Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
Your shopping cart is empty.
STRUCTURE :
HEAD - Molecule have a long chain non polar Hydrocarbon, whose structure can be Studied as follows:-
Head : It is water soluble & ‘-‘Vely charged.
Tail : It is oil soluble.
CLEANSING ACTION
When solution water is poured over the DIRTY surface the hydrocarbon Tail of the each molecules peg in to it, while the (–ve) HEAD is held in water. The dirt or grease layer is then disloged from the skin by rubbing or from garment by tumbling and stirring. Each grease globule thus separated in PIN CUSHIONED by hydrocarbon TAILS with (-ve) HEADS out wards in water. The (-ve) HEAD globules keep apart by mutual repulsions & are said to have emulsified.The emulsified grease globules bearing dirt can be readly washed with water.
Total Matter, ppm Max : 100 - ASTM D5907
pH : 6.5 - 8.5 ASTM D1293
Sodium + Potassium ppm, Max : 25 ASTMD4191 &4192
The water doesn’t contain larger suspended particle more then 100 microns
| MONO ETHYLENE GLYCOL | ||
| Test | Typical Value | Test Method |
|
Distillation Range °C |
194° 205° |
ASTM D-1078 |
|
Moiture Content % wt. Max.
|
0.2
|
ASTM E-203
|
|
Acidity as Acetic acid % wt. Max.
|
0.005
|
ASTM D-1613
|
|
Iron Cotent, ppm Weight Max.
|
0.2
|
ASTM E-202
|
|
Chloride as CI ppm, Weight Max.
|
0.2
|
SD A-167
|
|
Ash % Weight Max.
|
0.005
|
ISI 5295
|
|
DEG, % Weight Max.
|
0.2
|
SD-498
|
|
Colour (Pt. Co. scale) Max.
|
10
|
ASTM D-1209
|
Pure MEG is always costing more then distilled one. As in market various sources of MEG are available. And most of them are supplying Bye Products which contains many unwanted impurities. Our products are well tested with purity of 99.5%
| Dosage Chart for Rock and Roll Cleaning | |||
| Fuel Oil Viscositry Centistokes at 50°C | RXSOL-20-2055-025 / 1000 Ltsof water | ||
| 1st Stage | 2nd Stage | ||
| Over 320 and sludge tanks | 1 litre | 1 litre | |
| 150 - 300 | 1 litre | 0.75 litre | |
| Up to 50 | 0.5 litre | .... | |
| PHYSICAL PROPERTIES | |||
| COLOUR | Light brown liquid | ||
| DENSITY | In g/cm3 at 15°C: 0.9 | ||
| FLASH POINT | Above 70 °C | ||
| PACKAGING | RXSOL-20-2055-025 |
Size (in litres) 20 , 25 , 35 , 210. |
|
This product is an effective liquid blend of concentrated emulsifier with penetrating agents as solvent and wetting agents which makes this an excellent liquid scouring cleansers for cleaning and degreasing of double bottom, deep tanks etc which is used for fuel oils It can also be used for BOILERS , MARINE DIESEL ENGINE COOLING WATER SYSTEM and for local cleaning and degreasing of engine rooms on deck.
During Tank cleaning operation Double Bottom Tanks. Time, temperature and mixing agitation of cleaning solution plays the very important role for tank cleaning.
12.5 percent wt. - EXTRA - PURE
| Parameters | Specification Range | Typical |
|
Chlorine Mix |
12.5 - 13.2 | 13.0 |
| Available Chlorine (%wt) | 11.9 - 12.6 | 12.4 |
| Available Chlorine (%vol) | 14.3 - 15.3 | 15.0 |
| Available Chlorine grams/liter | 143 - 153 | 150 |
| Excess Caustic (%wt) | 0.25 - 0.80 | 0.30 |
| Specific Gravity @ 60°F | 1.197 - 1.220 | 1.210 |
| pH | 12.0 - 13.0 | 12.50 |
| Iron (Fe) ppm | <0.5 | 0.05 |
| Nickel (Ni) ppm | <0.2 | 0.02 |
| Copper (Cu) ppm | <0.2 | 0.05 |
| Mercury (Hg) ppb | 0.001 - 0.003 | 0.002 |
| Sodium Chloride (NaCl)% | <15.0 | 12.5 |
Appearance: Clear greenish-yellow liquid miscible in any proportion with water.
This product meets the requirements of NSF standard 60 for drinking water.
Never use materials without proper knowledge and guideline, Refer MSDS and Technical bulletine before uses of this product.
We are marine chemical supplier since 1996.These Marine Chemicals include different sets of products such as Tank Cleaners, Maintenance Chemicals, Cooling Water Treatment Chemicals, Boiler Water Treatment Chemicals, Fuel Additives, etc.
Oman Chemical is leading one Largest Supplier, Manufacture a
Oman Chemical is leading one Largest Supplier, Manufacture a
