Your shopping cart is empty.
| PRODUCT NAME | : | FORMICACID |
| CAS number | : | 64-18-6 |
| UN number | : | 1779 |
| Formula | : | HCOOH |
| Odour | : | PENETRATING |
| Solubility in water | : | COMPLETE |
| Density | : | 1.22 at 20 oC |
| Boiling point | : | 101oC |
| Melting point | : | 8 oC |
| Viscosity | : | 1.80 cp at 20oC |
| Flashpoint | : | 42oC |
| Explosive limits | : | 10 – 45.5 Vol% |
| Vapour pressure | : | 42 mbar at 20oC |
| Skin absorption/irritation | : | YES |
| TLV Country NL Year 1995 | : | 5 ppm 9 mg/m3 |
| Pollution category 1994 | : | D |
|
Physical state and appearance |
Snow White Solid. |
|
Odor |
Odorless. |
|
Taste |
Not available. |
|
Molecular Weight |
136.29 g/mole |
|
Color |
White. |
|
Assay % |
Refer below for various grade |
|
Boiling Point |
732°C (1349.6°F) |
|
Melting Point |
290°C (554°F) |
|
Critical Temperature |
Not available. |
|
Specific Gravity |
2.907 (Water = 1) |
|
Vapor Pressure |
Not applicable. |
|
Vapor Density |
4.7 (Air = 1) |
|
Volatility |
Not available. |
|
Odor Threshold |
Not available. |
|
Water/Oil Dist. Coeff. |
Not available. |
|
Ionicity (in Water) |
Not available. |
|
Dispersion Properties |
See solubility in water. |
|
Solubility |
See solubility in water. |
| PARTICULARS | H.P. GRADE | TECHNICAL | COMMERCIAL | SOLUTION |
| ASSAY (%) | 98-99 | 90-92 | 80-85 | APCR |
| APPEARANCE | SNOW WHITE | SNOW WHITE | SNOW WHITE | CLEAR SOLUTION |
| AMMONIA (AS NH4CL) % | < 1 | < 5 | 10-15 | APCR |
| ALKALIES & ALKALINE EARTH (%) | < 1 | < 1.5 | APCR | APCR |
| IRON (PPM ) | < 10 | < 15 | < 15 | < 15 |
| LEAD (PPM ) | < 10 | < 15 | APCR | APCR |
| NICKLE (PPM) | < 2 | < 2 | APCR | APCR |
| COPPER (PPM) | < 2 | < 2 | APCR | APCR |
| COBALT (PPM) | < 2 | < 2 | APCR |
APCR |
Use of the Zinc Chloride are Following :
Fluxes :
The property to attack metal oxide and salts from metal surface and gives good metal to metal bonding make Zinc Chloride a better raw material for fluxes.
________________________________
Dry Cell Batteries :
Zinc Chloride is used in Dry Cell Batteries as an electrolyte and also as a moisture absorbent and corrosion inhibitor.
________________________________
Glue :
It is used in manufacture of Glue, Paper, Cosmetics, Synthetic, Fibers, Disinfectants and Fire Fitting form.
________________________________
Electro Plating :
It is one of the main raw material for manufacturing of electroplating chemicals.
________________________________
Wood Preservative :
It is also a good preservative.
________________________________
Water treatment Chemicals :
It is using in water treatment because of corrosion inhibitor property.
________________________________
Catalysts :
Zinc Chloride is used as a catalyst in production of methylene chloride from methyl alcohol.
________________________________
Petroleum :
It is used to separate water from oil as it is a good emulsion breaker. It is also used in oil and gas wells.
________________________________
Rubber Vulcanization :
It is used as accelerator in the vulcanizing process of rubber.
________________________________
Anteseptic AND Deodorant Preparation :
Zinc Chloride is also used to prepare antiseptics and deodorants.
________________________________
Textile Finishing :
Zinc chloride is a more active catalyst than magnesium chloride and almost as active as zinc nitrate. It does not contribute to resin yellowing on white goods and has little effect on dye shades in tinted materials. The textile grade is used as a catalyst in resin systems that impart a durable-press or wash and wear finish to cotton and cotton synthetic blend fabrics. Zinc Chloride 50% Solution also serves as a high quality mercerizing agent for cotton.
