pH Neutralizer Amine

Get MSDS Get Technical Bulletin Connect on WhatsApp

Product Code: RXSOL-24-1461-225

Size:

Color:

Product Short Description: pH Neutralizer Amine is a colorless to pale yellow, hygroscopic viscous liquid with slight ammoniacal odor. We are supplier and exporter of TEA.
Product Technical Specification:

PRODUCT NAME  : AMINE based pH Neutralizer 
Formula         : (HOC2H4)3N
Odour    : SLIGHTLY AMMONIACAL
Solubility in Water    : COMPLETE
Density : More than 1    at 20   oC
Boiling point    : 360 oC
Melting point  : 21 oC
Flashpoint            : 190 oC
Explosive limits      : 1.2 -  Vol%
Vapour pressure       : .03 mbar at 20 oC
Skin absorption/irritation           : YES
TLV       Country  NL             Year  1995   :  
Pollution category  1994 : D
Remarks:

If RXH is not acid enough to release a proton at alkaline pH, as it is the case with amines, then the reaction has to be carried out in two steps. During the first step the first EO mole is added at acid pH, so that the amine is transformed in ammonium. The reaction produce the mono-, di- and tri-ethanol amines. 

Proton release from ammonium NH4+ → NH3 + H+ (here RX- is NH3) Then, the three condensation reactions: 

 

NH3 + EO → NH2CH2CH2OH (mono-ethanol amine MEA)
NH2CH2CH2OH + EO → NH(CH2CH2OH)2 (di-ethanol amine DEA)
NH-(CH2CH2OH)2 + EO → N(CH2CH2OH)3 (tri-ethanol amine TEA) 

With an alkyl amine, first the alkyl ammoniumion is formed and it is deprotonated: 

RNH3+ → RNH2 + H+ (here RX- is RNH2)
RNH2 + EO → RNH-CH2CH2OH (mono-ethanol alkyl amine)
RNH-CH2CH2OH + EO → RN(CH2CH2OH)2 (di-ethanol alkyl amine) 

Once the ethanol amine is attained, the EO polycondensation is carried out at alkaline pH as previously. In many instance the first ethoxylation is stopped when the monoethanol alkyl amine is formed in order to avoid the polycondensation in more than one chain. 

 PRODUCT NAME  : TRI ETHANOL AMINE 
 CAS number       : 102-71-6
 UN number       :  
 Formula         : (HOC2H4)3N
Odour    : SLIGHTLY AMMONIACAL
Solubility in water    : COMPLETE
Density : 1.13     at 20    oC
Boiling point    : 360 oC
 Melting point  : 21 oC
  Viscosity          :  
 Flashpoint            : 190 oC
 Explosive limits      : 1.2 - ? Vol%
 Vapour pressure       : .03 mbar at 20 oC
 Skin absorption/irritation           : YES
 TLV       Country  NL             Year  1995   :  
 Pollution category    1994      : D
 
Images: Alt

Methyl Diethanolamine MDEA

Get MSDS Get Technical Bulletin Connect on WhatsApp

Product Code: RXSOL-81-8205-230

Size:

Color:

Product Short Description: A colorless to yellow liquid tertiary amine compound with an ammonia-like odor. It is completely soluble in water.
Product Technical Specification:

 

Property

Value

 

 

Physical state

 Liquid

 

Color

 Colorless

 

Odor

 Ammonia-like

 

Density

1.04 g/cm @ 20°C

 

Melting / boiling point

-21.3 / 243.3 °C

 

Explosive properties

No data available

 

Self-ignition temperature

 280 °C

 

Vapor pressure

0.1 hPa @ 54.8°C

 

Mol weight

119.16 g/mol

 

Water solubility

 Soluble

 

Flash point

 138°C

 

 

 
                         
Molecular Formula         C5H13NO2
Molecular Weight   119.16 g/mol
Autoignition Temperature 280 °C
Critical Pressure 37 000 hPa
Critical Temperature  404 °C
Dissociation constant 25°C 8.68
Freezing Point 21.3 °C
Heat Capacity 20°C 1.72 kJ/kg·K
Heat of Formation   91 649 kJ/kmol
Heat of Vaporization           418.7 kJ/kg
Octanol-water partition coefficient, log Pow
(pH 10.5; at 23°C) 
 1.16
Refractive Index 20°C 1.4642
Vapor Density (air = 1) 4
Vapor Pressure 20°C 0.0031 hPa
Viscosity 20°C 99.05 mm2
 
Remarks:
Future & Benefit :
  • Degradation resistance
  • High solvent loading
  • Low capex and opex
  • Low corrosiveness
  • Low energy requirements
  • Low solvent make-up Selectivity
Compatibility and Solubility:
 
Methyl Diethanolamine is miscible in all proportions with water. It is also soluble in most organic solvents. Chemically it acts as both a tertiary amine and an alcohol. Neutralisation of the amino function by acids results in salt formation. The product is stable at elevated temperatures but must be kept away from oxidants and acids.
 
