Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
Your shopping cart is empty.
1. Appearance : White To Off White Free Flowing Powder
2. Density : Na
3. Solubility In Water : Soluble
4. Odour : Nothing Characteristic
5. pH : Alkaline
RXSOL Gbond AL 38 is alkaline Product , so avoid to contact with naked skin, eye and Acidic nature materials.
| Appearance | Greenish-yellow |
| Odor | Lemon scent |
| Solubility in Water | Complete |
| Specific Gravity | 0.990-1.000 |
| pH (l%) | 10.3-10.5 |
Other Grade of Coil Cleaner :::
Coil Brite Rx Yellow - Part No.- RXSOL-16-1680-005 --- www.rxmarine.com/coil-brite
Coil Cleaner - Part No.- RXSOL-41-8672-025 --- www.rxmarine.com/Coil-Cleaner-RXSOL
Coil Cleaner ( Non Rinsing Type ) - Part No. - RXSOL-16-1697-025 --- www.rxmarine.com/coil-cleaner-non-rinsing
Condenser Coil Cleaner - Part No.- RXSOL-50-5015-025 --- www.rxmarine.com/Condensor-cleaner
Evaporator Coil Cleaner ::: Part No.- RXSOL-51-6004-025 --- www.rxmarine.com/evaporator-coil-cleaner
Coil Cleaner Free from ACID ::: Part No.- RXSOL-16-1082-025 --- http://rxmarine.com/Coil-Cleaner-Free-from-ACID
C-SHINE Alkaline coil cleaner ::: Part No- RXSOL-16-1668-025 --- www.rxmarine.com/C-SHINE-RXSOL-coil-cleaner
Properties:
Specific gravity (at 20°C) : >1
Flash point (10%) : ± 70 °C
pH (10%) : 10.0
Colour : Green / Colourless
Odour : Citrus
Spray
Brush
Soak
Circulation or high-pressure wash systems
Strong Emulsifying Action: Breaks down stubborn hydrocarbon residues and converts them into easy-to-rinse emulsions.
Highly Concentrated: Can be diluted for economy or used neat for tough cleaning jobs.
Multi-Surface Application: Safe for use on steel, painted surfaces, and most industrial equipment when used as directed.
Versatile Use: Suitable for cleaning tanks, bilges, engine parts, floors, cargo holds, machinery, and workshop surfaces.
Water Rinsable: Leaves residue free after rinsing with fresh water.
PHYSICAL PROPERTIES
Rxsol -16-1007-025 is a concentrated hydrocaron based liquid mixture, non–corrosive with strong emulsifying agents and surfactants.
Appearance / Color : Clear, colorless liquid
Specific gravity : 0.85 gr/cm3 at 15°C
Flash Point : > 70°C
Odor : Aromatic Solvent
Feature and Benifit
• Non–corrosive and safe to use in all types andkinds of filters.
• Preserves, protects and maintains the operational capabilities of the filter by thorough and complete cleaning.
• Provides quick and efficient action.
• Its pure, high quality components readily remove oil and grease deposits, even when dry.
• Can be combined with a specific range of products.
• Safe to use on all metals and their alloys as well as those with inorganic clay finishes.
• Attacks and dissolves water/oil emulsions and concentrations.
• Cost effective, easy to apply and use.
INSTRUCTIONS FOR USE:
Use of RXSOL-16-1095-025 is not restricted to a particular method of cleaning. Depending on the operating conditions, RXSOL-16-1095-025 can be used in a dip bath, in a spraying plant, in steam jetting or in manual application using a cloth, brush or sponge. It can be used warm or cold. RXSOL-16-1095-025 is miscible with water - even seawater.
Concentration for mesh cleaning: 1 : 2,5
Temperature: up to a maximum of 60 °C
The concentration depends on the type and thickness of the adhesive substance to be removed. When used in concentration below 1 : 30 rinsing is usually not required. No visible film remains on the surface
NOTE ::: Drained the automatic filter by automatic back-flushing (i.e. all filter chambers).
