Your shopping cart is empty.
Product Code: RXSOL-25-3044-025
Appearance /Physical state : Slightly viscous clear to slightly opaque Liquid
Odour : None Odour threshold : No available data
pH : 11.3 Relative evaporation rate : No available data
Melting point : No available data
Freezing point : -2°C
Boiling point : 100°C
Flash point : Not applicable (aqueous solution)
Auto-ignition temperature : No available data
Decomposition temperature : No available data
Flammability (solid, gas) : Not applicable (aqueous solution)
Vapour pressure : No available data
Relative vapour density at 20°C : No available data
Relative density : 1.0 to 1.01 @ 20°C
Density : No available data
Solubility : Dispersible
Viscosity : No available data
Explosive properties : No available data
Oxidising properties : No available data
Keep away from children. Refer MSDS before using this product.
Product Code: RXSOL-33-3322-020
| Property | Typical Value |
|---|---|
| Appearance | White powder |
| Odour | Mild |
| Bulk density | ~1.20 – 1.30 g/cm³ |
| Solubility | Soluble in water |
| pH (1% aqueous solution) | < 2.0 |
| Freezing point | Not applicable |
| Stability / Shelf Life | 2 years under normal conditions, stored dry and sealed |
Product Code: RXSOL-15-1008-005
PRODUCT PROPERTIES :
| Appearance | White – Powder |
| Density | 1.2g/cm3 |
| pH | Acidic |
| Compatibility | |
| Metal | Avoid aluminium, zinc, tin and their alloys. Avoid galvanised surfaces |
| Rubber | No known effect |
Product Code: RXSOL-20-2107-025
Product Code: RXSOL-20-2106-025
Product Code: RXSOL-44-7701-025
Physical Properties:
| Density | 2.7 |
| Form | Solid |
| Colour | White Powder |
| Odour | Odourless |
| Water solublity | Insoluble in water |
Product Code: RXSOL-17-1762-100
Product Code: RXSOL-19-6605-031
Product Code: RXSOL-19-3361-180
Specification :
| Physical state | Clear, liquid |
| Colour | Colorless |
| Odor | No data available |
| Melting point/freezing point | Melting point/range: < -50 °C at 1.013 hPa |
| Initial boiling point and boiling range | 94 °C - lit. |
| Flammability (solid, gas) | No data available |
| Upper/lower flammability or explosive limits | Upper explosion limit: 1,8 %(V) |
| Flash point | 19 °C - closed cup |
Product Code: RXSOL-41-4199-025
Bearing And Chain Cleaning Solution Silencer Pipe Cleaner Separator Cleaner is a colorless, strong acid, liquid cleaning agent with strong degreasing properties. This product can only be used on austenitic stainless steel and is corrosive on all other metals.
Specific Gravity (20°C) : 1.03 to 1.04
Flash point : None
pH (1% solution) : < 2
IMO-Code : 8-2031-T700.
NATURE OF SPECIAL RISKS AND SAFETY ADVICE
In accordance with the latest E.E.C. Council directives:
R 36 : Irritating to eyes and skin.
S 2 : Keep out of reach of children.
S 28 : After contact with skin rinse immediately with plenty of water.
Cleaning of Disc separator increasing clean oil separation efficiency to the engine which is directly increasing work out put of engine. More Detail of disc cleaner like MSDS and technical bulletines are available on through this LINK http://rxmarine.com/disc-cleaner-i-0 link .
PURIFIER DISC CLEANER is a concentrated liquid mixture especially designed to remove carbonaceous deposits from all types of lube and fuel oil separators. Its unique dual mechanism also helps to dissolve RUST from metal parts.
Keep container tightly closed to avoid contamination and always refer MSDS of Disc cleaner, before any kinds of application. MSDS of DISC Cleaner give full guideline to handle as per international rules and regulation.
Product Code: RXSOL-25-2202-002
RXSOL-22-2202-025 turned this vulnerability into an opportunity. "Back-Set" safely removes hardened concrete from a variety of difficult to clean surfaces. It break down the ionic bond in portland cement, releasing the cement from any surface to which it has adhered.
This liquid mixture specifically designed to deal with hard cases of cement cargo deposits or dry cement stains. Its proven advantage is the provision of immediate penetration and complete dissolution of cement, the result being a thorough cleaning.
Chemically Back-Set converts the positive ions in the hardened matrix into negative ions, which dissolves the cement into mud that can be rinsed away. Because it works chemically, rather than mechanically, Back-Set may be used to remove cured concrete, mortar, grout, and stucco from virtually any surface without harm.
ACTIVE MATTER : 98-100 %
WHY RXSOL-22-2202 is better ?
Biodegradable & non flammable , Economical very cost effective
Non-hazardous
Non-fuming
Safe for paint, chrome, aluminum, glass, rubber, plastic, brass & stainless
Dissolves cured cement, concrete, mortar, grout, stucco
Cleans aluminum
Also comes with a foaming spray nozzle
Will not remove rubberized cement
Suitable for the removal of cement deposits and dry stains.
Due to its higher concentration its chemical reaction is very fast.
It's chemical combination meet the requirements of paragraph 1.8.2 of the P&A Standards.
Cement Remover cum cleaner plays an important role to clean cement without scrubbing, which is resulting and damaging the smooth surface. Its simple application method also helps to save manpower. Youtube cement remover video available with this link https://www.youtube.com/watch?v=GJzrh60-q5w
Product Code: RXSOL-10-1713-220
| Property | Typical Value |
|---|---|
| Appearance | Clear to light yellow liquid |
| Odor | Pleasant citrus aroma |
| pH (1% solution) | 6.5 – 7.5 (near neutral) |
| Specific Gravity | 0.95 – 1.00 @ 25°C |
| Flash Point | Above 65°C (Closed Cup) – Non-flammable in diluted form |
| Solubility | Fully miscible with water in all proportions |
| Stability | Stable under normal handling and storage conditions |
| Biodegradability | > 90% (readily biodegradable as per OECD guidelines) |
| Corrosivity | Non-corrosive to carbon steel, stainless steel, aluminum, and common alloys under use conditions |