________________________________
Raw Material & Other Chemicals :
Zinc Chloride is an excellent source of zinc and used as a raw material for the production of other zinc chemicals.
| PRODUCT NAME | : | DIETHYLPHTHALATE |
| CAS number | : | 84-66-2 |
| UN number | : | |
| Formula | : | C6H4(CO2C2H5)2 |
| Odour | : | ODOURLESS |
| Solubility in water | : | INSOLUBLE |
| Density | : | 1.12 at 25 oC |
| Boiling point DIN 53171 | : | 294-298°C |
| Melting point | : | -40oC |
| Pour Point, DIN ISO 3016 | ||
| Viscosity , ASTM D 445 | : | 10.16 CPS |
| Flashpoint | : | 150 oC |
| Acid Value ASTM D 1045 / D 1613 | 0.360 | |
| Explosive limits | : | |
| Retractive Index ASTM D 1807 | 1.501 | |
| Vapour pressure | : | 01 mbar at 20 oC |
| Skin absorption/irritation | : | YES |
| TLV Country NL Year 1989 | : | ppm 5 mg/m3 |
| Pollution category 1994 | : | C |
|
DIETHYL PTHALATE |
||
|
Test |
Methos |
Results |
|
Estergehalt Estercontent |
G.C. |
99.88% |
|
Wagger water |
ASTME 203 |
0.089% |
|
Farbe (pt - co) colour |
ASTMD 1209 |
75 |
|
Viskositat bei 20°C Viscosity |
ASTM D 445 |
10.16 CPS |
|
Di ethe bei 20°C Density |
ASTM D 4052 |
1.117 g/cm³ |
|
Saurezahl Acid value |
ASTM D 1045 / D 1613 |
0.0360 |
Sodium carbonate odourless powder with hygroscopic quickly absorbs moisture
Sodium Carbonate results strong alkaline solution in water.
Sodium Carbonate is also use as a water softener.
HSN Code : 28362010
IMDG Identification :Not Regulated for Transport (Non-Haz)
Molecular Formula : Na2CO3
Molecular Weight : 105.99
Storage : Room Temperature
Shelf Life : 60 Months
Sodium Carbonate CAS No is 497-19-8
Sodium carbonate odourless powder with hygroscopic quickly absorbs moisture
Sodium Carbonate results strong alkaline solution in water.
Sodium Carbonate is also use as a water softener.
HSN Code : 28362010
IMDG Identification :Not Regulated for Transport (Non-Haz)
Molecular Formula : Na2CO3
Molecular Weight : 105.99
Storage : Room Temperature
Shelf Life : 60 Months
Sodium Carbonate CAS No is 497-19-8
|
TECHNICAL SPECIFICATION Of BLUE SILICA GEL available in BREATHER |
|
|
DESCRIPTIONS |
SILICA GEL BLUE |
|
Assay (as SiO2) |
98 % |
|
pH |
6.8 - 7.2 |
| Melting point | 1610oC |
| Boiling Point | 2230oc |
|
Bulk Density gm/ltr |
0.600 – 0.700 |
| Density | 2.6 |
|
Loss on Drying % |
4 - 6 % |
|
Loss on Attrition |
2.5 % Max |
|
Adsorption Capacity at 100 % humidity |
35 - 40 % |
|
Friability |
99.5 |
|
Chloride (as Nacl) |
Max. 0.5% ppm |
|
Sulfates (as Na2SO4) |
Max 0.5 % ppm |
|
Cobalt Chloride (as CaCl2) |
0.5 – 0.7 % |
|
Ammonium Compound (as NH3) |
0 % |
|
Binder as CaSO4 |
0 % |
|
Dimethyl Fumrate (DMF) |
0 % |
|
Particle size |
4 - 6 |
Silica Gel Details
CAS No. : 112926-00-8
Chemical Name : Silica gel
CBNumber : CB1199389
Molecular Formula : O2Si
Formula Weight : 60.08
SPECIFICATION FOR TYPE C SILICA GEL:
| Loss on drying : | Not more that 5% mass |
| Absorption Capacity : | 27% min on the basis of mass |
| PH : | 3.5 to 8. |
