Your shopping cart is empty.
Product Code: RXSOL-60-1304-500
Sulphamic Acid Based Descalants
Our high quality range of Sulfamic Acid Descalant is non hazardous & non flammable, and does not give off unbearable fumes. It’s perfect for removing scales from cooling towers, coils, heat exchangers, condensers and heating & cooling systems. Sulfamic Acid Descalant increases the efficiency of working of a plant and equipment on cooling and cleaning surfaces by removing industrial scale.
|
Structural Formula  CAS Number: 5329-14-6 IUPAC: sulfamic acid |
|
|
Melting point
|
205 Deg.C
|
|
Decomposition Temperature
|
209 Deg.C
|
|
Specific Gravity
|
2.126
|
|
Bulk Density (loose)
|
1.0 - 1.2
|
|
Bulk Density (packed)
|
1.0 - 1.6
|
|
Dissociation constant
|
0.101
|
Rapid Softening, disintegration and dissolving of scales.
By reducing down-time, productivity is increased. by protecting metal and by uniform leaning of the surface equipment life is prolonged and performance made superior. The above information is adequate for commonly encountered problems of descaling.
Handling & Storage
• No Fumes Avoid contact with skin or eyes. Wear Cup-type, rubber or soft plastic-framed goggles, protective clothing, and rubber gloves must be worn when handling.
• Keep in a tightly closed container. Protect from physical damage.
• Store in a cool, dry, ventilated area away from sources of heat, moisture and incompatibilities.
• Containers containing this material may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.
• Ensure as low exposure as possible. Local exhaust ventilation is generally preferred as it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Product Code: RXSOL-15-3008-010
Product Code: RXSOL-61-6403-001
Other Valuable product categories.
1. Personal Protective Equipment
2. ROAD/TRAFFIC Safety Product's
3. Fire Fighting Product's
4. Marine Safety Product's
5. LOTO Kits & Locks
6. Chemical Safety: Dispense Cans, Storage Cabinets, Spill Kits & Pallets
7. Medical & Lab Safety Products
8. General Safety
Product Code: RXSOL-90-4162-210
| Appearance | : | Clear Pale Straw Liquid |
| Odour | : | Glycol Ether Odour |
| pH 1% Soln. | : | 7 |
| Boiling Point | : | > 212F |
| Specific Gravity | : | 0.96 g/ml |
| Viscosity | : | 10 cps |
| Solubility in Water | : | Complete White Emulsion |
| Misc. Physical Data | : |
NA |
Product Code: RXSOL-40-4052-025
Product Code: RXSOL-11-1052-050
A high strength commercial descaling fluid to attack stubborn lime scale caking inside dishwashing machines and other stainless steel equipment within the commercial catering environment. Descaler must be diluted before use using a 30ml 5lt pelican pump.
Dishwashers/Glass washers
• Switch off the electronic wall mounted dosing equipment (if applicable).
• Dilute Descaler with up to 20 parts water depending on the degree of scale build up and add directly into the wash tank. For best results, heat water up to working temperature and circulate until all scale is removed.
• Drain solution, refill and rinse thoroughly with clean water. Drain again and refill with clean water.
Tea Urns
• Fill urn with water and add 10 plunges of Descaler via 30 ml dispensing pump fitted to 5lt container.
• Allow approximately 1 hour contact time. If necessary, agitate scale with green scouring pad to remove stubborn heavy scale deposits.
• Drain and rinse thoroughly with clean water.
Floors & Hard Surfaces
• If you live in a hard water area and your water supply is untreated, routine floor & hard surface cleaning may leave scale deposits that will periodically need to be removed.
• Dilute Descaler with up to 20 parts water and wash the floor or surface as you would under normal circumstances. Always rinse the floor or surface after descaling and clean again using the appropriate cleaning product.
N.B. The use of hot water will accelerate the effectiveness of Descaler.
