Products Grid | Page 49 | Marine Chemicals,Tank Cleaning Chemicals,Water Chemicals Products,Cooling Water Treatment Chemicals

Product Short Description: Chlorine contains Stable if Stored in room temperature

Product Technical Specification:

Physical state: Solid

Colour: White

Odour: Chlorine

Molecular Formula: Ca(OCl)2

Solubility: Soluble in water.

Specific Gravity: 2.35

Relative Vapour Density (air=1): Not available

Vapour Pressure (20 °C): Not available

Flash Point (°C): Not available

Flammability Limits (%): Not available

Autoignition Temperature (°C): Not available

% Volatile by Weight: Not available

Solubility in water (g/L): Not available

Melting Point/Range (°C): Not available

Decomposition Point (°C): ca. 180

pH: Not available

Remarks:

In accordance with the latest EEC Council directives this product is not subjected to any recommendation.
R8            :      Contact with a flammable substance may cause fire
R22          :      Harmful if swallowed
R31    :      Contact with acids liberates toxic gas
R34          :      Causes burns
R36/37/38 :      Irritating to the eyes, respiratory system and to the skin
S2            :      Keep out of reach of children
S23          :      Do not breathe gas, fumes, vapor or spray
S24/25   :      Avoid contact with skin and eyes
S26/28       :     In case of contact with eyes or skin, rinse immediately with plenty of water for at least 15 minutes
                         and seek medical advice
S36/37/39 :      Wear suitable protective clothing, gloves and eye / face protection
S45    :      In case of accident or if you feel unwell, seek medical advice immediately (show the label if possible)

Storage :

* Keep in a Cool, Dry & Dark Place and away from Moisture, Heat & Skin.
* Keep the Container Tightly Closed after use.
* Product is highly Hygroscopic.
* Chlorine contains Stable if Stored in room temperature and may reduce depending on storage Conditions and on exposure to light & Moisture.
* Tablet are not for Swallow & Oral Use.

Images:

Get MSDS

Get Technical Bulletin

Connect On Whats App

Hydro Testing Corrosion Inhibitor

Product Short Description: Hydro-testing corrosion protection for Pipeline, Tank contains corrosion inhibitor, oxygen scavenger and biocide

Product Technical Specification:

Form	Liquid
Colour	Colourless to slightly Yellow
Odour	Sharp
Flash Point	> 100 degree C
Density	1.05-1.11 g/cm3 (25 degree C)
pH	3 - 7

Non-Flammable

Safe Plant Handling
Low Odor
Provides corrosion protection in the liquid and the vapor phase
When used in hydrostatic testing the product provides protection in liquids below, above and at the liquid levels. Protection of recessed and hard to reach areas. Complicated valves and the interior surfaces of piping and equipment, which are often difficult or impossible to reach, are protected with true Vapor Corrosion Inhibitor action. Can be applied for hydrotest solution, metalworking fluids, coatings, adhesives and water treatment formulations.

Remarks:

Hydro Testing Corrosion Inhibitor RXSOL 4000 is a cocktail of water soluble chemicals designed to protect pipelines from corrosion during hydrostatic testing and mothball operations. Hydro Testing Corrosion Inhibitor RXSOL 4000 incorporates oxygen scavenger to rapidly remove oxygen, biocide to prevent Microbial Influenced Corrosion (MIC), together with a film forming corrosion inhibitor to combat acid (low pH) corrosion. Hydro Testing Corrosion Inhibitor RXSOL 4000 represents a single stage treatment chemical treatment, for hydrotest and mothball operations. Hydro Testing Corrosion Inhibitor RXSOL 4000 is a completely soluble product in fresh water, seawater and in most oilfield brine solutions. It is, therefore, suitable for use in water injection systems (which have no mechanical deaeration), hydrotest and mothball operations, and as a packer fluid. Hydro Testing Corrosion Inhibitor RXSOL 4000 has been used in a large number of major projects in the North Sea, Latin America and South East Asia.

Risk of serious damage to eyes. In case of contact with eyes, rinse immediately with plenty of water & seek medical advice. Wear suitable gloves and eye / face protection

Images:

Get MSDS

Get Technical Bulletin

Connect On Whats App

Corrosion Inhibiting Admixture CIA 222

Product Short Description: Corrosion Inhibiting Admixture CIA 222 admixture is a state-of-the-art corrosioninhibiting admixture formulated to inhibit the corrosion of steel in reinforced concrete

Product Technical Specification:

Performance Characteristics

Plastic Properties: The plastic properties of concrete are not significantly affected by the use of RXSOL CIA 222. However, a higher than normal dosage of air-entraining admixture may be required to achieve desired air contents.

Hardened Properties: Depending on the ingredients and proportions of a concrete mixture, a decrease in compressive strength may be experienced with RXSOL CIA 222 typically in the range of 5 to 10 percent. Please consult your local sales representative for recommended concrete mixture adjustments prior to the use of RXSOL CIA 222 admixture. Other hardened properties of concrete are not significantly affected by the use of RXSOL CIA 222.

Slump and Temperature Development: RXSOL CIA 222 has no effect on slump or the temperature development profile of concrete.

Concrete-Steel Bond Strength: Concrete to steel bond strength is not affected by RXSOL CIA 222.

Remarks:

Images:

Get MSDS

Get Technical Bulletin

Connect On Whats App

FERRO IOD CLEAN

Product Short Description: FERRO IOD CLEAN removes, dissolves and disperses iron oxide deposits from diesel cooling water systems while providing a temporary passivating film to protect the base metal from corrosion.

