Grease Trap BioClean

Product Code: RXSOL-40-1599-025

Size:

Color:

Product Short Description: Designed for grease dispersion, odor control, and microbial growth inhibition in grease traps and wastewater systems
Product Technical Specification:
Parameter Specification
Appearance Clear to pale yellow liquid
Odour Mild characteristic
pH 6.0 - 8.0
Solubility Completely water soluble
Specific Gravity 0.95 – 1.05
Ionic Nature Cationic
Remarks:

Benefits you will see after using RXSOL Grease Trap BioClean for your waste treatment system

  • Reduces grease buildup over time
  • Maintains free-flowing drainage
  • Improves hygiene and sanitation
  • Long-term preventive solution
Images: Alt

Grease Trap Solv Cleaner

Product Code: RXSOL-40-2019-020

Size:

Color:

Product Short Description: Very effective cleaner for sticky Oily and Greasy mess, Fully active cleaner specially formulated for the removal of tuff oily stains residues, with out the need for Scrubbing or Brushing which can cause mechanical damages to surface and result in poor
Product Technical Specification:

Product Properties:-

Product Name 

Grease Trap Solv Cleaner (Wetting Emulsifying Agent )

Active Matter                    

100%

 

Consistency  

Liquid

 

Emulsifying Property       

Good for emulsification of Oils , Gum , Wax, Greases , Polymer & Solvents , 

 

Wetting Property        

Good Wetting & Emulsifying Property

 

Ionic Nature                     

Non-Ionic

 

Colour    

Pale Yellow

 

Appearance

Clear liquid

 

Odour                 

Pine based

 

Remarks:

For commercial kitchens and industrial facilities, grease trap maintenance is essential for compliance, safety, and uninterrupted operations. Grease traps are designed to capture fats, oils, and grease (FOG) before they enter sewer systems, where they can cause costly blockages, environmental damage, and regulatory violations. At RXSOL, we have experience working with industrial facilities to help clean and maintain their grease traps. Below, we answer the most common questions businesses ask about grease traps, how they work, and how to maintain them properly.

A grease trap (also called a grease interceptor) is a plumbing device that separates fats, oils, and grease from industrial wastewater before it reaches the sewer system. As wastewater flows through the trap: FOG rises and solidifies at the surface Solids sink to the bottom Treated water exits through an outlet pipe The trapped grease accumulates in the web while the treated wastewater continues its journey to the sewer system or a wastewater treatment plant. This separation protects plumbing infrastructure and municipal wastewater systems. So it means it is important for your business, but also for the entire sewer system

Images: Alt

Sodium Hypo Chlorite 8 to 12 pct

Product Code: RXSOL-40-3025-025

Size:

Color:

Product Short Description: Extra pure LAB TESTED Clear greenish-yellow liquid miscible in any proportion with water.
Product Technical Specification:

12.5% wt. SODIUM HYPOCHLORITE - EXTRA - PURE

Parameters Specification Range Typical

Sodium Hypochlorite

as NaOCl (%wt)

12.5 - 13.2 13.0
Available Chlorine (%wt) 11.9 - 12.6 12.4
Available Chlorine (%vol) 14.3 - 15.3 15.0
Available Chlorine grams/liter 143 - 153 150
Excess Caustic (%wt) 0.25 - 0.80 0.30
Specific Gravity @ 60°F 1.197 - 1.220 1.210
pH 12.0 - 13.0 12.50
Iron (Fe) ppm <0.5 0.05
Nickel (Ni) ppm <0.2 0.02
Copper (Cu) ppm <0.2 0.05
Mercury (Hg) ppb 0.001 - 0.003 0.002
Sodium Chloride (NaCl)% <15.0 12.5

Appearance: Clear greenish-yellow liquid miscible in any proportion with water.
This product meets the requirements of NSF standard 60 for drinking water.

 

1

Available Chlorine

14-16%

2

Ph

11-13.

3

Sp.Gravity

1.23 - 1.40

4

Free Alkali (Per Lts )

0.42to0.5%

5

Stability

2 to 3 Month ( GENERAL ATMOSPHRIC TEMP )

OR more stable Below 18°C

6

Viscocity

0.98

7

Alkalinity

1.99

8

Appearance

Pale yellow / green

9

Flash point

None

10

Turbidity

nil

11

CU

NIL

12

Biodegradable

Completely biodegradable

13

Free Acid

None

 

1

Available Chlorine

14-16%

2

Ph

11-13.

