Products Grid | Page 365 | Marine Chemicals,Tank Cleaning Chemicals,Water Chemicals Products,Cooling Water Treatment Chemicals

Product Short Description: SILICA GEL WHITE

Product Technical Specification:

SPECIFICATION FOR SILICA GEL INDICATING (BLUE) / NON INDICATING (WHITE):

Loss on drying :	Not more that 5% mass
Absorption Capacity :	27% min on the basis of mass
PH :	3.5 to 8.
Chlorides :	0.05% by mass max
Cobalt (as CoCl2) :	0.4 by mass max
Ammonium compounds (as NaH3):	0.5% by mass max
Sulphates (Na2SO4) :	0.5% by mass max
Packing:	25 / 50 kgs M S drum (Smaller packing available).

Remarks:

Images:

Get MSDS

Get Technical Bulletin

Connect On Whats App

Steel Test Reagent For 304/316 Molybdenum Test

Product Short Description: Steel Test Reagent for differentiating generaSteel and grade of 304 / 316, Hastelloy

Product Technical Specification:

Steel Test Reagent For 304/316 Molybdenum Test kit manufacturer and supplier.

Remarks:

IMPORTANT : After use replace the cap on the bottle. Rinse thoroughly the tested surface. Contains 9% of hydrochloric acid.

Strictly Avoid Contact with SKIN , EYE and any part of BODY.

Images:

Get MSDS

Get Technical Bulletin

Connect On Whats App

Cement Remover Gel RX Hold

Product Short Description: Highly concentrated and powerful penetrating agents materials which is effectively react with cement to loosen the bonding strength . Best results can obtain on dry surface of cement. RXSOL'S R & D has developed this molecular cement dissolver as an alt

Product Technical Specification:

It is highly concentrated and powerful penetrating agents materials which is effectively react with cement to loosen the bonding strength . Best results can obtain on dry surface of cement. RXSOL'S R & D has developed this molecular cement dissolver as an alternative to using hazardous acids for concrete removal. Back-Set is a one-of-a-kind formula.

RXSOL-22-2202-035 turned this vulnerability into an opportunity. "Back-Set" safely removes hardened concrete from a variety of difficult to clean surfaces. It break down the ionic bond in portland cement, releasing the cement from any surface to which it has adhered.

This liquid mixture specifically designed to deal with hard cases of cement cargo deposits or dry cement stains. Its proven advantage is the provision of immediate penetration and complete dissolution of cement, the result being a thorough cleaning.

Chemically Back-Set converts the positive ions in the hardened matrix into negative ions, which dissolves the cement into mud that can be rinsed away. Because it works chemically, rather than mechanically, Back-Set may be used to remove cured concrete, mortar, grout, and stucco from virtually any surface without harm.

Remarks:

1. Apply cement remover on cement, to loosen the bond between the cement and the surface.
2. Give Sufficient time of reaction will loose bond of cement completely.
3. Repeat the 1st step on the cement for at least an hour or two.
4. For hot climate avoid evaporation, reapply frequently to keep the area moist.
5. After the cement starts to loosen, scrub the area with either a brush, Scotch Brite pad or scouring pad.
6. If a small amount remains, reapply Cement dissolver chemical and allow it to set again.
7. Scrub again until all of the cement is removed.
8. Flush the area with water.
9. Neutralise and Wash the area with alkaline soap and water.

Images:

Get MSDS

Get Technical Bulletin

Connect On Whats App

Sodium Lauryl Ether Sulfate 28%

Product Short Description: Excellent Foaming power and detergency properties. It can be used with other anionic, non-ionic or amphoteric surfactants

Product Technical Specification:

TECHNICAL SPECIFICATIONS :

Appearance/nature	: Viscous Flowable Liquid
Colour	: Colourless to pale yellow
on APHA (20% aqueous solution), maximum	: Characteristic
Odour	: 500-234-8
pH (1 % aqueous solution)	: 6.8-8.5
Active Matter, % by mass minimum	: 68
Molecular Weight	: 384
Sulfate, % by mass as Na2SO4, maximum	: 1.5
N.D.O.M.,% by mass(on 100% A.M.basis), max	: 3.0
1, 4 - Dioxane (on 100% A.M. basis), ppm, max	: 30
Iron content as Fe, ppm, maximum	: 5
Heavy metals as Pb, ppm, maximum	: 15
Microbial count, TVC, cfu/ml	: < 10