| Chlorides : | 0.05% by mass max |
| Cobalt (as CoCl2) : | 0.4 by mass max |
| Ammonium compounds (as NaH3): | 0.5% by mass max |
| Sulphates (Na2SO4) : | 0.5% by mass max |
| Industrial Packing: |
25 / 50 kgs M S drum (Smaller packing available). |
Characteristics :
| Color | Grey |
| Purity | 99% |
| Form | Crystal |
| Packaging Type | HDPE Bag |
| Density | 700 kg/m³ |
| Molar Mass | 60.08 g/mol |
SPECIFICATION FOR TYPEB SILICA GEL:
| Loss on drying : | Not more that 5% mass |
| Absorption Capacity : | 27% min on the basis of mass |
| PH : | 3.5 to 8. |
| Chlorides : | 0.05% by mass max |
| Cobalt (as CoCl2) : | 0.4 by mass max |
| Ammonium compounds (as NaH3): | 0.5% by mass max |
| Sulphates (Na2SO4) : | 0.5% by mass max |
| Industrial Packing: |
25 / 50 kgs M S drum (Smaller packing available). |
Characteristics :
| Material | Natural Quartz |
| Color | Multicolor |
| Purity | 99% |
| Feature | Premium Quality, Safe Packaging |
| Packaging | Bag |
| Form |
Crystal |
SPECIFICATION FOR SILICA GEL INDICATING (BLUE) / NON INDICATING (WHITE):
| Loss on drying : | Not more that 5% mass |
| Absorption Capacity : | 27% min on the basis of mass |
| PH : | 3.5 to 8. |
| Chlorides : | 0.05% by mass max |
| Cobalt (as CoCl2) : | 0.4 by mass max |
| Ammonium compounds (as NaH3): | 0.5% by mass max |
| Sulphates (Na2SO4) : | 0.5% by mass max |
| Industrial Packing: |
25 / 50 kgs M S drum (Smaller packing available). |
Characteristics :
| Color | Grey |
| Purity | 99% |
| Feature | Premium Quality, Safe Packaging |
| Packaging | Bag |
| Form | Crystal |
| Sachet Pack Size | 1-10kg |
|
Specifications |
Extra Pure |
Industrial |
|
Sodium Acetate |
CH3COONa |
CH3COONa |
| CAS | 127-09-3 | 127-09-3 |
| Molecular Weight | 82.03 | 82.03 |
| Physical Appearance | Snow White PowderWhite | Off White Powder |
| Assay (Min.) | 99% | 98% |
| Loss on Drying (LOD) | 1% Max | 2% Max |
| pH of 5% Aqueous Solution | 7.5 - 9.0 |
7.5 - 9.0 |
| Specific Gravity | 1.528 (Water = 1) | |
| Solubility | Easily soluble in cold water, hot water. |
Odor: Odorless to acetic (Slight.)
Taste: Not available.
Boiling Point: Not available.
Melting Point: 324°C (615.2°F)
Critical Temperature: Not available.
Specific Gravity: 1.528 (Water = 1)
Vapor Pressure: Not applicable.
Vapor Density: Not available.
Volatility: Not available.
Odor Threshold: Not available.
Water/Oil Dist. Coeff.: Not available.
Ionicity (in Water): Not available.
Dispersion Properties: See solubility in water.
Solubility: Easily soluble in cold water, hot water.
10588-01-9 (Anhydrous)
7789-12-0 (Dihydrate)
PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE Odorless Orange to Red crystals or granules
MELTING POINT 357 C
BOILING POINT 400 C
SPECIFIC GRAVITY 2.35
SOLUBILITY IN WATER Highly soluble (74.0% at 25°C)
pH 3.0 - 4.6 upon concentration
VAPOR DENSITY 10
NFPA RATINGS
Health: 4; Flammability: 0; Reactivity: 2; Special Hazard: OX
FLASH POINT 400 C
STABILITY Stable under ordinary conditions
