Ice Machine Cleaning Liquid Nickel Safe

Size:

Color:

Product Short Description: Nickel Safe Ice Machine Cleaner is Suitable to clean deposits of black mildew by killing bacteria & spores as well as mineral scale deposits.
Product Technical Specification:
 
Appreance : Clear Liquid
Odour : Neutral
pH : <1.0
Soecific Gravity : More than 1
Viscocity : 25 cps
Boiling Point : 108 °C
Flash Point : Not Applicable
Solubility in Water : 100 % in any ratio
 



How to Cleane Ice Maker Machine?

1st for Ice Maker Component Cleaning: Dip BATH process.
Takes 100 ml of  RXSOL Ice Machine Cleaner for 3 Ltr  of warm water in plastic container and immerse components in solution. Soak the components until they are free of deposits; for stubborn or thick deposits use a soft brush to help the dissolving action

2nd for Circulation system Cleaning: Recirculation Method.
Use 100 to 150 ml of RXSOL Ice Machine Cleaner in 3 Ltr water in the machine. Allow cleaning solution to circulate for up to 10-20 minutes; it may be necessary to recirculate the solution for longer than 10 minutes to remove heavier and thicker scale deposits. Be sure all distribution and weep holes are clear.

Remarks:

How to Cleane Ice Maker Machine?

1st for Ice Maker Component Cleaning: Dip BATH process.
Takes 100 ml of  RXSOL Ice Machine Cleaner for 3 Ltr  of warm water in plastic container and immerse components in solution. Soak the components until they are free of deposits; for stubborn or thick deposits use a soft brush to help the dissolving action

2nd for Circulation system Cleaning: Recirculation Method.
Use 100 to 150 ml of RXSOL Ice Machine Cleaner in 3 Ltr water in the machine. Allow cleaning solution to circulate for up to 10-20 minutes; it may be necessary to recirculate the solution for longer than 10 minutes to remove heavier and thicker scale deposits. Be sure all distribution and weep holes are clear.

How Scale formed in Ice Maker Machine?

Dissolved Mineral or presence of mineral present in water is cause of SCALE FORMATION in ICE MAKER. Water tries to freeze in its pure state, while mineral present in water getting precipitate. As the cycle continues and more water is made into ice, the minerals over concentrate and eventually precipitate as a lime scale deposit.

Why Regular Cleaning of SCALE is essential from Ice Maker?
 

Continiue deposition of minearal scale, obstracting water flow from holes, which causes reduction of ICE HARVEST. Extra deposition of scale makes ICE MAKER jam eventually the machine will shut down. This is reason why Once the machine is scaled up, it must be cleaned.
Images: Alt


Ice Machine Descalling Chemical

Size:

Color:

Product Short Description: RXSOL Cleaner removes calcium and mineral deposits from ice machines, keeping the equipment running smoothly and efficiently.
Product Technical Specification:

 

Appreance : Clear Liquid
Odour : Neutral
pH : <1.0
Soecific Gravity : 1.3-1.1.35
Viscocity : 25 cps
Boiling Point : 108 °C
Flash Point : Not Applicable
Solubility in Water : 100 % in any ratio
 
Remarks:
Images: Alt


Acid Shield Metal Guard Acid Corrosion Inhibitor

Size:

Color:

Product Short Description: The addition of Acid Shield Metal Guard Corrosion Inhibitor, inhibitors to hydrochloric acid solution provides maximum protection for equipment during,The removal of lime deposits or water scale from power plant boilers and piping systems and from evaporating equi
Product Technical Specification:
Remarks:
Images: Alt


Pure Treat BWT

Size:

Color:

Product Short Description: A POWERFULL corrosive preventive to prevent corrosion from seawater in ship BALLAST TANK. It contains organic and inorganic inhibitors.
Product Technical Specification:
Corroision Inhibitor for METAL appearance Clear to light amber liquid. Its Density is 1.38 kg/l and pH Value < 1.0

Technical Data

Form        

 Liquid
Colour Clear to Light Amber
Density 1.38
pH <1.0
Freezing Point -45°C
Compatibility Materials N, Hypalon, Neoprene, Polyethylene, Polypropylene, Polyurethane, PVC, Teflon, Vinyl, Viton.
Not compatible Aluminium, Brass, Carbon Steel, Nickel, Stainless Steel 304/316, Plasite 4005/6000 and 7122
Water solubility Soluble
Remarks:

Corroision Inhibitor for METAL is a liquid film-forming corrosion inhibitor. For use in ballast tanks, bilges, voids, cofferdams and barges. It  is a blend of organic and inorganic inhibitors. It contains no chromates and is completely soluble in sea water.

