PYROGALLOL RED

Size:

Color:

Product Short Description: PYROGALLOL RED
Product Technical Specification:
C.A.S. No. 32638-88-3
M.F. C19H14O9S
M.W. 418.39gm/mole

Specifications:

Solubility 0.1% (0.1N NaOH) Clear solution
Absorption maximum (in acidic MeOH) ?max 474-478nm
Absorptivity 1%, 1cm (in acidic MeOH) at ?max >450
Loss on drying (110°C) <5%
Remarks:
Images: Alt


PYROCATECHOL VIOLET

Size:

Color:

Product Short Description: PYROCATECHOL VIOLET
Product Technical Specification:
C.A.S. No. 115-41-3
M.F. C19H14O2S
M.W. 386.38gm/mole

Specifications:

Solubility 0.1% (MeOH) Clear solution
Absorption maximum(in MeOH) ?max 442-446nm
Absorptivity 1%, 1cm (in MeOH)at ?max >360
Loss on drying (110°C) <7%
Remarks:
Images: Alt


ROSE BENGAL

Size:

Color:

Product Short Description: ROSE BENGAL
Product Technical Specification:
C.A.S. No. 632-69-9
CI NO. 45440
M.F. C20H2O5Cl4I4Na2
M.W. 1017.65gm/mole

Specifications:

Dye Content (by Spectrophotometry) >90%
Solubility 0.1% (Dist. water) Clear solution
Absorption max. (Water+2ml 5% Na2CO3) ?max 544-550nm
Absorptivity (A1%/1cm, in Water+2ml 5% Na2CO3) at ?max >910
Loss on drying (110°C) <10%
Remarks:
Images: Alt


Calcium OXIDE Powder

Size:

Color:

Product Short Description: Extra Pure for RUBBER processing.
Product Technical Specification:

CALCIUM OXIDE is an odorless, white or gray-white solid in the form of hard lumps. A strong irritant to skin, eyes and mucous membranes. Used in insecticides ...

Because of vigorous reaction of quicklime with water, quicklime causes severe irritation when inhaled or placed in contact with moist skin or eyes. Inhalation may cause coughing, sneezing, labored breathing. It may then evolve into burns with perforation of the nasal septum, abdominal pain, nausea and vomiting. Although quicklime is not considered a fire hazard, its reaction with water can release enough heat to ignite combustible materials.

Appearance White to pale yellow/brown powder
Odor Odorless
Density 3.34 g/cm3
Melting point 2,613 °C (4,735 °F; 2,886 K)
Boiling point 2,850 °C (5,160 °F; 3,120 K) (100 hPa)
Solubility in water
 Reacts to form calcium hydroxide
Solubility in Methanol Insoluble (also in diethyl ether, octanol)
Acidity (pKa) 12.8
Magnetic susceptibility (χ)
 −15.0×10−6 cm3/mol

 

Remarks:
Images: Alt


Fire Resistance Hydraulic Fluid Concentrates

Size:

Color:

Product Short Description: Waterbased hydraulic fluid specifically formulated for use in high-pressure open / vent to sea Blow Out Preventer (BOP) control systems.
Product Technical Specification:

 

Typical Physical Properties RXSOL-16-3764-210
RXSOL-16-3764-210 No Dye
Appearance Clear Dark Green Mobile Fluid Clear Amber Fluid
Specific Gravity @15.6°C 1.063 1.063
pH (neat) 10.0 10.0
pH @ 2% 9.4 9.4
Pour Point -40°C (-40°F) -40°C (-40°F)
Kinematic Viscosity (cSt)-20°C (-4°F) 740 740
0°C (32°F) 82 82
20°C (68°F) 20 20
40°C (104°F) 7 7

 

Remarks:

Water-glycol fluids results Lubrication and component life systems containing pumps with plain bearings or lightly loaded ball and roller bearings designed to operate with water glycol fluids. This is best product to reduce its maintenance costs

Suitable for demanding hydraulic applications where there is a high fire risk, such as those found in the Metal and Mining industries.

Images: Alt


Lime Powder Tech

Size:

Color:

Product Short Description: Extra Pure suitable for Coating on metal surface
Product Technical Specification:
Remarks:
Images: Alt


Vanadium Inhibitor RXSOL ORG 70

Size:

Color:

Product Short Description: Vanadium Inhibitor is specially designed for gas turbine
Product Technical Specification:

 

Type : Magnesium
Wt. % 20%
Specification Gravity : 1.21
Flash Point : 60 °C
Pour Point : 20°C
Viscisity : 100 Cst (38°C)
Compatibility with fuel: Totally Miscible
Hydrolyic Stability : Stable
Particulate Matter : 0.5% , Sediment 99.9%
Average particle : 40 - 60 nm
Capabilities : Highly Resistant to hydrolysis
Water % : Nil
 
Remarks:
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


OXYGEN CLEANER

Size:

Color:

Product Short Description: Most suitable product for oxygen cleaning and degreasing operations. Oxygen Cleaner is highly concentrated product which can be diluted with water before use.
Product Technical Specification:

PROPERTIES
NFPA Hazard Class Health 0 (as used)
Flammability 0 Reactivity 0 VOC <1 g/L (as used)
pH 12.9 (concentrate)
Flash point None 

Due to presence of cationic and non-ionic ingredients, Oxygen cleaner also effectively work with Calcium or Magnesium ions.