Product Code: RXSOL-62-6033-001
|
Chemical Name |
Percent |
Value |
Test Method |
|
Sodium hydroxide(NaOH),min. |
% |
48-55 |
STAS3068 |
|
Sodium carbonate (Na2CO3), max |
% |
0.7 |
STAS3068 |
|
Water |
% |
45-52 |
|
Appearance: Liquid, clear to slight haze, colorless to light grey tint.
Odor: No odor
pH: 14 as is basis
Melting/Freeze point-range: -18⁰C - -12.8⁰C (0⁰F-5⁰F) approx.
Boiling point-range: 110⁰C-113⁰C (230⁰F- 236⁰F) approx.
Flash point: NA
Evaporation rate: NA
Flammability: Not flammable.
Upper/lower flammability limits: NA
Vapor pressure: NA
Vapor density: NA Relative
Water Solubility: Complete.
Partial coefficient: n-octanol/water: NA
Auto ignition: NA
Decomposition temperature: NA
Viscosity: 7-10 cps @ 20⁰C (68⁰F)
Product Code: RXSOL-16-1501-035
Product Properties:
|
Appearance |
Clear Liquid |
|
Odor |
Perfumed |
|
pH |
7.5 - 8.0 |
|
Foam |
High and stable |
|
Abrasives |
None |
|
Solubility |
Complete with water |
|
Emulsification of oil and grease |
Excellent |
|
Detergency |
Excellent |
|
Risibility |
Excellent |
|
Flash Point |
None (water based) |
|
Biodegradability |
Complete |
|
Storage/Stability/ Shelf Life |
5 Years. |
Product Code: RXSOL-16-3006-005
Product Code: RXSOL-90-9009-025
| S.N | Test | specification | Result |
| 1 | Appearance | white to Pale | complies |
| 2 | % Diamine | >90 | 91.1 |
| 3 | % Moisture | 1% max | 0.79 |
| 4 | Total Amine VALUE | 320-345 | 329 |
| 5 | Iodine Value | 32-55 |
34.2 |
Product Code: RXSOL-32-3101-050
|
Form |
: Solid |
|
Color |
: Blue |
|
Odor |
: Odorless |
|
Odour threshold |
: Not determined. |
|
pH-value |
: Not applicable. |
|
Melting point/Melting range |
: undetermined |
|
Boiling point/Boiling range |
: undetermined |
|
Flash point |
: Not applicable |
|
Flammability (solid, gaseous) |
: Not determined. |
|
Decomposition temperature |
: Not determined |
|
Auto igniting |
: Product is not selfigniting. |
|
Danger of explosion |
: Product does not present an explosion hazard |
|
Explosion limits Lower |
: Not determined |
|
Explosion limits Upper |
: Not determined. |
|
Vapor pressure |
: Not applicable. |
|
Form |
: Solid |
|
Color |
: Blue |
|
Odor |
: Odorless |
|
Odour threshold |
: Not determined. |
|
pH-value |
: Not applicable. |
|
Melting point/Melting range |
: undetermined |
|
Boiling point/Boiling range |
: undetermined |
|
Flash point |
: Not applicable |
|
Flammability (solid, gaseous) |
: Not determined. |
|
Decomposition temperature |
: Not determined |
|
Auto igniting |
: Product is not selfigniting. |
|
Danger of explosion |
: Product does not present an explosion hazard |
|
Explosion limits Lower |
: Not determined |
|
Explosion limits Upper |
: Not determined. |
|
Vapor pressure |
: Not applicable. |
Product Code: RXSOL-13-1096-210
PRODUCT PROPERTIES :
| APPEARANCE | Clear Yellowish liquid | |
| DENSITY | g/cm3 at 15°C: 1.2 | |
| pH | 10% solution 1.5-2.5 | |
| COMPATIBILITY | ||
| METAL | Concentrate and long touch may corrode. | |
| RUBBER | No known effect | |
| PACKAGING | Order No. RXSOL-13-1096-025 | Size (in litres) 25 , 35 , 210 |