3

Sp.Gravity

1.23 - 1.40

4

Free Alkali (Per Lts )

0.42to0.5%

5

Stability

2 to 3 Month ( GENERAL ATMOSPHRIC TEMP )

OR more stable Below 18°C

6

Viscocity

0.98

7

Alkalinity

1.99

8

Appearance

Pale yellow / green

9

Flash point

None

10

Turbidity

nil

11

CU

NIL

12

Biodegradable

Completely biodegradable

13

Free Acid

None

 

Remarks:
What is the oxidation number and state of Chlorine Cl?

Chlorine can show multiple oxidation states from -1 to +7 , As chlorine have vacant d orbitals. Higher oxidation state are possible with highly oxidising elements like oxygen.
Images: Alt

Ferrous Chloride Anhydrous

Product Code: RXSOL-19-3302-025

Size:

Color:

Product Short Description: Is prepared by addition of iron powder to a solution of hydrochloride acid in methanol.
Product Technical Specification:
Remarks:
Images: Alt

Deflocculant Ceramic Slip Casting

Product Code: RXSOL-40-8142-250

Size:

Color:

Product Short Description: We supply both Neutral & Alkaline sodium silicate absolute transparent quality i.e. water white.
Product Technical Specification:

TESTING PROCEDURE :::
ANLYSIS PROCEDEURE OF SODIUM SILICATE : Take 5gm of sodium dilute it to 250ml in SMF with dist. Water , take 50 ml of the diluted solution add 2-4 drops of  methyl red indicator.  Then titrate it against IN {approx.}  HCL  Light Pink is the end point. Take this reading as “A” ml. To this solution add 5 gm of sodium fluoride dissolve properly add  6-7 drops of methyl red indicator titrate against IN HCL  appearance of slight pink colour is the end point . Take this reading as “B” ml 

 

CALCULATION For Na2O
 

“A”ml  x 3.1 x normality of HCl   = C%

               Wt. Of sample 


For  Sio2
 

“B”ml  x 15.02 x normality of HCl 

           Wt. Of sample X 10 

 

Ratio of sodium silicate 

 

% of SiO         i.e               D%

% of Na2o                          C%

 

Viscosity-  AS PER IS 3944 B4 CUP 

 

DETERMINATION OF IRON (as per Fe)

  • Botanic Potassium Thiocynate ;- dissolve 1.0gm of potassium thiocynate in10ml of water. Add sufficient n-butano to makeup to 100ml. Shake vigorously until the solution is clear.
  • Dilute H2SO4 :- approx.10% 
  • Standard Iron solution : weight 0.702gm of Ferrus Ammonium sulfate. Dissolve in 10ml dilute H2SO4 then make up 1000ml with water. Transfer 10 ml of this solution in 100ml M.Flask and make up 100ml with water. 1ml of this solution is equivalent to 0.01mg of iron 

 

PRCEDURE :

  • Sample Reading: take about 5gm of the sample accurately weighted. Dissolve it in distilled water and make the solution exactly 100ml. Take 10 ml of this solution add 1ml concentrated Nitric acid. Boil the solution and cool. Then transfer it into a nessler cylinder and add 30mg of Ammonium Persulfate and 15 ml of Botanic Potassium Thiocynate solution. Shake for 30 sec and allow the liquid to separate.
  • Blank reading : take 10 ml distilled water. Add 1ml concentrated Nitric acid boil the solution and cool. Then transfer it into a nesseler cylinder and add 30 mg of Ammonium Persulfate and 15 ml of Botanic Potassium Thiocynate solution . Shake for 30 sec. And allow the liquid to separate. Then add Standard Iron Solution until the colour of Butanol Layers in Both Cylinder (Sample & Blank) 
    CALCULATION :

Iron as Fe (%w)  =  0.001 V

                                     W

Where, 

V= Volume in ml of Standard Iron Solution to add in Blank Reading

W= Weight in gm of sample 

 

 

 

 

Remarks:

Sodium Silicate Liquid Neutral, Sodium Silicate Liquid Alkaline & Sodium Silicate Powder Neutral Manufacturer. We also keeping ready stock of these materials...
Sodium Silicate Liquid Neutral