Remarks:

Oxygen Cleaner easily and effectively reacts with contamination, Principally oxygen cleaner reduce surface tension by which Organic materials easily dissolved and dissociate from surface. As oxygen cleaner contains cationic and non-ionic reducing agents also resulting biodegradable towards environment and Health Hazard Class of 0 

Oxygen Cleaner concentrate pH value is 12.9

Presence of Non Ionic ingredient increases the product's penetration into the dirt. It also decreases the static attraction of the dirt to the substrate by encasing the dirt particles, preventing them from attaching to the surface.
Presence of Cationic Reagent splits oils rather then emulsifying them, Due to that  Oil-based products are decomposed by using our Oxygen Cleaner. 

Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


Hydrazine Test Reagent TK - 16

Size:

Color:

Product Short Description: Reagent of Hydrazine Test Kit
Product Technical Specification:

Add 40 drop (2ml) of Reagent TK-16. Mix well

Remarks:

Before Sampling all PRECAUTION should be taken :::

Toxic effects of Hydrazine ( which is collected in sample ) is a severe skin and mucous membrane irritant in humans; in animals.In humans, the vapor is immediately irritating to the nose and throat and causes dizziness and nausea; itching, burning, and swelling of the eyes develop over a period of several hours. Severe exposures of the eyes to the vapors causes temporary blindness lasting for about 24 hours. Recurrent exposure to hydrazine hydrate has been reported to cause contact dermatitis of the hands without systemic intoxication. In humans, hydrazine is absorbed through the skin, by inhalation, and orally; systemic effects include weight loss, weakness, vomiting, excited behavior, and convulsions; the chief histologic findings are fatty degeneration of the liver and nephritis. 

Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


Hydrazine Test Reagent TK - 17

Size:

Color:

Product Short Description: Reagent of Hydrazine Test Kit powder
Product Technical Specification:

Add 2 micro spoon full of Reagent TK-17. Mix well upto provider dissolves Completely. Wait for 10 minutes.

Remarks:

Before Sampling all PRECAUTION should be taken :::

Toxic effects of Hydrazine ( which is collected in sample ) is a severe skin and mucous membrane irritant in humans; in animals.In humans, the vapor is immediately irritating to the nose and throat and causes dizziness and nausea; itching, burning, and swelling of the eyes develop over a period of several hours. Severe exposures of the eyes to the vapors causes temporary blindness lasting for about 24 hours. Recurrent exposure to hydrazine hydrate has been reported to cause contact dermatitis of the hands without systemic intoxication. In humans, hydrazine is absorbed through the skin, by inhalation, and orally; systemic effects include weight loss, weakness, vomiting, excited behavior, and convulsions; the chief histologic findings are fatty degeneration of the liver and nephritis. 

Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


Mono Ethylene Inhibited Glycol Blue

Size:

Color:

Product Short Description: It is an odorless, colorless, sweet-tasting, viscous liquid.
Product Technical Specification:

Description: Mono Ethylene Inhibited Glycol  Blue

Test Description

Specification Limits 

Min. Max. 

Unit  of Measure 

Test  Method 

Monoethylene Glycol

> 95

%(w/w)

Water

0.05

%(w/w)                                   ASTM E-203

Acidity (as acetic acid)

0.001

%(w/w)                                 ASTM D-1613
Alkalinity 10 10

Iron

0.1

ppm                                      ASTM E-202  

DEG

05

%(w/w)                                           SD-498

Aldehyde (as acetaldehyde Chloride)

10

ppm

Ash

4

3%(w/w)                                       ISI 5295

pH at 20oC

6.5

6.5
pH on dilution with 25% water 8.3 8.3

Appearance

Blue Clear

Blue Clear

Specific Gravity 20/20oC

1.1153

1.125
Freezing Point at 25% dilution -11°C -11.5 °C

UV Tansmittance wavelength %

220

70

nm

275

90

nm

350

98

nm

 
Remarks:
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


Activated Alumina Filter

Size:

Color:

Product Short Description: More effective then ORDINARY alumina. Also refer new tec grade if ur requirement to absorb poisonous gases RXSOL-24-1905-025
Product Technical Specification:

Physical Properties: ACTIVATED ALUMINA BALL Size 2-5mm Al2O3 94.6%

  1/8” (2-5mm)
Color and form  White  bead
 Bulk density  48 lbs/Ft3
 Crush strength  17-30 lbs or 82N/grain
 Surface area  1.74 x 106 sq ft/lb or 210.36m2/g
Static adsorption
 Humidity
 		 Moisture Absorption 33%           -
100% RH
90% RH
60% RH
10% RH		 42.0%
37.5%
21.0%
7.5%

SiO2 0.046%
Fe2O3 0.013%
Na2O 0.317%
L.O.I 3.88%
Porosity Volume 0.4ml/g
Remarks:
Images: Alt

HAVE A QUESTION?

Ask your questions away and let our dedicated customer service help you look through our FAQs to get your questions answered!

stock-clearance.png