Products Grid | Page 484 | Marine Chemicals,Tank Cleaning Chemicals,Water Chemicals Products,Cooling Water Treatment Chemicals

Product Short Description: Well-balanced blend of several powder with antifoaming agent for boiler water treatment, resulting in a scale and corrosion control by one simple operation. It is applied to types of boiler water systems, providing excess protection from the hard, sludge concentration and corrosion.

Product Technical Specification:

Function Mechanism: -

Alkalinity Control	This components of RXSOL-50-5004-020 chemically precipitate the hardness of salts like Calcium & Magnesium & neutralizes the acidic conditions.
Hardness Control	RXSOL-50-5004-020 provides phosphate reserve to effectively react with and precipitate the hardness salts introduces with the feed water.
Sludge Conditioner	RXSOL-50-5004-020 component will preventing the sludge from adhering to metals surfaces. Boiler sludge can only be removed by blow down.
Oxygen Scavangers	Catalyzed of RXSOL-50-5004-020 controls the formation of oxygen to protects boiler & steam line corrosion protection. As an additional benefits it will assist to neutralize dissolved carbon dioxide. In this way RXSOL-50-5004-020 preventing oxygen “Pitting” corrosion.

Remarks:

RXSOL-50-5004-020 is dependent on boiler operating condition, Feed 200 gm to 1 Kg of RXSOL-50-5004-020 solution for per thousand Ltr of boilers water Then control the system by Periodic Alkalinity test procedure. FREE LOGSHEET is available for our registered member. ( Maintaining of Logsheet allow to observing and evaluating the test results trend in order to use the exact amount needed for the stabilization of the system
If p-Alkalinity is below 200 ppm increase the ratio of RXSOL-50-5004-020 solution. If p-Alkalinity is above 400 ppm reduce the concentration of RXSOL-50-5004-020 solution by dilution with water.

RXSOL ALKALINITY, PHOSPHTE and SULFITE TEST KITS are available on request.

USES PROCEDURE : Always dissolve powder before feeding in BOILER WATER TANK.

Control Procedure:-

Control is by simple boiler water tests or RX CLEANSERS can provide a suitable test kits for this purpose

Images:

Get MSDS

Get Technical Bulletin

Connect On Whats App

Sludge Conditoner for Boiler Water 20 Ltr

Product Short Description: Product to be used in situations where the boiler water is contaminated with oil. This high performance product is applicable to both medium and low-pressure steam boilers in order to prevent sludge deposits.

Product Technical Specification:

PHYSICAL PROPERTIES BOILER SLUDGE CONDITIONER is a white high molecular weight solution. It is hydrophilic and of low causticity.
Appearance / Color : White, viscous liquid
Specific gravity : 0.85/15°C
pH : 8 Odor : Odorless

Remarks:

Images:

Get MSDS

Get Technical Bulletin

Connect On Whats App

FORMIC ACID

Product Short Description: Formic acid use as a preservative, antibacterial agent, cleaning agent and coagulant in rubber industries.

Product Technical Specification:

PRODUCT NAME	:	FORMICACID
CAS number	:	64-18-6
UN number	:	1779
Formula	:	HCOOH
Odour	:	PENETRATING
Solubility in water	:	COMPLETE
Density	:	1.22 at 20 oC
Boiling point	:	101oC
Melting point	:	8 oC
Viscosity	:	1.80 cp at 20oC
Flashpoint	:	42oC
Explosive limits	:	10 – 45.5 Vol%
Vapour pressure	:	42 mbar at 20oC
Skin absorption/irritation	:	YES
TLV Country NL Year 1995	:	5 ppm 9 mg/m3
Pollution category 1994	:	D

Remarks:

Images:

Get MSDS

Get Technical Bulletin

Connect On Whats App

DI OCTYLPHTHALATE

Product Short Description: Dioctyl Phthalate DOP is a colourless clear liquid.

