Your shopping cart is empty.
Product Code: RXSOL-19-3321-200
| Specification | Typical Values |
| Acid Value (mgKOH/g) | 180 - 195 |
| Saponification Value (mgKOH/g) | 186 - 201 |
| Viscosity cp (at 25℃) | 90000 - 130000 |
| Colour (Gardner) | 18 Max |
| Content of Trimer Acid (%) | 90 Min |
| Content of Dimer Acid (%) | 10 Max |
| Content of Monomer Acid (%) | 0.5 Max |
| Product Form | Liquid |
| Packaging | 25 Ltr, 210 LtrDrum; IBC |
Product Code: RXSOL-43-8109-025
Advantages of using RXSOL pH Correction Media
Product Code: RXSOL-25-1005-030
PROEDURE OF USE:-
1st Method:-
Mix 1 part of RXSOL-10-1005-025 with 2 -10 parts of water / GAS-OIL , For heavy oil,greasy surface use directly)Spray directly on the entire surface to be cleaned. This can be achieved by Hand spray / mechanical spray pump. Immediately after 2 -5 minute of spray the RXSOL-10-1005-025 starts its function. The Dirt, oil grease etc will loosen. 5 to 6 minutes after spraying start rinsing the system with water (High pressure recommended). Dirt and mud starts vanishing with cleaning media and water.
2nd Method:-
Application in immersion process with or without ultrasonic support, manual wipping.
3rd Method:-
RXSOL-10-1005-025 is also used in conjunction with alkaline degreasing bath at 3-5% (v/v) concentration for better and quick degreasing action. Eithers the bath is heated to be 70c or the solution can be stirred or air agitated.
Product Code: RXSOL-81-8206-270
| Appearance | Liquid |
| State | Viscous liquid |
| Colour | Clear to opaque |
| pH at 20oC±1°C | 6.5 - 8.5 |
| Specific Gravity at 20°C+1°C | 1.0 ± 1.05 |
| Pour point | (-) 5°C |
Advantages of Drilling Foam:
Product Code: RXSOL-23-8926-025
Safe Handling Recommendations
Utilize normal precautions for employee protection when handling chemical products. Use of appropriate respirator, gloves, goggles, and apron is recommended for employee comfort and protection. See Material Safety Data Sheet (MSDS) for this product prior to use.
Product Code: RXSOL-43-3302-025
Scale Inhibitor for Cooling Water Systems is a liquid antiscalant designed to inhibit scale in cellulose acetate and polyamide membrane separation systems. The formulation contains a 35% by weight solution of poly acid that has a tight molecular weight range of 2000.
This product is designed for use in waters that do not have a high potential for colloidal and silt fouling of RO membrane surfaces (i.e. groundwater applications).
This Scale Inhibitor by RXSOL can be injected neat or diluted and a site‐specific dosage can be determined.
Application:
Scale Inhibitor Cooling Tower's performance is achieved when the chemical is injected downstream of multimedia filters and upstream of cartridge filters. For maximum effectiveness, it should be added prior to the static mixer or cartridge filter housing. For potable the maximum dosage is 10 mg/L. Maximum dilution is 10% with RO permeate or DI water
| Parameter | Specification |
|---|---|
| Appearance | Clear to light amber liquid |
| Specific Gravity | 1.11 ± 0.02 g/cm³ |
| pH | 3.0 ± 0.5 |
| Solubility | Completely soluble in water |
| Odor | Mild |
| Freezing Point | Approx. -5°C |
It reduces the risk of scaling and eliminates the use of hazardous acids, resulting in efficient plant operation with highest possible conversion rate.
It is a very effective antiscalant. It is also compatible with RO CHEMICALS series of coagulant and flocculants (polyelectrolytes). Our RO Antiscalant (HIGH PH) is effective in minimizing scaling in presence of foulants like Calcium Carbonate, Sulfate salts of Calcium, Barium, Strontium and Magnesium, Calcium Fluoride, Iron and Silica.
Mechanism of Action of Scale Inhibitor
RXSOL Scale Inhibitor for Cooling Water Systems is the perfect easy to use liquid formulation to get rid of any scale formation in future. Its high molecular weight polymer acts as an excellent dispersant, thereby enabling easier scale inhibition and better scale cleaning.