 
Amine Gas Treatment Unit system simulation:
 
Based upon feed gas conditions, the installation design and type of amine, unit performance can be predicted and optimized. The simulation output and reporting are tailored towards your needs and focus on the issues at hand. These simulations combined with our application experience allow us to provide you with feedback on how to improve the amine gas treatment unit operations (financial, operational and quality) and to tailor our amine formulations to maximize performance, such as energy reduction and reduced amine consumption.
 
Technical support:
 
Technical support is provided to all RXSOL  users. Our experienced team of engineers is available around the clock to respond to your questions. On-site troubleshooting by an experienced engineer can also be arranged. Rxsol Chemo Pharma International  can assist you with root cause analysis and operational recommendations for issues such as off- spec treated gas, foaming, high amine losses, high energy consumption, under capacity, corrosion etc.
 
Amine analysis:
 
Detailed chemical analysis of your amine solution is a key tool to determine the overall quality of the system and identify the root cause for problems such as foaming, corrosion, off spec product etc.RXSOL’s lab, highly experienced in amine analysis and interpretation, is at your disposal. Analysis of lean amine samples includes (a.o): sample appearance, physical-chemical properties, determination of free and bonded amine, acid gas loading foam test, metal scan etc. The results of the analysis are interpreted by our specialist team and the necessary recommendations are provided. The frequency, content and reporting of the analyses is customized towards your needs. Full results are typically available within 7 working days after receipt of the samples.
 
Sample kits : 
 
Sample shipping kits and detailed analytical procedures are available to our customers upon request.
 
Packaging
  • Bulk
  • Plastic drums (230 kg net)
  • IBC containers (1150 kg net)
 
Storage:
 
 
Copper and copper alloys should be avoided.For bulk storage a nitrogen atmosphere is necessary to prevent the absorption of moisture and discoloration.
 
 
 
Images: Alt

Silica Gel Orange to White

Get MSDS Get Technical Bulletin Connect on WhatsApp

Product Code: RXSOL-24-1998-025

Size:

Color:

Product Short Description: Orange Silica Gel helps to detect humidity of transformer oil by changing its colour, Humidity is main causes of fluctuation of DIELECTRIC STRENGTH
Product Technical Specification:

 

TECHNICAL SPECIFICATION Of  ORANGE SILICA GEL 

DESCRIPTIONS

SILICA GEL ORANGE  BEADS

Assay (as SiO2)

98 %

pH

4-6
Melting point 1610oC
Boiling Point 2230oc

Bulk Density gm/ltr

0.670 – 0.780
Density  2.6

Loss on Drying %

4 - 6 %

Loss on Attrition

2.5 % Max

Adsorption Capacity at 100 % humidity

35 - 40 %

Friability

99.5

Chloride (as Nacl)

Max. 0.5% ppm

Sulfates (as Na2SO4)

Max 0.5 % ppm

Cobalt Chloride (as CaCl2)

0.5 – 0.7 %

Ammonium Compound (as NH3)

0 %

Binder as CaSO4

0 %

Dimethyl Fumrate (DMF)

0 %

Particle size

4 - 6

 

COLOUR CHANGE 

RH =20 %

RH =50 %

RH = 100 %



ORANGE

PALE ORANGE

ALMOST COLORLESS

 

Remarks:

Silica Gel Details
CAS No. : 112926-00-8
Chemical Name : Silica gel
CBNumber : CB1199389
Molecular Formula : O2Si
Formula Weight : 60.08

Images: Alt

Aromatic Essential Oil

Get MSDS Get Technical Bulletin Connect on WhatsApp

Product Code: RXSOL-24-8450-001

Size:

Color:

Product Short Description: Aromatic Essential Oil
Product Technical Specification:
Essential oils are highly concentrated liquids that can be harmful if not used carefully. By treating essential oils as medicines and following the steps outlined below, you will be well on your way to safely enjoying the many benefits that aromatherapy can offer.