Sodium Silicate Liquid Alkaline
Sodium Silicate Powder Neutral
Sodium Silicate Powder Alkaline
Sodium Silicate Glass Neutral
Sodium Silicate Glass Alkaline
Silica Gel
Sodium Silicate
Activated Carbon
Sodium Metasilicate
Silicate Chemicals

Images: Alt

Sodium Aluminate

Product Code: RXSOL-40-6263-100

Size:

Color:

Product Short Description: Sodium Aluminate is an inorganic chemical that is used as an effective source of aluminium hydroxide for many industrial and technical applications.
Product Technical Specification:
Remarks:
Images: Alt

Alum Liquid 30

Product Code: RXSOL-40-1171-025

Size:

Color:

Product Short Description: Alum is used for phosphate precipitation in water treatment plants under the process chemical precipitation of phosphate. . Alum is required as coagulant for water Treatment
Product Technical Specification:

Aluminium oxide as Al2O3wt.%  ::: 14.5-17.5
Iron oxide as EF2O3wt.%           :::  0.8 max
Insoluble matter wt.%                 :::  0.5 max.
Arsenic as P.P .M                       :::  10 Max.

Remarks:
Images: Alt

Primary Cationic Flocculant Sewage Treatment

Product Code: RXSOL-40-9103-010

Size:

Color:

Product Short Description: First Stage Clarifier for waste water treatment unit as an agglomerating agent
Product Technical Specification:
Specifications:
Organic cationic polymers or a mixture of organic / inorganic coagulants with high activity in liquid form.
Analyses of oily water to be treated are as follows:
PH : 7-10
Suspension soild: 650 PPM
Hydrocarbon : 500 PPM
Remarks:
Images: Alt

Defoamer Silicone Based

Product Code: RXSOL-40-2066-200

Size:

Color:

Product Short Description: RXSOL-16-2066-200 is antifoam emulsion and its more concentrated antifoam emulsion. It has excellent candidates for controlling foam in amine and glycol dehydration units. This is suitable products for gas plants and have excellent stability in the presence
Product Technical Specification:

 

Emulsion: Silicone Antifoam Emulsion RXSOL-16-2066-210
Chemical Nature Emulsion of a silicone antifoam compound
Appearance White, homogeneous, slightly viscous liquid

Viscosity at 25°C, cSt
600
Active Ingredients, % 10
Specific Gravity at 25°/25°C 1
pH 7
Emulsion Type Non-ionic
Suitable Diluents Water only
 
Remarks:
Images: Alt

Sodium Thiosulphate Solution

Product Code: RXSOL-40-2031-210

Size:

Color:

Product Short Description: Sodium Thiosulfate used as a water Dechlorinator also used in Pond Aquarium . This product also used as a Photography as a fixing agent hypo to dissolve unchanged silver salts from exposed negatives.
Product Technical Specification:
IUPAC name :Sodium thiosulfate

Other names:Sodium hyposulfite, Hyposulphite of soda

 Identifiers CAS number : 7772-98-7 Y, 10102-17-7 : (pentahydrate)

UNII :L0IYT1O31N Y

ChEMBL CHEMBL : 1201157 N

RTECS number :XN6476000

Molecular Formula

Na2S2O3.5H2O

Molar Mass

158.11 g/mol

Appearance

Clear Liq

Odor

Odorless

Density

1.667 g/cm3

Melting Point

48.3 °C (pentahydrate)

Boiling Point

100 °C (pentahydrate, - 5H2O decomp)

Solubility in Water

76.4 g/100 g H20(20 °C)

 

IUPAC name :Sodium thiosulfate
Other names:Sodium hyposulfite ,Hyposulphite of soda

 Identifiers

CAS number : 7772-98-7 Y,

10102-17-7 : (pentahydrate)

PubChem: 24477

ChemSpider :22885 Y

UNII :L0IYT1O31N Y

ChEMBL CHEMBL : 1201157 N

RTECS number :XN6476000

Remarks:

Keep away from heat as the potential for release of sulfur dioxide fumes exists. Liquid sodium thiosulfate has very low toxicity but routine safety precautions should be practiced. Rubber gloves, safety goggles and protective clothing is recommended. 

Sodium Thiosulfate, wt%30 +/- 2%
Sulfite, wt%1.5 max.
pH 7.0 – 9.0
Physical Properties: 
Specific Gravity @ 25o C 1.252 – 1.34
Density, lbs/gal @ 25o C 10.4 – 11.2

Images: Alt
stock-clearance.png