Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
Your shopping cart is empty.
Product Code: RXSOL-81-2204-210
|
Mol. Formula |
H2O |
|
M.W |
18.015 |
|
Conductivity |
< 2.0 S/CM |
|
PH |
6.00 -7.50 |
|
Total Hardness |
< 0.2 mg/l as CaCo3 |
|
Chloride |
< 0.1 mg/l as Cl |
|
Total Alkalinity |
< 0.1 mg/l as CaCo3 |
|
Iron |
< 0.02 mg/l as Fe |
|
Copper |
< 0.03 mg/l as Cu |
|
Nickel |
< 0.01 mg/l as Ni |
|
Oxygen |
< 0.01 mg/as O2 |
|
Silica |
< 0.005 mg/l as SiO2 |
|
Substances reducing permanganate |
0.00004 |
Advantages of using Hydrotesting Water
Hydrostatic testing remains the preferred inspection method for pressure systems because it offers several important benefits.
Reliable Leak Detection
Testing under pressure reveals small leaks that could become major failures during operation.
Cost Savings Through Early Detection
Identifying structural weaknesses during testing prevents expensive repairs or catastrophic failures later.
Regulatory Compliance
Hydro tests help organizations meet industry regulations and safety standards.
Extended Equipment Life
Routine testing verifies system integrity and supports long-term asset reliability.
By validating pressure containment systems before operation, hydrostatic testing protects personnel, equipment, and the environment.
Product Code: RXSOL-81-2066-200
| Property | Typical Value |
|---|---|
| Appearance | Clear to slightly hazy liquid |
| Colour | Colourless to pale yellow |
| Odour | Characteristic fatty/alcohol odour |
| Specific Gravity @ 25°C | 0.82-0.85 |
| pH | Not applicable / practically neutral |
| Viscosity @ 25°C | Typically 10-20 cP |
| Flash Point | Typically >50°C |
| Water Solubility | Low; dispersible depending on system |
| Silicone Content | Nil |
| Ionic Character | Non-ionic |
| Active Matter | ~100% |
Mode of Action of FOAM KNOCKDOWN
The hydrophobic alcohol components migrate toward the air-liquid interface and interfere with the surfactant film surrounding the foam bubble.
The antifoam disturbs the elastic surfactant layer, promoting thinning and rupture of the bubble wall.
Antifoam AF20 provides rapid foam-breaking activity. Published testing has demonstrated rapid collapse of foam following addition of Antifoam AF20 .
Antifoam AF 20 with its longer hydrocarbon chain, contributes to a more persistent hydrophobic phase that can remain active during continued agitation.
The combination is intended to reduce the tendency of foam to regenerate after agitation, pumping, aeration or circulation.
Product Code: RXSOL-81-4160-025
| Form | Solid |
| Colour | White |
| Odour | None |
| Odor Threshold | Not Applicable |
| pH | 6-8 |
| Melting Point | Not Applicable |
| Flash Point | >100°C |
| Autoignition temperature | >200°C |
| Vapour pressure (mm Hg) | 0.13 @ 20°C |
How does LCM Lost Circulation Material work in drilling?
When the dry polymer comes into contact with water, the cross-linked polymer network rapidly absorbs water.
The polymer particles expand and form a swollen, cohesive mass.
Dry polymer → Water absorption → Rapid swelling → Particle expansion → Fracture/void filling → Loss reduction
The cross-linked structure prevents the polymer from simply dissolving into the drilling fluid. Instead, the material maintains its three-dimensional polymer network while retaining absorbed water.
Product Code: RXSOL-81-8167-025
| Property | Typical Value |
|---|---|
| Appearance | Clear to slightly amber liquid |
| Physical State | Liquid |
| Odour | Mild / characteristic |
| Solubility in Water | Completely soluble |
| pH, neat | 6.5-7.5 |
| Specific Gravity at 25°C | Approx. 1.12-1.20 |
| Flash Point | Not applicable / aqueous product |
| Flammability | Non-flammable |
| Ionic Character | Anionic / chelating system |
| Freezing Point | Dependent on formulation |
| Viscosity | Low to moderate |
| VOC | Low |
| Colour | Colourless to pale amber |
Which industry utilizes RXSOL Iron Control Liquid?
Product Code: RXSOL-81-8156-025
Chemical Composition :
| Caco3 | : | 48 % to 56 % |
| Mgco3 | : | 34 % to 43 % |
| Silica | : | 1.05 % |
| Cao | : | 31.08 % |
| Mgo | : |
20.10 % |
Product Code: RXSOL-25-1024-100
Chemical Name: Potassium Hydroxide Solution
Common Name: Caustic Potash
Chemical Formula: KOH
Concentration: 30% w/w
Physical Form: Clear, colorless liquid
Nature: Strongly alkaline
Solubility: Completely miscible with water
Application: Electrolyte and industrial chemical
Product Code: RXSOL-81-1372-210
Product Code: RXSOL-81-8119-2000
Product Code: RXSOL-81-6604-220
| Property | Typical Specification |
|---|---|
| Appearance | Clear, colourless to pale yellow liquid |
| Odour | Mild characteristic odour |
| pH at 25°C | 7.0-10.5 |
| Specific Gravity at 25°C | 1.15-1.18 |
| Solubility in Water | Completely soluble |
| Freezing Point | Below 0°C, formulation dependent |
| Flash Point | Not applicable |
| Flammability | Non-flammable |
| Ionic Character | Anionic |
| Shelf Life | 24 months under recommended storage conditions |
Product Code: RXSOL-81-2064-210
Physical Data:
| Physical appearance | Clear free flowing pale yellow to brown colour homogeneous liquid |
| Active Ingredient | More then 95 Percent |
| Charge | Anionic |
| Specific Gravity @ 25° C | 0.92 ± 0.02 |
| Viscosity @ 25° C | < 30 cps [cst] |
| Pour Point | < 0° C |
| ph range | 5.0 – 8.0 |
| Solubility in Hydrocarbons | Soluble |
| Solubility in water | Insoluble |
| Flash point ° C | >60° C |
| Shelf Life | Minimum two years |
| Packing | 210 Ltrs. |
| Storage Condition | -15 to 55 Degree C |
Prevents sludge formation when hydrocarbons react with acids.
Enhances wetting properties for better interaction with formation materials.
Suitable for both sandstone and carbonate acidizing.
Supports smoother acid stimulation operations by eliminating sludge-related challenges.
We are marine chemical supplier since 1996.These Marine Chemicals include different sets of products such as Tank Cleaners, Maintenance Chemicals, Cooling Water Treatment Chemicals, Boiler Water Treatment Chemicals, Fuel Additives, etc.
Oman Chemical is leading one Largest Supplier, Manufacture a
Oman Chemical is leading one Largest Supplier, Manufacture a