Certificate of Analysis according to DIN 55350-18-4.2.2

Sr.No	Characteristic / Method	Unit	Value	Lower Limit	Upper Limit
1.	Appearance @25 °C 93000601		Confirms	Transparent to yellowish Flowable Paste
2.	Odour 93000701		Confirms	Conform to STD
3.	Active Ingredient (M.W.384) ISO 2271	%	69.2	69.00	70.00
4.	pH 3% Solution ISO 4316		7.2	7.00	9.00
5.	Sodium Sulfate Method No. 920015-01	%	0.3		1.00
6.	Unsulfated Matter Method No. 970064-02	%	2.4		2.80
7.	Dioxane (as is) Method No 920021-01	ppm	21		30
8.	Colour APHA (20% Sol. @25 °C) ISO 6271		16		25
	Packing / Production Date
	Expiry Date / Shelf Life

Remarks:

Images:

Demulsifier ORG

Product Short Description: Power of Chemical to break EMULSION in two phase hydrocarbon phase (oil) and a water-phase. Dosage and application will vary based on emulsion characteristics. For most crude or fuel oil based emulsions, a starting concentration of 0.1% at 165°F with a minimum heated recirculation contact time of 2

Product Technical Specification:

SPECIFICATIONS:

Color:	Opaque white to yellow
Odor:	Sweet to Mild chemical odor Specific Gravity: 0.98 @25°C
Flash Point:	200°F
pH (10%):	5.63
Solubility:	Water Dispersible

Remarks:

Images:

Ultra Clean Industrial

Product Short Description: Liquid cleaner for ferrous and Non ferrous materials. This product also have extra chemical rust protection.

Product Technical Specification:

Appearance/Physical State:	Clear Liquid
Vapor Pressure:	N/D
Boiling Point:	212°F
Density:	8.8 lbs. /gal.
Solubility in Water:	Soluble
Odor:	Citrus scent
Vapor Density:	N/D
Freezing Point:	N/D
Concentrate pH:	12.4 - 12.8
RTU pH:	10.7 - 11.3

Remarks:

Images:

Ultrasonic Bath Universal Cleaner

Product Short Description: For cleaning and degreasing of machines and their components, tools, equipment and parts in industry, handicraft and laboratories

Product Technical Specification:

Remarks:

Wide Range of Ultrasonic Cleaning Solutions from RXSOL

Ultrasonic cleaning solutions can be essential when using an ultrasonic cleaner to achieve your desired results. RXSOL stocks a range of solutions which will cater for a wide range cleaning needs. Following are the cleaning solutions provided by us.

RXSOL-16-3006-025: It removes oil, removes rust and conditions the surface favorable to the adhesion of paint. It does all these three functions simultaneously. It can be used very effectively on all metals, non-metals, alloys, castings, polymers, plastics, rubber parts, polyester screens nylons, including various components, parts and assemblies of the Textile, Engineering and Automobile Industry. It is a versatile general purpose cleaner. It is very safe to use on all metals& Non-metals.

RXSOL-16-3006-210: It is an alkaline liquid chemical consisting of surfactants, dispersants and corrosion inhibitors. It is widely used for removal of soils, oils, cutting fluids, stamping, buffing and drawing compounds from ferrous as well as non-ferrous metal surfaces. RXSOL-210 is easily soluble in water at all proportions and is very safe to use as it does not contain any chlorinated solvents, phenols, chromate, nitrites or cresols.

RXSOL-16-3006-025: It is versatile solution used for MS and SS. It is very useful in preventing rusting of components after cleaning. Where there is a carbon compound, It is not advisable.

RXSOL-16-3006-210: It is versatile, highly alkaline and water solvable solution used mainly for Mild Steel and Stainless Steel. It is specially used for removing the carbon, oil etc. using dipping method.

RXSOL-16-3006-025: It is versatile solution specially used for Brass and copper.

RXSOL-16-3006-025: It is a versatile, neutral concentrated chemical cleaner ever offered for diverse types of industrial and marine cleaning. To be used diluted upto 5 parts with water according to the amount of soil to be removed.

