Your shopping cart is empty.
SPECIFICATION
| Appearance | Clear, Water white liquid |
| Total soluble Al 2O3 | 10-11% |
| Basicity | 50% - 60 % |
| Chloride | 10% +/- 0.5% |
| Insoluble suspended matter | 0.01% max. |
| Iron | 50 mg/kg max. |
| pH | 3.5-5.0 |
| Specific gravity | 1.18 at 20oC |
HEAVY METAL ANALYSIS
| Arsenic | 0.5 mg/kg max. |
| Cadmium | 0.1 mg/kg max |
| Chromium | 0.5 mg/kg max. |
| Lead | 0.5 mg/kg max. |
| Mercury | 0.1 mg/kg max |
| Selenium | 0.5 mg/kg max. |
| Silver | 0.5 mg/kg max. |
| Barium | 0.5 mg/kg max. |
| Nickel | 1.0 mg.kg max. |
We Deals in Best quality Poly Aluminium Chloride Powder / Liquid - PAC, we are the perfect destination / solution for you. We have both Liquid Poly Aluminium Chloride as well as Powder Poly Aluminium Chloride. These Poly Aluminium Chlorides are used as raw materials in various industrial and engineering applications. In addition to this, we are one of the prime Polyaluminum Chloride Exporters in India.
| pH (as is) | 11.5 |
| Density (20°C) | 1.135 g/cc |
| Colour | Clear |
| Fragrance | Odourless |
| Characteristic | Corrosive, Poison |
| Biodegradability | Complete |
| Flash Point | More than 95°C |
| Freezing Stability | Keep out from freezing |
| Degradability determined in accordance with OECD no. 301D. |
FOOD ESTABLISHMENTS: Equipment and surfaces subjected to direct contact with food must be thoroughly rinsed with potable water after being cleaned with this product. Avoid contamination of food, when using this product. Do not store in food-processing or food-storage areas.
Acetic acid is an organic compound with the formula CH3COOH. It is a carboxylic acid consisting of a methyl group that is attached to a carboxyl functional group. The systematic IUPAC name of acetic acid is ethanoic acid. It is also present in vinegar in diluted form. The pungent smell and the sour taste is characteristic of the acetic acid present in it.
An undiluted solution of acetic acid is commonly referred to as glacial acetic acid.It has a wide range of applications as a polar, protic solvent. In the field of analytical chemistry, glacial acetic acid is widely used in order to estimate substances that are weakly alkaline.
|
Appearance |
Clear Blue Liquid |
|
Specific Gravity at 20ºC |
1.048 |
|
Refractive Index at 15ºC |
1.391 |
|
Freezing Protection |
-32 |
Other names:Sodium hyposulfite ,Hyposulphite of soda
Identifiers CAS number : 7772-98-7 Y, 10102-17-7 : (pentahydrate)
UNII :L0IYT1O31N Y
ChEMBL CHEMBL : 1201157 N
RTECS number :XN6476000
|
Molecular Formula |
Na2S2O3 |
|
Molar Mass |
158.11 g/mol |
|
Appearance |
white crystals |
|
Odor |
odorless |
|
Density |
1.667 g/cm3 |
|
Melting Point |
48.3 °C (pentahydrate) |
|
Boiling Point |
100 °C (pentahydrate, - 5H2O decomp) |
|
Solubility in Water |
76.4 g/100 g H20(20 °C) |
IUPAC name :Sodium thiosulfate
Other names:Sodium hyposulfite ,Hyposulphite of soda
Identifiers
CAS number : 7772-98-7 Y,
10102-17-7 : (pentahydrate)
PubChem: 24477
ChemSpider :22885 Y
UNII :L0IYT1O31N Y
ChEMBL CHEMBL : 1201157 N
RTECS number :XN6476000
Sodium Thiosulfate solutions are almost exclusively used to standardize Iodine solutions or as back-titrants in titrations using Iodine. Solutions of Sodium Thiosulfate are most commonly standardized with Potassium Dichromate or Potassium Iodate solutions, which generate Iodine from Iodide. Starch indicator is typically used. The reaction with Iodine is:
Titrations with standard Sodium Thiosulfate solution are best conducted in the pH 5 - 9 range. Since this is not always possible, the titrations should be conducted rapidly and with adequate stirring to insure rapid reaction of the Thiosulfate, thus minimizing any acid-accelerated decomposition. This will also minimize the acid-catalyzed oxidation of Iodide (usually present in a titration involving Thiosulfate) to Iodate, which could lead to decreased accuracy.
Sodium Thiosulfate solutions are subject to bacterial decomposition and chemical deterioration. Sodium Thiosulfate solutions decompose in acid solution resulting in the evolution of Sulfur Dioxide gas and precipitation of elemental Sulfur. Contact with Carbon Dioxide in the air can produce the acidity leading to this decomposition, which is faster in more dilute Thiosulfate solutions.
We have copper slag in six grades from Turbo+ to HD+ with different particle size. The user has the option to choose the appropriate grade based on the cleanliness level (SA2, 2½ & 3) and anchor profile (40-120 microns) requirements.
Copper slag is most commonly used as blasting agent in heavy industries, shipyards, oil & gas companies, paint manufacturers, coating contractors, tank builders, pressure vessel fabricators, off shore yards, construction chemical manufacturers and all major industries.
Copper Slag uses:
In addition to abrasives, copper slag is also used for making abrasive tools, roofing granules, cutting tools, tiles, glass, road-base construction, railroad ballast, asphalt pavements & in the cement and concrete industries. Copper slag partially replaces aggregates in concrete, currently, more than 75% volume of concrete contains aggregates. The use of copper slag in cement and concrete provides potential environmental as well as economic benefits for all related industries.