Product Code: RXSOL-25-1048-020
Procedure-of-use: The most effective descaling is accomplished by circulation.In the case of small components,the soak method in an immersion bath can be used. If the equipment to be cleaned is contaminated by oil, grease or sludge, then pre-cleaning with DEGREASER ( RXSOL OB 1005 ) is necessary. Depending on the extent of scaling, use a solution of 2.5-10% RXSOL-54-1008-025 . The solution will have a red colour which changes to orange when 85% of the acid has been neutralized , & to colourless when the solution is totally neutralized. Whenever possible, the solution should be heated to 60°C.Neutralised solutions can be re-activated by adding more RXSOL-54-1008-025 until the red colour reappears.
Fields: Descaling of Boilers, Descaling of Diesel Engine Cooling Systems, Condenser, Pipeline collection system, Evaporators, Calorifiers, Heat Exchangers,The strength of the acid can be enhanced by adding 1part sodium chloride (common salt) to 20 parts of Descalex.If salt is not available, an acceptable alternative is to dissolve RXSOL-54-1008-025 in sea water. After use of RXSOL-54-1008-025 a 0.5% solution of Alkalinity Control in fresh water should be used for neutralization.
RXSOL-54-1048-020 should not be used on Aluminium, Zinc, Tin, or any Galvanized Surfaces for which a special grade cleaner should be used. Chemical Cleaning Module RX cleansers has developed a 280 litres capacity cleaning module, primarily designed for use with chemical acid solvents for descaling boilers, calorifiers, heat exchangers & other types of equipment where rust & scale form RXSOL-11-1008--DC Boilers, See RX cleansers Practical Application Manual
The engine room is the heart of any vessel, responsible for the propulsion and essential power systems that keep the ship running smoothly. Proper engine room maintenance is critical to ensuring safety, efficiency, and regulatory compliance. At RXMARINE International, we specialize in providing high-quality marine chemicals that enhance maintenance procedures, keeping vessels in top condition.
Prevents Downtime & Costly Repairs: Regular inspections help detect early signs of wear and tear, reducing expensive breakdowns.
Enhances Fuel Efficiency: A well-maintained engine operates efficiently, cutting down fuel consumption and operational costs.
Ensures Crew Safety: Proper maintenance minimizes the risk of hazardous incidents such as fires, leaks, or mechanical failures.
Regulatory Compliance: Compliance with international maritime regulations (IMO, SOLAS) is essential to avoid fines and ensure smooth sailing.
The accumulation of oil, grease, and dirt can lead to overheating and reduced efficiency. Using RXMARINE’s Engine Room Cleaners & Degreasers, you can effectively remove sludge, carbon deposits, and oil residues.
Regular oil changes using high-quality marine lubricants help prevent friction and wear.
Monitoring oil viscosity and contamination is crucial to detect potential engine issues early.
Scale and corrosion in heat exchangers and cooling lines reduce efficiency. Descaling chemicals like RXMARINE’s RXSCALE help prevent blockages and maintain optimal cooling.
Ensure coolant levels are checked regularly to prevent overheating.
Fuel contamination with water, sludge, and microbial growth can affect engine performance. Using fuel additives and biocides prevents clogging and improves combustion efficiency.
Regularly clean fuel injectors and filters to maintain smooth operation.
The bilge area accumulates oil and sludge, which can pose environmental and safety hazards.
RXMARINE’s Oil Spill Dispersants & Bilge Cleaners effectively break down oil and prevent pollution.
Saltwater exposure accelerates corrosion in pipes, tanks, and metal surfaces.
Apply corrosion inhibitors and protective coatings to extend the life of engine room components.