These safety guidelines are not a complete safety reference for the proper use of essential oils. When in doubt, consult your physician and/or a qualified and trained aromatherapy practitioner.

Do not use undiluted essential oils on the skin. Some oils can cause sensitization or allergic reactions in some individuals. When using a new oil for the first time, do a skin patch on a small area of skin. Place a small amount of the diluted essential oil on the inside of your elbow and apply a bandage. Wait 24 hours to see if there is any form of reaction. Some essential oils should be avoided during pregnancy or by those suffering from asthma, epilepsy, or with other health conditions.

When using essential oils, use the smallest amount of essential oils that will get the job done. Do not use two drops, if the job is done from one drop. Not all essential oils are suitable for use in aromatherapy. Keep essential oils away from the reach of children. Keep them out of the way of fire hazards.

Essential oils should not be taken internally and should only be taken internally after receiving a detailed consultation and prescription from a trained and qualified aromatherapy practitioner.
Remarks:
Images: Alt

Type C Silica Gel

Get MSDS Get Technical Bulletin Connect on WhatsApp

Product Code: RXSOL-24-6014-325

Size:

Color:

Product Short Description: C-Type Silica Gel is also known as macro-pored a SILICA GEL. available in Spherical/Beads and Irregular/Crystal shape.
Product Technical Specification:

SPECIFICATION FOR TYPE C SILICA GEL:

Loss on drying : Not more that 5% mass
Absorption Capacity : 27% min on the basis of mass
PH : 3.5 to 8.
Chlorides : 0.05% by mass max
Cobalt (as CoCl2) : 0.4 by mass max
Ammonium compounds (as NaH3): 0.5% by mass max
Sulphates (Na2SO4) : 0.5% by mass max
Industrial Packing: 25 / 50 kgs M S drum (Smaller packing available).
 

Characteristics :

Color Grey
Purity 99%
Form Crystal
Packaging Type HDPE Bag
Density 700 kg/m³
Molar Mass 60.08 g/mol
Remarks:
Images: Alt

Type B Silica Gel

Get MSDS Get Technical Bulletin Connect on WhatsApp

Product Code: RXSOL-24-6014-225

Size:

Color:

Product Short Description: B type silicagel Used for moisture control and Adsorbs water vapor at high humidity and releases it at low humidity
Product Technical Specification:

SPECIFICATION FOR TYPEB SILICA GEL:

Loss on drying : Not more that 5% mass
Absorption Capacity : 27% min on the basis of mass
PH : 3.5 to 8.
Chlorides : 0.05% by mass max
Cobalt (as CoCl2) : 0.4 by mass max
Ammonium compounds (as NaH3): 0.5% by mass max
Sulphates (Na2SO4) : 0.5% by mass max
Industrial Packing: 25 / 50 kgs M S drum (Smaller packing available).
 

Characteristics :

Material Natural Quartz
Color Multicolor
Purity 99%
Feature Premium Quality, Safe Packaging
Packaging Bag
Form Crystal
 
Remarks:
Images: Alt

Type A Silica Gel

Get MSDS Get Technical Bulletin Connect on WhatsApp

Product Code: RXSOL-24-6014-125

Size:

Color:

Product Short Description: A-Type Silica Gel contains fine pores & has large internal surface area. Having high moisture-absorbing capacity at low humidity, our A-Type Silica Gel is used as a desiccant for storing food and metal parts
Product Technical Specification:

SPECIFICATION FOR SILICA GEL INDICATING (BLUE) / NON INDICATING (WHITE):

Loss on drying : Not more that 5% mass
Absorption Capacity : 27% min on the basis of mass
PH : 3.5 to 8.
Chlorides : 0.05% by mass max
Cobalt (as CoCl2) : 0.4 by mass max
Ammonium compounds (as NaH3): 0.5% by mass max
Sulphates (Na2SO4) : 0.5% by mass max
Industrial Packing: 25 / 50 kgs M S drum (Smaller packing available).
 