1 Then soak the filter element assembly, with the openings of the candle elements facing down in a suitable tank filled with RXSOL-16-1095-025 solvent.
2 The soaking time is completely depends on cleaning method :
a)In cold RXSOL-16-1095-025 cleaner the maximum soaking time is 24 hours.
b)In hot solution the maximum soaking time is 12 hours.
3. After soaking remove the whole filter element assembly from the tank and for dry to keep all parts on place it on a suitable perforated sheet metal.
4. Then you may blow compressed air through the candles from the inside to the outside.
5. After this procedure the complete filter element assembly should be immersed in fresh cleaner, with the candle element opening down-wards, and rinsed through with an up and down motion.
6 Allow the filter element assembly to drain again and dry it by blowing compressed air through it again from the inside to the outside. The manual cleaning procedure described here has produced adequate results (ca. 60 % clean) in similar applications.
Note : CLEANING of filter can be enhance with high pressure machine.
RXSOL-16-1095-025 is a fluid cleaning and degreasing agent with a wide range of application. It can be used for practically all cleaning and degreasing purposes.
RXSOL-16-1095-025 cleans rapidly, thoroughly and extremely economically.
Use of RXSOL-16-1095-025 renders safety precautions superfluous.
RXSOL-16-1095-025 has these outstanding characteristics without exhibiting the
isadvantages of solvent cleaners.
RXSOL-16-1095-025 is non-flammable and free from caustic
This product is biologically degradable
RXSOL-16-1095-025 can be undercooled or overheated during storage but remains fully usable when returned to normal temperature.
Effectively removes tenacious carbon deposits, burnt grease, Oily residues and lacquers , from fuel oil and lube oil purifiers, filters, separators
An all purpose liquid cleaner with grease-cutting formula for cleaning greasy kitchen dirt. Use diluted or at full strength.
| PRODUCT NAME | : | PHOSPHORIC ACID Cleaner |
| CAS number | : | 7664-38-2 |
| UN number | : | 1805 |
| Formula | : | H3PO4 + Corrosion inhibitor + Surfactant |
| Odour | : | |
| Solubility in water | : | COMPLETE , ( 5.48 g/mL ) |
| Density | : | 1.5 at OC |
| Boiling point | : | 213 OC |
| Melting point | : | 42 OC |
| Viscosity | : | 147 cP (100 %) |
| Flashpoint | : | NA |
| Explosive limits | : | NA |
| Vapour pressure | : | 0 mbar at 20 OC |
| Skin absorption/irritation | : | YES |
| TLV Country NL Year 1995 | : | ppm 1 mg/m3 |
| Pollution category 1994 | : | D |
• Do not mix with any other cleaner as harmful fumes may result.
• Acids may etch, lighten or change the color of cementitious materials and some natural stones such as marble and limestone. ALWAYS TEST FIRST.
• Use caution near carpets, colored grout and colored cement tile.
CAUTIONS: Phosphoric acid. Avoid prolonged contact with skin. If contact is made, wash immediately with soap and water. If ingested, DO NOT INDUCE VOMITING. Drink Milk of Magnesia or milk. Call a physician. If contact with eyes occurs, flush with water for 15 minutes. Call a physician.
KEEP OUT OF REACH OF CHILDREN :::::: READ COMPLETE INSTRUCTIONS BEFORE USING
STORAGE & HANDLING
Generally use in solution with water; may be used full strength! Store tightly capped in original container to prevent evaporation! Unused, store product is freeze-thaw stable! Store in cool, dry place.
We are marine chemical supplier since 1996.These Marine Chemicals include different sets of products such as Tank Cleaners, Maintenance Chemicals, Cooling Water Treatment Chemicals, Boiler Water Treatment Chemicals, Fuel Additives, etc.
Oman Chemical is leading one Largest Supplier, Manufacture a
Oman Chemical is leading one Largest Supplier, Manufacture a