Product Technical Specification:

PRODUCT NAME	:	DIOCTYLPHTHALATE
CAS number	:	117-81-7
UN number	:
Formula	:	C6H4(COOC8H17)2
Odour	:	MILD
Solubility in water	:	INSOLUBLE
Density	:	0.986 at 20 oC
Boiling point	:	386 oC
Melting point	:	-55oC
Viscosity	:
Flashpoint	:	199oC
Explosive limits	:	0.3 – 2.4 Vol%
Vapour pressure	:	-10 mbarat 20oC
Skin absorption/irritation	:	YES
TLV Country NL Year 1995	:	ppm 5 mg/m3
Pollution category	:	III

Remarks:

RXSOL provide wide range of Chemicals such as Detergent Chemical, Agricultural Chemical, Industrial Chemical, Plastic Chemical and many more. We are serving in the industry from a long time period and offering our qualitative product to our renowned customers with the view to satisfying their need by the extreme quality product. They are highly appreciated in the market best of using best quality raw material while manufacturing.

Images:

Ammonium Bisulfite

Product Short Description: Ammonium Bisulfite corrosion inhibitor acts as oxygen scavengers used to effectively remove dissolved OXYGEN

Product Technical Specification:

PHYSICAL AND CHEMICAL PROPERTIES

Formula	(NH4HSO3)
Molecular Weight	99
Physical appearance	Clear, Yellow coloured solution free From foreign particles.
Ammonium Bisulphite NH4HSO3 percentage by mass	65 % Min.
Specific Gravity	1.37 TO 1.39
pH	4 - 5
Description	Yellow coloured liquid having strong smell of Sulphur Dioxide.
Standard Packing	250 Kgs. HDPE Drum 1000 Liters Intermediate Bulk container (IBC) Special packaging requirements can be accommodated.

HANDLING, STORAGE AND PRECAUTIONS :

RXSOL-40-5023-210 is mildly alkaline in nature. Normal precautions should

Remarks:

The most common oxygen scavengers in oilfield production are sodium bisulfite (SBS) and ammonium bisulfite (ABS). Ammonium bisulfite is more water soluble than sodium bisulfite and typically react with oxygen faster. However, ammonium in the ammonium bisulfite can promote bacteria growth.

Being a salt of a weak acid and a strong base, sodium bisulfite forms a significantly basic aqueous solution whereas ammonium bisulfite is only slightly basic at around pH 8. As a rule of thumb, 60ppm of 65wt% ammonium bisulfite is required to reduce the oxygen concentration in water from 9ppm to 50ppb.

The reaction of bisulfite with oxygen is typically faster at higher temperatures and can be facilitated by transition metal ion catalysts, e.g. Cobalt.

The most common applications of oxygen scavenger in oil and gas production are for seawater injection facilities, hydro-testing, and acid stimulation

It is used to arrest oxygen in sea water

It removes Entrapped Oxygen and thus reduces Corrosion

In Oil Drilling Chemicals

Images:

ETHYL ACETATE

Product Short Description: Colourless solvent has a characteristic sweet / fruity smell. Used as a solvent in inks and paints and also as an extraction solvent. Its main function is to dissolve the resin, control the viscosity and modify the drying rate.

Product Technical Specification:

ETHYL ACETATE
Test	Results
Appearance	Clear colourless liquid with sweet odour
% Purity by weight	99.00%
% Moisture by weight	0.05%
% Free acidity by weight	0.04%
Specific Gravity at 20°C / 27°C	0.895
Distillation Range - Initial Boiling point	75.5°C
Distillation Range - Dry point	78°C

PRODUCT NAME	:	ETHYLACETATE
CAS number	:	141-78-6
UN number	:	1173
Formula	:	CH3COOC2H5
Odour	:	FRAGRANT
Solubility in water	:	SLIGHT
Density	:	0.895 at 25 oC
Boiling point	:	77 oC
Melting point	:	-84 oC
Viscosity	:	0.473 cp at 15 oC
Flashpoint	:	-4 oC
Explosive limits	:	2.2 – 11.5 Vol%
Vapour pressure	:	97 mbar at 20 oC
Skin absorption/irritation	:	YES
TLV Country NL Year 1995	:	150 ppm 500 mg/m3
Pollution category 1994	:	D

Remarks:

Images:

Descale Powder

Product Short Description: Scale remover and cleaner acid inhibited powder formulated to remove Rust and Scale deposits from boilers, diesel engine cooling water systems, condensers, evaporators, calorifiers and heat exchangers.

Product Technical Specification:

Appearance	Yellowish powder
Density	in g/cm3 at 15°C: 1.2
Flash Point	(PMCC) in °C: N/A
pH	in 10 wt-%: 1.1
Compatibility
Metal	Avoid aluminium, zinc, tin and their alloys and galvanised surfaces.
Rubber	No known effect.

