Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
Product Code: RXSOL-16-1029-020
STRUCTURE :
HEAD - Molecule have a long chain non polar Hydrocarbon, whose structure can be Studied as follows:-
Head : It is water soluble & ‘-‘Vely charged.
Tail : It is oil soluble.
CLEANSING ACTION
When solution water is poured over the DIRTY surface the hydrocarbon Tail of the each molecules peg in to it, while the (–ve) HEAD is held in water. The dirt or grease layer is then disloged from the skin by rubbing or from garment by tumbling and stirring. Each grease globule thus separated in PIN CUSHIONED by hydrocarbon TAILS with (-ve) HEADS out wards in water. The (-ve) HEAD globules keep apart by mutual repulsions & are said to have emulsified.The emulsified grease globules bearing dirt can be readly washed with water.

Product Code: RXSOL-61-2701-025

Product Code: RXSOL-20-2204-025
Total Matter, ppm Max : 100 - ASTM D5907
pH : 6.5 - 8.5 ASTM D1293
Sodium + Potassium ppm, Max : 25 ASTMD4191 &4192
The water doesn’t contain larger suspended particle more then 100 microns

Product Code: RXSOL-16-1023-025

Product Code: RXSOL-31-3022-010
Advance Cleaner suitable for PRESSURE washing equipment, Also have pleasant odour and safe to the persons handling it . Can be used as a multipurpose cleaner for tank or general cleaning and all types of cleaning and degreasing operations.
Advance general cleaner Degreaser suitable for PRESSURE washing equipment, Can be used as a multipurpose cleaner for tank or general cleaning.
Refer MSDS of Enviro 2000 before its application.

Product Code: RXSOL-20-2055-025
| Dosage Chart for Rock and Roll Cleaning | |||
| Fuel Oil Viscositry Centistokes at 50°C | RXSOL-20-2055-025 / 1000 Ltsof water | ||
| 1st Stage | 2nd Stage | ||
| Over 320 and sludge tanks | 1 litre | 1 litre | |
| 150 - 300 | 1 litre | 0.75 litre | |
| Up to 50 | 0.5 litre | .... | |
| PHYSICAL PROPERTIES | |||
| COLOUR | Light brown liquid | ||
| DENSITY | In g/cm3 at 15°C: 0.9 | ||
| FLASH POINT | Above 70 °C | ||
| PACKAGING | RXSOL-20-2055-025 |
Size (in litres) 20 , 25 , 35 , 210. |
|
This product is an effective liquid blend of concentrated emulsifier with penetrating agents as solvent and wetting agents which makes this an excellent liquid scouring cleansers for cleaning and degreasing of double bottom, deep tanks etc which is used for fuel oils It can also be used for BOILERS , MARINE DIESEL ENGINE COOLING WATER SYSTEM and for local cleaning and degreasing of engine rooms on deck.
During Tank cleaning operation Double Bottom Tanks. Time, temperature and mixing agitation of cleaning solution plays the very important role for tank cleaning.

Product Code: RXSOL-19-1210-025
| MONO ETHYLENE GLYCOL | ||
| Test | Typical Value | Test Method |
|
Distillation Range °C |
194° 205° |
ASTM D-1078 |
|
Moiture Content % wt. Max.
|
0.2
|
ASTM E-203
|
|
Acidity as Acetic acid % wt. Max.
|
0.005
|
ASTM D-1613
|
|
Iron Cotent, ppm Weight Max.
|
0.2
|
ASTM E-202
|
|
Chloride as CI ppm, Weight Max.
|
0.2
|
SD A-167
|
|
Ash % Weight Max.
|
0.005
|
ISI 5295
|
|
DEG, % Weight Max.
|
0.2
|
SD-498
|
|
Colour (Pt. Co. scale) Max.
|
10
|
ASTM D-1209
|
Pure MEG is always costing more then distilled one. As in market various sources of MEG are available. And most of them are supplying Bye Products which contains many unwanted impurities. Our products are well tested with purity of 99.5%

Product Code: RXSOL-31-3034-025
12.5 percent wt. - EXTRA - PURE
| Parameters | Specification Range | Typical |
|
Chlorine Mix |
12.5 - 13.2 | 13.0 |
| Available Chlorine (%wt) | 11.9 - 12.6 | 12.4 |
| Available Chlorine (%vol) | 14.3 - 15.3 | 15.0 |
| Available Chlorine grams/liter | 143 - 153 | 150 |
| Excess Caustic (%wt) | 0.25 - 0.80 | 0.30 |
| Specific Gravity @ 60°F | 1.197 - 1.220 | 1.210 |
| pH | 12.0 - 13.0 | 12.50 |
| Iron (Fe) ppm | <0.5 | 0.05 |
| Nickel (Ni) ppm | <0.2 | 0.02 |
| Copper (Cu) ppm | <0.2 | 0.05 |
| Mercury (Hg) ppb | 0.001 - 0.003 | 0.002 |
| Sodium Chloride (NaCl)% | <15.0 | 12.5 |
Appearance: Clear greenish-yellow liquid miscible in any proportion with water.
This product meets the requirements of NSF standard 60 for drinking water.
Never use materials without proper knowledge and guideline, Refer MSDS and Technical bulletine before uses of this product.

Product Code: RXSOL-16-1024-025
| Parameter | Specification |
|---|---|
| Appearance | Clear to slightly hazy liquid |
| Color | Colorless to pale yellow |
| Odor | Odorless |
| pH | Strongly alkaline |
| Potassium Hydroxide Content | 20 - 25% |
| Density at 25°C | 1.20 ± 0.05 g/cm³ |
| Solubility in Water | Completely miscible |
| Conductivity | High |
| Flammability | Non-flammable |
How to measure performance of Electrolyte Liquid
The potassium hydroxide content supports efficient ionic movement, helping maintain electrochemical performance in suitable battery systems.
The solution maintains a strongly alkaline medium necessary for applications requiring high pH conditions.
Prepared from high-purity potassium hydroxide to reduce contamination risk and unwanted side reactions caused by impurities.
Density is maintained within 1.20 ± 0.05 to support batch consistency and predictable performance.
Supplied as a ready-to-use liquid, reducing dissolution time and handling complexity compared with solid alkali.

Product Code: RXSOL-19-1182-025
