ppm
Bulk density 1300 Kg/m3
Moisture Maximum 0.1 %
pH of 10% solution 7.5