RXSOL-16-3006-025: It is an aqueous inhibited acidic mixture, soluble in varying proportions with water. It is a very effective degreaser cum deruster for iron & steel surfaces at room temperature. It has very good penetrating power to disintegrate and dissolve, machine oils, light greases, lubricants as well as rust or scales; either by dipping process or by swabbing.

Images:

Laundry Detergent

Product Short Description: Formulated to cut greasy stains in a wide range of conditions including hard water. And Soft and mild on the hands.

Product Technical Specification:

Appearance	Pale yellow liquid
Density	In g/cm3 at 15°C: 1.01-1.10
Compatibility Metal	No known effect
Rubber	No known effect
pH	6.5-8.5
PACKAGING	RXSOL-16-1501-210	Size (in Litres) 210

Appearance	Pale yellow liquid
Density	In g/cm3 at 15°C: 1.01-1.10
Compatibility Metal	No known effect
Rubber	No known effect
pH	6.5-8.5

Appearance	Pale yellow liquid
Density	In g/cm3 at 15°C: 1.01-1.10
Compatibility Metal	No known effect
Rubber	No known effect
pH	6.5-8.5
PACKAGING	RXSOL-16-1501-210	Size (in Litres) 210

Appearance	Pale yellow liquid
Density	In g/cm3 at 15°C: 1.01-1.10
Compatibility Metal	No known effect
Rubber	No known effect
pH	6.5-8.5
PACKAGING	RXSOL-16-1501-210	Size (in Litres) 210

Appearance	Pale yellow liquid
Density	In g/cm3 at 15°C: 1.01-1.10
Compatibility Metal	No known effect
Rubber	No known effect
pH	6.5-8.5
PACKAGING	RXSOL-16-1501-210	Size (in Litres) 210

Remarks:

Images:

Boric Acid LR

Product Short Description: Boric Acid LR grade pure materials, Boric Acid classified as weak acid.

Product Technical Specification:

Product Number:	B0394
CAS Number:	10043-35-3
MDL:	MFCD00011337
Formula:	H3BO3
Formula Weight:	61.83 g/mol

Test	Specifications
Appearance (Color)	White to Off-White
Appearance (Form)	Powder
Chloride (Cl)	<0.001 %
Phosphate (PO4)	< 0.001 %
Sulfate (SO4)	< 0.01 %
Calcium (Ca)	< 0.005 %
Heavy Metals (as Lead)	< 0.001 %
Iron (Fe)	< 0.001 %
Recommended Retest Period 2 years
Note ACS tests
Assay	>_ 99.5 %
Insoluble in Methanol	<_ 0.005 %
Nonvolatile with Methanol	<_ 0.05 %

Remarks:

Boric Acid is a weakly acidic hydrate of boric oxide with mild antiseptic, antifungal, and antiviral properties. The primary industrial use of boric acid is in the manufacture of monofilament fiberglass usually referred to as textile fiberglass which is used to reinforce plastics in various applications. Boric acid in equilibrium with its conjugate base the borate ion is widely used as a primary or adjunct pH buffer system in swimming pools.

Industrial Application

1.) Adsorbents and absorbents

2.) Agricultural chemicals (non-pesticidal)

3.) Corrosion inhibitors and anti-scaling agents

4.) Fillers and Finishing agents

6.) Flame retardants

7.) Fuels and fuel additives

8.) Lubricants and lubricant additives

9.) Oxidizing/reducing agents

10.) Plating agents and surface treating agents

Images:

Search form

SILICA GEL WHITE

Steel Test Reagent For 304/316 Molybdenum Test

Cement Remover Gel RX Hold

Sodium Lauryl Ether Sulfate 28%

Demulsifier ORG

Ultra Clean Industrial

ULTRASONIC RINSE AND DRY C11

Ultrasonic Bath Universal Cleaner

Wide Range of Ultrasonic Cleaning Solutions from RXSOL

Shower Opener Gel ( SOG )

PVC Chemical Resistance Boot

Laundry Detergent

Boric Acid LR

HAVE A QUESTION?

Ask a question - WebForm Inline

LiveChat