Product Code: RXSOL-12-1518-025
| Application Type | Sodium Gluconate % in Detergent |
|---|---|
| Light duty alkaline CIP | 2 – 5 % |
| Heavy duty alkaline CIP | 5 – 10 % |
| Hard water systems | Up to 12 % |
Typical CIP solution concentration:
0.5 – 2% detergent in water
Temperature: 60–80°C
Contact time: 20–40 minutes
Heavy-Duty Food Plant Cleaner
Caustic Soda (NaOH) – 25–35%
Sodium Gluconate – 5–8%
Sodium Metasilicate – 5–10%
Low-foam Surfactant – 2–4%
Water – Balance
Sodium Gluconate is white or slight yellowish crystal free flowing powder. Sodium gluconate is a compound with formula NaC6H11O7 having water soluble nature.
| Form | Powder, Finecrystalline |
| Colour | White |
| Odour | Odourless |
| Odor Threshold | Threshold Not applicable |
| pH | 7.0 - 8.0 at 100 g/l 20 °C |
| Melting Point | 170 - 175 °C |
| Boiling Point | Not Applicable |
| Flash Point | Not Applicable |
| Evaporation Rate | No information available. |
| Flammability (solid, gas) | No Data Available |
| Explosive limits | No Data Available |
| Vapour pressure | No Data Available |
| Vapour Density | No Data Available |
| Specific Gravity | 1.98 g/cm3 at 20 °C |
| Partition coefficient | No data available |
| Explosive properties | None |
| Water Solubility | 590 g/l at 25 °C |
| Auto Ignition temperature |
No information available. |
Sodium GLucoante is more usefull When
✔ High iron water
✔ Hard water conditions
✔ Dairy scale problems
✔ Heat exchanger cleaning
✔ Alkaline CIP systems
Stable in strong alkaline solutions
Compatible with chlorine at controlled levels
Works best at pH > 10
Not a strong acid scale remover (acid CIP required for heavy carbonate deposits)
Sodium Gluconate is the sodium salt of gluconic acid and is produced by fermentation of glucose. It is a white granular, crystalline solid which is very soluble in water. It is non corrosive, non toxic, biodegradable and renewable. It is resistant to oxidation and reduction even at high temperatures. The main property of sodium gluconate is its excellent chelating power, especially in alkaline and concentrated alkaline solutions. It forms stable chelates with calcium, iron, copper, aluminium and other heavy metals. It is a superior chelating agent than EDTA, NTA and phosphonates.
Product Code: RXSOL-67-6202-050
| Parameter | Value |
|---|---|
| Appearance | Clear to slightly hazy liquid |
| Color | Colorless to light yellow |
| Odor | Odorless |
| pH (10% solution) | 7.0 – 9.0 |
| Specific Gravity @ 25°C | 1.25 – 1.30 |
| Solubility | Completely soluble in water |
| Hygroscopic Nature | Highly hygroscopic |
Advantages of using RXSOL Dust Control Liquid PLUS
Product Code: RXSOL-51-1747-025
|
PHYSICAL STATE |
: LIQUID, DARK LIQUID |
| BOILING POINT |
: 105° C |
| SOLUBILITY IN WATER |
: MISCIBLE |
| SPECIFIC GRAVITY, (WATER=1) | :1.03 @ 25 DEGREE C |
| VAPOR PRESSURE |
: 20.1mmHg @ 25 DEGREE C |
| VAPOR DENSITY, (AIR=1): | : .62 @ 25 DEGREE C |
| pH |
: UNREADABLE, GENERALLY < 3 |
| EVAPORATION RATE, (WATER=1): | :SLOW |
LIME Marine does not corrode, erode, attack, oxidize or have other deleterious affects on virtually any metal or materials found in marine water systems such as: BRASS, IRON, LEATHER, CERAMIC ,WOOD, FIBER, PLASTICS FIBERGLASS, COPPER, STEEL, TITANIUM ,COPPER NICKEL ,RUBBER, GLASS, GELCOATS PAINTED SURFACES.
LIME Marine is an electrolyte, as are most cleaning agents. An electrolyte is any liquid that will transfer small electrical currents. Examples: salt water, vinegar, Coca-Cola. An electrolyte may cause plating in some types of equipment. This means a transfer of small amounts of one metal onto another metal according to the galvanic corrosion chart. In some instances, a thin coating of copper may be plated onto a steel drum while circulating an electrolyte such as RXLYME Marine. The only time plating occurs is when two dissimilar metals are in an electrolyte solution.
It is recommended, but not mandatory, that the LIME Marine solution be thoroughly mixed before using. Some settling of a dark precipitate may occur, resulting in an amber colored liquid, but has no negative affects upon the performance of the solution.
Product Code: RXSOL-15-8685-005
pH: <1.0 pH ready to use
Product Code: RXSOL-22-1011-220
