Your shopping cart is empty.
CHEMICAL COMPOSITION:
Sodium Bicarbonate NaHCO3 % : 98 MIN.
Sodium Carbonate Na2CO3 % : 2 MAX.
Sodium Bicarbonate of the above chemical composition should be treated with Magnesium Stearate, Mg (C18H36O2)2, to enhance the flow properties of the product.
PARTICLE SIZE: Pre‐milled with a typical fine size of 30 ‐ 40μm ( Fine Particle 0.03 mm to 0.04 mm )
STANDARD SPECIFICATION:
Methylene blue value G/100g min 15
Moisture as packed % max 5
Mesh size US sieve Wet Seive
> 40 (0.425 mm) % max 0
> 70 (0.212 mm) % max Trace
< 200 (0.075 mm) % min 85
Surface area m2g‐1 850
Iodine number Mg g‐1 min 800
Bulk density g cm‐3 0.45
Dust explosion class St1
Smoulder temperature >450c
Appearance : Acidic Blend liquid; mixes with water
pH : Acidic
Specific gravity : 1.05 - 1.1
Solubility in water : miscible
SPECIFICATION FOR SILICA GEL INDICATING (BLUE) / NON INDICATING (WHITE):
| Loss on drying : | Not more that 5% mass |
| Absorption Capacity : | 27% min on the basis of mass |
| PH : | 3.5 to 8. |
| Chlorides : | 0.05% by mass max |
| Cobalt (as CoCl2) : | 0.4 by mass max |
| Ammonium compounds (as NaH3): | 0.5% by mass max |
| Sulphates (Na2SO4) : | 0.5% by mass max |
| Packing: |
25 / 50 kgs M S drum (Smaller packing available). |
Other Details:
Moisture content: 10-12%
Ash content at 85°c: 4-6%
Tannin content: 50-60%
Specific gravity at 20°C: 1.54 g/cc
Bulk Density: 0.71 gms/ml
Solubility in water: 800 g/liter
Viscosity mPa.s at 30°C-400g/l solution: 20 pass
Reddish brown color
High tannin content
Excellent tanning properties
Uniform quality
Not dusty powerful astringent
Easily soluble in cold water
Product name:Polyacrylamide
Mf:(C3H5NO)n
CAS NO.:9003-05-8
EINECS No.:201-173-7
Other name:Polyacrylamide absorbent Gel; Polyacrylamide solution; Acrylamide resin ,pam/cpam/apam/polyacrylamide/cationic polyacryamide/anionic polyacrylamide.;
Acrylamide resin (high M.Wt.); Acrylamide gel solution; Polyacrylamide,hydrolyzed; Polyacrylamide; PAM
Appearance:white powder or granule
Polyacrylamide is, simply called PAM, a water- soluble high polymer and widely used in petroleum, paper-making, metallurgical, textile, chemical and environment protection fields. There are three categories of anionic, cationic and non-ionic type.
Polyacrylamide according to different uses and users of the product performance requirements can choose to use different molecular weight.
| PRODUCT NAME | : | METHYLALCOHOL |
| CAS number | : | 67-56-1 |
| UN number | : | 1230 |
| Formula | : | CH3OH |
| Odour | : | CHARACTERISTIC |
| Solubility in water | : | COMPLETE |
| Density | : | 0.792 at 20 oC |
| Boiling point | : | 65 oC |
| Melting point | : | -94 oC |
| Viscosity | : | 0.62 cp at 15oC |
| Flashpoint | : | 12 oC |
| Explosive limits | : | 5.5 – 37 Vol% |
| Vapour pressure | : | 127 mbar at 20 oC |
| Skin absorption/irritation | : | YES |
| TLV Country NL Year 1995 | : | 200 S ppm 260 S mg/m3 |
| Pollution category 1994 | : | D |
