Your shopping cart is empty.
| Physical State | Powder, solid, Liquid, Granules, Crystals |
| Usage | RO MEMBRANE claning chemicals Industrial, Commerical |
| Packaging Type | JAR |
| Grade Standard | Technical Grade |
| Packaging Size | 10 kg / 20 Kg |
pH adjusted to 3.0+ 0.5
Highly effective at ambient temperatures
Contains no surfactants and is quickly rinsed away
ORG Clean MC 103 Membrane Cleaner is balanced acidic low pH powder / crystal product specialize to remove metal hydroxides, calcium carbonate and other similar scales from polyamide, polysulfone and thin film, composite membrane surfaces.
ORG Clean MC 103 Membrane Cleaner is advanced, high strength powder to clean Membrane from fouling.
| Appearance : | clear, light green liquid |
| pH : | 3.5 |
| Density (kg/m3) : | 1030 |
| Solubility : | completely miscible in water |
| Flash Point : | none |
These data are to be seen as typical values and should not be considered as specifications.
Biosperse biocide for control of bacteria, fungi and algae in industrial water systems such as recirculating water systems, pasteurizers, air washer systems, membrane separation systems, coatings, emulsion polymers and adhesives. Biosperse 250 provides long lasting killing effects and is recommended in systems with a pH between 6-9,5. Biosperse 250 is easily detoxified so it can be applied even in environmentally sensitive areas.
Features
Is a broad-spectrum biocide, which very effectively controls spore and non-spore forming bacteria, SRB’s, Fe-bacteria, algae and fungi. Provides a long lasting killing effect, which enables less frequent biocide additions.
| Appearance : | clear, light green liquid |
| pH : | 3.5 |
| Density (kg/m3) : | 1030 |
| Solubility : | completely miscible in water |
| Flash Point : | none |
These data are to be seen as typical values and should not be considered as specifications.
Feeding
The quantity of Biosperse required for any given application will depend on such factors as the type and volume of the system, the extent of microbiological contamination and the degree of control required. Biosperse 250 may be fed directly from the drum or diluted with water and fed by any suitable chemical feed system. Biosperse should be dosed directly into the sump or basin or any location where good distribution can be assured.
Handling Precautions
Wear suitable protective gloves and safety goggles. In case of contact immediately flush with water. After eye contact seek medical advice. If swallowed, drink large quantities of milk, egg whites or a gelatine solution. If these are not available, drink large quantities of water. Do not induce vomiting. Seek medical advice immediately. Small spills can be flushed with water. Large spills should be collected for disposal. Use Biosperse safely. Always read label and product information (M.S.D.S.) before use.
Packaging
This product is available in a variety of packaging sizes.
Important Information
Typical Properties: Refer to the Material Safety Data Sheet (MSDS).
Regulatory Information
Refer to the MSDS or contact your sales representative for any additional regulatory and environmental information.
Safety
Use the health and safety information contained in the MSDS to develop appropriate product handling procedures to protect your employees and customers.
It is very Powerful Aluminium Cleaner
| Appearence | liquid |
| Colour | light red |
| Odour | mild |
| Melting point: | not applicable |
| Flash point | not applicable |
| Spontaneous ignition | not applicable, no Danger of explosion |
This product is avilable with all our associated ship chandlers of INDIA and Middle East by product code no RXSOL-16-1028-025.
we are manufactrer of RXSOL-16-1028-025 , and supplier in kakinada, Visakhapatnam, Vizag, Mumbai, Goa, Surat, Gandhidham, Kandla, Mundra, Chennai, Ennore, Kolkata, Haldia, Pirpav, Fujairah, Dubai, Sharjah, Abu Dhabi and Gulf.
RXSOL brand Aluminium Cleaner exporter for TURKEY, Australia.
Do not allow concentrate to come in contact with skin. Avoid contact Eyes and clothing. Alu Brightener is a concentrated liquid acid formulated .
First Aid: Skin Contact: Wash area with soap and water. Rinse with a solution of vinegar and water. If irritation persists seek medical attention
Eye Contact: Flush with water for 15 minutes. Obtain medical attention
Ingestion: Drink several glasses of fruit juice. Do not induce vomiting. Obtain immediate medical attention.
CHARACTERISTICS:
Heavy foaming action.
Solvent-Acid blend (pH: <2.0).
Removes oxidation - Brightens aluminum.
Bright pink liquid.
APPLICATION METHODS:
Low pressure, acid resistant tank sprayers are recommended.
Regardless of application method, avoid inhalation of mist or contact of liquid or mist with skin.
SUGGESTED INSTRUCTIONS FOR USE:
TYPICAL PHYSICAL PROPERTIES
| Color : |
Light Brown |
| Specific gravity (25°C) : | 1.01 |
| Flash Point : | Not applicable |
Where used:
In wall units remote cooling ceiling units. Refrigeration chiller coils or any chiller and cooler units of airconditioning systems.
SAFETY AND HANDLING
| HANDLING | Handle with care. Store in dry, cool and well ventilated environment |
| SAFETY | IMMEDIATE ACTIONS |
| Eye Contact | Avoid Eye Contact. Otherwise, flush with plenty of water for a few minutes. Seek medical attention. |
| Skin Contact | Avoid Skin contact. Otherwise, wash contaminated area thoroughly with water. Seek medical attention. |
| Inhalation | Do not breathe gas/vapors. Otherwise, seek fresh air source at once.Seek medical attention. In case of insufficient ventilation, wear suitable respiratory equipment.. |
| If Swallowed | Avoid ingestion. Otherwise, consume considerable quantity of water.Do not induce vomiting. Seek medical attention. |
| General instructions | Avoid spillage, splashing and mishandling. Precautionary measures for body protection are strongly recommended before use. |
Technical Specifcation / Typical Properties
| Form | Solid |
| Colour | Black |
| Particle Shape | Amorphous |
| Carbon Content, % | 97.0 |
| Average Particle Size, | 0.005 µ |
| Specific Surface Area (m²/g) | 44.00 |
| Oil Absorption, (g/100g) | 134 |
| +325 Mesh Retention, % | 0.004 |
| pH | 9 |
| Water Soluble Salts, % | 0.20 |
|
H2O |
0.50 |
| Ash% | 0.60% |
| Toulene Discoloration Transmission, % | 80.00 |
| Specific Gravity | 1.79 |
| Physical State | Liquid |
| Appearance | yellow |
| Odor | odorless |
| pH | 8.6-9.8 (5% soln) |
| Vapor Pressure | 0 |
| Vapor Density | Not applicable |
| Evaporation Rate | Not applicable |
| Viscosity | Not applicable |
| Boiling Point | Not available |
| Freezing/Melting Point | 975 deg C |
| Autoignition Temperature | None reported |
| Flash Point | Not available |
| Decomposition Temperature | Not available |
| NFPA Rating |
(estimated) Health: 2; Flammability: 0; Reactivity: 0 |
| Explosion Limits, Lower | None reported |
| Upper | None reported |
| Solubility | Soluble |
| Specific Gravity/Density | 2.7320 |
| Molecular Formula | K2CrO4 |
| Molecular Weight | 194.20 |
Typical Characteristics
| pH |
Reserve Alkalinity mL |
Boiling Point (undiluted) 0C |
Freezing Point |
Density @ 200C kg/L |
| 7.9 | 5.8 | 120 | -37 | 1.05 - 1.09 |
