Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
Your shopping cart is empty.
Specifications for Methyl Ethyl Ketone (MEK):
| Parameter | Value |
| Molecular Formula | C4H8O |
| Mol | Wt 72.10 |
| CAS # | [78-93-3] |
| Description | Clear colurless liquid |
| Sp gravity @ 20/20 deg cel | 0.806 – 0.808 |
| Flash point in deg cel | (-) 7 |
| Distillation range in deg cel | 79 – 80.5 |
| Purity (%) | 99.7 min |
| Water (%) | 0.1 max |
| Acidity as acetic acid in ppm | 30 max |
Uses:
| MEK is widely used in the following applications : |
| Lubricating oil dewaxing |
| Adhesives |
| Printing Inks |
| Magnetic Audio Video tapes |
| Polyurethane resins |
| Artificial Leather |
| PVC film/Leather cloth industry |
| Specialty Paints |
| MEK Oxime manufacture |
| MEK Peroxide manufacture |
| Aroma Chemicals such as Methyl Pentanone |
| Degreasing of metal surfaces, particularly Aircraft parts |
|
Epoxy glass laminates for the electronic industry |
It is highly concentrated and powerful penetrating agents materials which is effectively react with cement to loosen the bonding strength . Best results can obtain on dry surface of cement. RXSOL'S R & D has developed this molecular cement dissolver as an alternative to using hazardous acids for concrete removal. Back-Set is a one-of-a-kind formula.
RXSOL-22-2202-035 turned this vulnerability into an opportunity. "Back-Set" safely removes hardened concrete from a variety of difficult to clean surfaces. It break down the ionic bond in portland cement, releasing the cement from any surface to which it has adhered.
This liquid mixture specifically designed to deal with hard cases of cement cargo deposits or dry cement stains. Its proven advantage is the provision of immediate penetration and complete dissolution of cement, the result being a thorough cleaning.
Chemically Back-Set converts the positive ions in the hardened matrix into negative ions, which dissolves the cement into mud that can be rinsed away. Because it works chemically, rather than mechanically, Back-Set may be used to remove cured concrete, mortar, grout, and stucco from virtually any surface without harm.
1. Apply cement remover on cement, to loosen the bond between the cement and the surface.
2. Give Sufficient time of reaction will loose bond of cement completely.
3. Repeat the 1st step on the cement for at least an hour or two.
4. For hot climate avoid evaporation, reapply frequently to keep the area moist.
5. After the cement starts to loosen, scrub the area with either a brush, Scotch Brite pad or scouring pad.
6. If a small amount remains, reapply Cement dissolver chemical and allow it to set again.
7. Scrub again until all of the cement is removed.
8. Flush the area with water.
9. Neutralise and Wash the area with alkaline soap and water.
RXSOL paint Remover MC is a specially surfactant base remover which is intended to assist in the removal of high strength coatings such as epoxies, urethanes, and enamels. Its quick reactivity makes it ideal for spot treating areas requiring paint removal (some types of graffiti).
Rx Marine International manufactures various type paint remover designed to remove a variety of coatings from various masonry surfaces. Applications include the removal of graffiti, multiple layers of paint, high-strength coatings, clear water repellents, wax, acrylic-based stucco finishes, and some vegetative stains.
This is not Solvent Based, Hydroxide Based Viscous liquid to remove and stripp PAINTS. Formulated specifically for the removal of multiple layers of paint especially from older surfaces where high pressure cleaning could prove destructive to the substrate.
PRODUCT PROPERTIES
APPEARANCE Clear Colourless Liquid
COMPATIBILITY METAL No known effect RUBBER May Swell
PACKAGING Order no.: Size 50 / 25 LTR RXSOL-18-1014-050
FIRSTAID &STORAGE:- Contact with skin can cause serous chemicals burns .Avoid contact with skin & eyes.Wear PVC gloves while handling. Do not take internally. Spl-ashes of the product or its solutions on the skin or clothing should washed immediately with cupious amount of water . If the eyes are affected should be washed with water for at least 15 minutes and seek medicals attention sought immediately. Keep drums tightly closed when not in use.
Description: Solvent Mixture
|
Test Description |
Typical Values |
Unit of Measure |
Test Method |
|
TYPICAL VALUES |
|||
|
Solvent Cotent |
99 |
ASTM D1319 |
|
|
Distillation Range |
|||
|
IBP |
117 |
oC |
ASTM D86 |
|
DP |
173 |
oC |
ASTM D86 |
|
Flash Point (Abel) |
44 |
oC |
IP170 |
|
Density @ 15 oC |
>0.85 |
Kg/l |
ASTM D4052/1298 |
|
Conductivity@ 23oC |
450 |
pS/m |
ASTM D2624 |
|
Composition |
|||
|
Paraffins |
1 |
%(w/w) |
|
|
Napthenes |
0 |
%(w/w) |
|
|
MIX SOL. |
99 |
%(w/w) |
|
Technical Specifcation / Typical Properties
| Form | Solid |
| Colour | Black |
| Particle Shape | Amorphous |
| Carbon Content, % | 97.0 |
| Average Particle Size, | 0.005 µ |
| Specific Surface Area (m²/g) | 44.00 |
| Oil Absorption, (g/100g) | 134 |
| +325 Mesh Retention, % | 0.004 |
| pH | 9 |
| Water Soluble Salts, % | 0.20 |
|
H2O |
0.50 |
| Ash% | 0.60% |
| Toulene Discoloration Transmission, % | 80.00 |
| Specific Gravity | 1.79 |
Physical properties
| Colour | Light grey |
| Solids (vol %)* | 100 ± |
| Flash point | None-flamable |
| Specific Gravity | 2,3 kg/ltr |
DISCLAIMER
The information in this data sheet is given to the best of our knowledge based on laboratory testing and practical experience. However, as the product can be used under conditions beyond our control, we can only guarantee the quality of the product itself. We also reserve the right to change the given data without notice. Minor product variations may be implemented in order to comply with local requirements.
Rx Marine International is a World Wide company with factories, sales offices and ware house in all the ports of india and UAE . please visit our website at www.rxmarine.com.com
We are marine chemical supplier since 1996.These Marine Chemicals include different sets of products such as Tank Cleaners, Maintenance Chemicals, Cooling Water Treatment Chemicals, Boiler Water Treatment Chemicals, Fuel Additives, etc.
Oman Chemical is leading one Largest Supplier, Manufacture a
Oman Chemical is leading one Largest Supplier, Manufacture a