Characteristics :

Color Grey
Purity 99%
Feature Premium Quality, Safe Packaging
Packaging Bag
Form Crystal
Sachet Pack Size 1-10kg
Remarks:
Images: Alt

Silica Gel Blue Beads

Get MSDS Get Technical Bulletin Connect on WhatsApp

Product Code: RXSOL-24-1998-001

Size:

Color:

Product Short Description: When free from moisture the Granules or beads are dark blue in color. As the beads takes up moisture, they turns to light blue gradually they turn pink.
Product Technical Specification:

 

TECHNICAL SPECIFICATION

DESCRIPTIONS

SILICA GEL BLUE

Assay (as SiO2)

98 %

pH

6.8 - 7.2
Melting point 1610oC
Boiling Point 2230oc

Bulk Density gm/ltr

0.600 – 0.700
Density  2.6

Loss on Drying %

4 - 6 %

Loss on Attrition

2.5 % Max

Adsorption Capacity at 100 % humidity

35 - 40 %

Friability

99.5

Chloride (as Nacl)

Max. 0.5% ppm

Sulfates (as Na2SO4)

Max 0.5 % ppm

Cobalt Chloride (as CaCl2)

0.5 – 0.7 %

Ammonium Compound (as NH3)

0 %

Binder as CaSO4

0 %

Dimethyl Fumrate (DMF)

0 %

Particle size

4 - 6

 
Remarks:

Silica Gel Details
CAS No. : 112926-00-8
Chemical Name : Silica gel
CBNumber : CB1199389
Molecular Formula : O2Si
Formula Weight : 60.08

Images: Alt

SILICA GEL WHITE

Get MSDS Get Technical Bulletin Connect on WhatsApp

Product Code: RXSOL-24-6014-025

Size:

Color:

Product Short Description: Silica gel White in 10 gram to 1 Kg pack and also in 25 Kg.
Product Technical Specification:

SPECIFICATION FOR SILICA GEL INDICATING (BLUE) / NON INDICATING (WHITE):

Loss on drying : Not more that 5% mass
Absorption Capacity : 27% min on the basis of mass
PH : 3.5 to 8.
Chlorides : 0.05% by mass max
Cobalt (as CoCl2) : 0.4 by mass max
Ammonium compounds (as NaH3): 0.5% by mass max
Sulphates (Na2SO4) : 0.5% by mass max
Packing: 25 / 50 kgs M S drum (Smaller packing available).
 
Remarks:
Images: Alt

Formalin

Get MSDS Get Technical Bulletin Connect on WhatsApp

Product Code: RXSOL-24-1191-230

Size:

Color:

Product Short Description: organic compound containing a terminal carbonyl group. It is a colorless.
Product Technical Specification:

Property Value : Color Clear

Appearance Liquid
Purity 37% (±0.5%)
Specific gravity 1.098 - 1.114
Methanol 0.8% TO 6.0%
Acidity 0.05% (MAX)
Iron 10 PPM (MAX)
PH (Aqueous Solution) 2.8 TO 4.0
PRODUCT NAME   : FORMALDEHYDE(SOL)FORMALIN 
CAS number  : 50-00-0
UN number     : 2209
Formula    : HCHO
Odour  : STRONG, PUNGENT
Solubility in water   : COMPLETE
Boiling point       : 97 oC
Melting point       :  -15 oC
Viscosity    :  
Flashpoint  : 60 oC
Explosive limits  :  
Vapour pressure    : 44 mbar at 20  oC
Skin absorption/irritation     : YES
TLV       Country  NL             Year  1995     : 1 ppm 1.5 mg/m3
Pollution category    :
C
 
Remarks:

FORMALIN - Formaldehyde is one of the most versatile chemicals and other industries to produce a virtually unlimited indispensable products used in daily life such as: amino resins and adhesives, phenolic resins, acetylic chemical, polyacetal resins, trimethylene diphenyl isocyanate (MDI), pentaerytriol, HMTA, para-formaldehyde, chelating agents, Tri-Methylol Ethane (TME), Pyridine chemicals, NPG (Neo Penthyle Glycol) and Nitro paraffin derivatives.


- A powerful general disinfectant
- A broad spectrum germicide
- Bactericidal and virucidal
- Very economical cost in use
- It has strong effects on IB, NB, FB viruses
- Used for wheel dipping
- Biological preservation
STORAGE: 
Store the original container in cool and dry place away from food and feeding stuff.

PACKING  : 25 , 50 & 210 Ltrs

PRECAUTIONS :  Wear suitable protective clothes during application of Formalin
- Keep away from heat and open flame
- Don’t discard the product residual or its empty containers in water bodies
- Keep away from the reach of children

Images: Alt
stock-clearance.png