Remarks:

RXSOL DESCALE POWDER is chemical compound and should be handle with all chemicals handling precaution like use chemical protective goggle, Hand gloves etc... For more details pl. refer RXSOL product MSDS.

Images:

Corrosion Inhibitor for Diesel Cooling Water Treat

Product Short Description: Anti-Scalant for use in closed cooling water systems , for preventing corrosion and scale Formation in Internal combustion engines, compressor cooling system, DG -set at high or low temperature. It is a concentrated liquid , also used as a corrosion inhib

Product Technical Specification:

SPECIFICATION / HANDLING
Color                           : Odour Pink/ red (Colour changes of the product cannot be excluded the effects will however not impaired.)
Sp. Gravity                  : 1.1 to 1.25
pH : Alkaline (11.3 – 11.5)
None. Rxsol-2000 is an alkaline product & should be handled like other chemical Avoid contact with Eyes, Skin, in case of contact, wash with copious amounts of water immediately.
Freezing Point - 17 0 c

Nitrite (as PPM NO2)       0                   100-200      300-600        700-900      1100-1300    1440-2400
RXSOL CIDC /1000L      13.0               11.3    8-10       5-7               1.5-3.5    0

Remarks:

METHOD OF USE
1. Properly clean the system with water and alkaline liquid, if necessary.
2. Add 0 .15-1.5 % of RXSOL CIDC in the system or recommended Nitrite level 1400 – 2500 ppm can be measured and controlled by any standard RXSOL test kit for Nitrite, Chloride test also helps to detect excess contamination to maintain acceptable levels. when the product is dosed as recommended limit By buffering action of RXSOL CIDC, pH should be maintained between 8.3 and 10 by the treatment.

Images:

Calcium Hydroxide

Product Short Description: Calcium Hydroxide pure powder

Product Technical Specification:

Chemical Characteristics

Parameter	Test Method	Test Result
Calcium Hydroxide Ca(OH)2	ASTM C-25	98.0 % min
Iron Oxide Fe2O3	ASTM C-25	0.30 % max
Aluminium Oxide Al2O3	ASTM C-25	0.20 % max
Sulfur S	LECO	0.16 % max
Insoluble matters		0.5 % max
Chloride ppm Cl	LECO	320 max
Magnesium Oxide MgO	LECO	0.7 % max
Phosphate ppm PO4	LECO	600 max
Silicon Oxide SiO2	LECO	0.50 % max
Carbon Dioxide, wt % CO2	LECO	0.85 % max
Humidity % H2O	ASTM D-95	1.0 % max.

Appearance	White Powder
Odor	Odorless
Density	2.211 g/cm3, solid
Calcium (Ca)	53.50%
Crystalline Silica	<0.1%
Acid Insoluble Substances	0.07%
Silica (SiO2)	0.2%

Remarks:

Products based on calcium hydroxide have a surprisingly wide variety of applications. The fact is that slaked lime has been used since time immemorial and with amazing results. Some of imprtant application as below -

Waste Water/Water Treatment
Construction
Flue Gas Treatment
Chemical Processes and Chemical Reactions
Petrochemicals
Calcium Salts (citrates, phosphates, stearates),
Acid Neutralization
Chemical Reactions
Calcium Enrichment (food, pharmaceutical, neutraceutical).

Calcium hydroxide can be found in the food industry providing calcium and as a pH modifier, as well as in the management of gases, as it has a high effectivity in the capture of acidic pollutants from industrial smoke and vapours. It is also an additive in feeds improving animal nutrition, and is used in animal-pens for its disinfecting power, lowering the number of pathogens and virus. In the sugar-industry it can be used to precipitate out impurities and to obtain purified sucrose.

It also brings benefits in sludge treatment as it is an exceptional aid in the elimination of micro-organisms and bacteria which at the same time neutralizes bad smells.Its properties are especially useful for water treatment, because it acts as a clarifier, a coagulant, a neutralizer and for the precipitation of dissolved pollutants.