Product Technical Specification:

TYPICAL PROPERTIES

Appearance	:	Light yellow liquid
Specific Gravity @25° C	:	1.14
Flash Point	:	None
Freeze Point	:	-8° C
Water Solubility	:	Completely Soluble

Remarks:

Images:

EDTA Solution 0.1 M , 500 ml

Product Short Description: EDTA

Product Technical Specification:

Standardized at 25°C against chemicals whose certification is traceable to NIST.
Formula: C₁₀H₁₄N₂Na₂O₈·2H₂O
MW: 372.24 g/mol
Melting Point: 255 °C
Storage Temperature: Ambient
CAS Number: 6381-92-6
EINECS: 205-358-3

Remarks:

Images:

Sodium Lauryl Sulfate Powder

Product Short Description: Sodium lauryl sulfate (SLS) is an anionic surface active agent commonly used in cosmetics.

Product Technical Specification:

CAS NO.	151-21-3
EINECS NO.	205-788-1
FORMULA	CH3(CH2)11OSO3Na
MOL WT.	290 - 310

Appearance	White Powder
Active Matter %	95 Min
pH (1% Aqueous Solution)	8.5 - 10.5
Sodium Sulphate %	4.0 Max
Sodium Chloride %	0 .5 Max
Un-Sulfated Matter %	2.0 Max
Moisture %	2.0 Max

Remarks:

Images:

Methyl Diethanolamine MDEA

Product Short Description: A colorless to yellow liquid tertiary amine compound with an ammonia-like odor. It is completely soluble in water.

Product Technical Specification:

Property	Value
Property	Value
Physical state	Liquid
Color	Colorless
Odor	Ammonia-like
Density	1.04 g/cm @ 20°C
Melting / boiling point	-21.3 / 243.3 °C
Explosive properties	No data available
Self-ignition temperature	280 °C
Vapor pressure	0.1 hPa @ 54.8°C
Mol weight	119.16 g/mol
Water solubility	Soluble
Flash point	138°C


Molecular Formula	C5H13NO2
Molecular Weight	119.16 g/mol
Autoignition Temperature	280 °C
Critical Pressure	37 000 hPa
Critical Temperature	404 °C
Dissociation constant	25°C 8.68
Freezing Point	21.3 °C
Heat Capacity	20°C 1.72 kJ/kg·K
Heat of Formation	91 649 kJ/kmol
Heat of Vaporization	418.7 kJ/kg
Octanol-water partition coefficient, log Pow (pH 10.5; at 23°C)	1.16
Refractive Index	20°C 1.4642
Vapor Density	(air = 1) 4
Vapor Pressure	20°C 0.0031 hPa
Viscosity	20°C 99.05 mm2

Remarks:

Future & Benefit :

Degradation resistance
High solvent loading
Low capex and opex
Low corrosiveness
Low energy requirements
Low solvent make-up Selectivity

Compatibility and Solubility:

Methyl Diethanolamine is miscible in all proportions with water. It is also soluble in most organic solvents. Chemically it acts as both a tertiary amine and an alcohol. Neutralisation of the amino function by acids results in salt formation. The product is stable at elevated temperatures but must be kept away from oxidants and acids.

Amine Gas Treatment Unit system simulation:

Based upon feed gas conditions, the installation design and type of amine, unit performance can be predicted and optimized. The simulation output and reporting are tailored towards your needs and focus on the issues at hand. These simulations combined with our application experience allow us to provide you with feedback on how to improve the amine gas treatment unit operations (financial, operational and quality) and to tailor our amine formulations to maximize performance, such as energy reduction and reduced amine consumption.

Technical support:

Technical support is provided to all RXSOL users. Our experienced team of engineers is available around the clock to respond to your questions. On-site troubleshooting by an experienced engineer can also be arranged. Rxsol Chemo Pharma International can assist you with root cause analysis and operational recommendations for issues such as off- spec treated gas, foaming, high amine losses, high energy consumption, under capacity, corrosion etc.

Amine analysis:

Detailed chemical analysis of your amine solution is a key tool to determine the overall quality of the system and identify the root cause for problems such as foaming, corrosion, off spec product etc.RXSOL’s lab, highly experienced in amine analysis and interpretation, is at your disposal. Analysis of lean amine samples includes (a.o): sample appearance, physical-chemical properties, determination of free and bonded amine, acid gas loading foam test, metal scan etc. The results of the analysis are interpreted by our specialist team and the necessary recommendations are provided. The frequency, content and reporting of the analyses is customized towards your needs. Full results are typically available within 7 working days after receipt of the samples.

Sample kits :

Sample shipping kits and detailed analytical procedures are available to our customers upon request.

Packaging

Bulk
Plastic drums (230 kg net)
IBC containers (1150 kg net)

Storage:

Copper and copper alloys should be avoided.For bulk storage a nitrogen atmosphere is necessary to prevent the absorption of moisture and discoloration.

Images:

Drilling Foam RXSOL

Product Short Description: RXSOL DRILLING FOAM RX is a proprietary mixture of biodegradable surfactants and foam stabilizers which is designed to produce high performance foam using fresh, brackish and sea water for various drilling operations.

Product Technical Specification:

Appearance	Liquid
State	Viscous liquid
Colour	Clear to opaque
pH at 20oC±1°C	6.5 - 8.5
Specific Gravity at 20°C+1°C	1.0 ± 1.05
Pour point	(-) 5°C

Remarks:

Images:

Search form

Chlorine Tablets Calcium Base

Hydro Testing Corrosion Inhibitor

Corrosion Inhibiting Admixture CIA 222

FERRO IOD CLEAN

RXSOL CLEANER

EDTA Solution 0.1 M , 500 ml

Air Operated Double Diaphragm Pump

Chemical Discharge Hose 50 Meter

Sodium Lauryl Sulfate Powder

MARICLEAN HD 340

Methyl Diethanolamine MDEA

Drilling Foam RXSOL

HAVE A QUESTION?

Ask a question - WebForm Inline

LiveChat