Images:

Oxalic Acid 5 Kg

Product Short Description: Oxalic acid works with rust on rusty metal to get dissolved chemically. Oxalic Acid work with ink to get dissolve. It can be used in laundry facilities as an acid rinse that helps to get of rust and ink stains. The oxalic acid chemically reacts with the rust and ink makes it much easier to wash the

Product Technical Specification:

Remarks:

First Aid
IF SWALLOWED -Give 1 or 2 glasses of water and call for medical assistance immediately.
EYE CONTACT - Wash with plenty of water for at least 15 minutes; Get medical attention promptly.

Images:

COAL REMOVER RX Hold

Product Short Description: A powerful penetrating mixed chemical products to remove heavy coal deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems.

Product Technical Specification:

**Read the Material Safety Data Sheet before using this product.**

Other Valuable Hold Cleaners :::

Cement Remover RX Hold ::: Highly concentrated and powerful penetrating agents materials which is effectively react with cement to loosen the bonding strength . Best results can obtain on dry surface of cement. RXSOL'S R & D has developed this molecular cement dissolver. Part No.- RXSOL-22-2202-025, Part No.- RXSOL-22-2202-020, Part No.- RXSOL-22-2202-050

Part No.- RXSOL-22-2202-035, Part No.- RXSOL-22-2202-210

Slip Barrier Coat RXSOL HOLD BLOCK ::: Polymer EMULSION BASED non reactive coating materials which makes thin film barrier on surface after dry. Due to formation of RXSOL THIN barrier film on surface, the cleaning operation after unloading becomes quicker and easier with optimum results. Part No.- RXSOL-22-2210-210, Part No.- RXSOL-22-2210-025, Part No.- RXSOL-22-2210-050

BARRIER HOLD COAT ::: Highly effective ecofriendly Product blending of natural ingredients which is provide thin temprory film on Hold Surface to protect corrosion. This is making barrier between corrosive cargo like Sulphur, Salt, Petcoak, Cement etc and Hold surface. Part No.- RXSOL-22-2211-210

COAL REMOVER rx hold ::: A powerful penetrating mixed chemical products to remove heavy coal deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems. Part No.- RXSOL-22-2215-210, Part No.- RXSOL-22-2201-025, Part No.- RXSOL-22-2201-050

Hold Wash Concentrate RX ::: RXSOL hold wash is a versatile all purpose marine cleaning solution it can be used as a powerful stand alone cleaner for Petroleum oily stains and residues, vegetable and animal fats, as well as dirt, proteins, soils, coal, ore, coke or in combination. Part No.- RXSOL-22-2204-210, Part No.- RXSOL-22-2204-025, Part No.- RXSOL-22-2204-050

Rock Phosphate Cleaner rx hold ::: A powerful penetrating mixed chemical products to remove heavy Rock Phospate deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems. Part No.- RXSOL-22-2201-210

PCS Hold Clean ::: RXSOL PCS is an innovative, concentrated liquid product specifically engineered to attack, penetrate and remove Coal Carbon, pet coke, lime deposition accumulations from cargo and storage tanks, Also Developed for cargo hold cleaning to remove stains. Part No.- RXSOL-22-2208-210

HBI CARGO Hold Wash Concentrate RX::: RX HBI CARGO Hold Wash Concentrate RX is a versatile all-purpose QUALITY marine cleaning solution. It can be used as a powerful stand-alone cleaner for HBI CARGO . it can be used as a powerful\ stand alone cleaner for HBI CARGO dust and deposition. Part No.- RXSOL-22-2216-210, Part No.- RXSOL-22-2216-025

Remarks:

Safety And Handling :-

“RXSOL-22-2201” is completely safe to handle, being non-toxic & non corrosive.As with all chemicals general safety and handling procedures apply. Avoid contact with eyes as irritation may occur. Do not take internally. In case of contact with eyes, flush eyes immediately and cupiously with clean running water for 15- minutes and seek medical attention.

Images:

Search form

Combotreat New Formulla

Sludge Conditoner for Boiler Water 20 Ltr

FORMIC ACID

DI OCTYLPHTHALATE

Hardness Test Kit for BOILER

Ammonium Bisulfite

ETHYL ACETATE

Descale Powder

Corrosion Inhibitor for Diesel Cooling Water Treat

Calcium Hydroxide

Oxalic Acid 5 Kg

COAL REMOVER RX Hold

HAVE A QUESTION?

Ask a question - WebForm Inline

LiveChat