Images: Alt


Corrosion Inhibitor for Closed Open Cooling System

Size:

Color:

Product Short Description: RXSOL-40-4028 creates an insoluble polymeric surface complex on copper and its alloys, and also reacts with copper in solution. RXSOL-40-4028 also works synergistically with other inhibitors to effectively control the corrosion of steel and aluminium in the system.
Product Technical Specification:
Remarks:
Images: Alt


SODIUM FORMATE

Size:

Color:

Product Short Description: Sodium Formate is a white crystalline material. It is used in the production of sodium hydrosulphite/dithionite, a bleching agent for pulp and paper.
Product Technical Specification:
Remarks:
Images: Alt


Alkalinity Reducer

Size:

Color:

Product Short Description: Alkalinity controller-Reducer to Maintains pH in Boiler Water. Concentrated liquid neutralising agent for corrosion control in condensate and feed water systems, contain blends of low, medium and high volatility amines that provide great protection and neutralization of acidic gases, such as CO2
Product Technical Specification:

We carry a complete line of condensate treatment chemicals.  Condensate treatment chemicals are used to increase the condensate pH, thus reducing corrosion to the entire boiler steam system.  The most common product is a tri-blend amine of cyclohexylamine, morpholine, and diethylaminoethanol (DEAE) neutralizing amines, although we do have standard RXSOL products or we can custom blend to your needs.
RXSOL-50-5005-DCM1          10% DEAE, 10% Cyclo, 10% Morpholine   
RXSOL-50-5005-DCM2          20% DEAE, 20% Cyclo, 20% Morpholine   
RXSOL-50-5005-C                  20% Cyclohexylamine    
RXSOL-50-5005-D                  20% DEAE    
RXSOL-50-5005-M                  20% Morpholine   
RXSOL-50-5005-C5                50% Cyclohexylamine    
RXSOL-50-5005-D                  50% DEAE  
RXSOL-50-5005-M5                50% Morpholine    
  

PRODUCT INTRODUCTION
Pure anisole or methoxybenzene, is an organic compound. CAS NO: 100-66-3
HANDLING & STORAGE
Keep away from heat and sources of ignition.
Store in a sealed condition at ambient temperature or below. Keep containers in tightly closed condition.
Use proper PPE during handling.
PRODUCT APPLICATION
Used as solvent, as an intermediate in making of dyes, pharmaceuticals, fragrances and as an insect pheromones.
PROPERTIES
Appearance
Clear Colorless Liquid
Purity ( by GC ) , %
99.8 Min
Specific Gravity @25°C
0.9995 ± 0.05
Moisture (by KF) , %
0.3 Max
PACKAGING
Packed in drums or in ISO TANKS on request.

 
 

Remarks:

RXSOL-50-5005-025 alkaline and the vapors are irritating to eyes and lungs. Avoid contact with eyes and skin. Do not take internally. Observe safety regulations wear Goggles, PVC gloves and Apron when handling Provide ample ventilation Avoid contact with skin in case of contacts wash with cupious amount of water immediately. If eyes are splashed give immediate and prolonged irrigation with clean running water and obtain medical attention.

Not for internal use :-
If swallowed do not induce vomiting give plenty of water or milk and call a doctor immediately.

Packing. GENERAL REMARKS:-Do not store  RXSOL-50-5005-025  near a heating equipment.

Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


Corrosion Inhibitor FILMMAX

Size:

Color:

Product Short Description: Concentrated liquid neutralising agent for corrosion control in toping overhead system of crude distillation, contains blends of low, medium and high volatility amines that provide great protection and neutralization of acids and acidic gases, such as CO2
Product Technical Specification:

We carry a complete line of condensate treatment chemicals.  Condensate treatment chemicals are used to increase the condensate pH, thus reducing corrosion to the entire boiler steam system.  The most common product is a tri-blend amine of cyclohexylamine, morpholine, and diethylaminoethanol (DEAE) neutralizing amines, although we do have standard RXSOL products or we can custom blend to your needs.
RXSOL-50-5005-DCM1          10% DEAE, 10% Cyclo, 10% Morpholine   
RXSOL-50-5005-DCM2          20% DEAE, 20% Cyclo, 20% Morpholine   
RXSOL-50-5005-C                  20% Cyclohexylamine    
RXSOL-50-5005-D                  20% DEAE    
RXSOL-50-5005-M                  20% Morpholine   
RXSOL-50-5005-C5                50% Cyclohexylamine    
RXSOL-50-5005-D                  50% DEAE  
RXSOL-50-5005-M5                50% Morpholine    
  

PRODUCT INTRODUCTION
Pure anisole or methoxybenzene, is an organic compound. CAS NO: 100-66-3
HANDLING & STORAGE
Keep away from heat and sources of ignition.
Store in a sealed condition at ambient temperature or below. Keep containers in tightly closed condition.
Use proper PPE during handling.
PRODUCT APPLICATION
Used as solvent, as an intermediate in making of dyes, pharmaceuticals, fragrances and as an insect pheromones.
PROPERTIES
Appearance
Clear Colorless Liquid
Purity ( by GC ) , %
99.8 Min
Specific Gravity @25°C
0.9995 ± 0.05
Moisture (by KF) , %
0.3 Max
PACKAGING
Packed in drums or in ISO TANKS on request.

 
 

Remarks:

RXSOL-50-5005-025 alkaline and the vapors are irritating to eyes and lungs. Avoid contact with eyes and skin. Do not take internally. Observe safety regulations wear Goggles, PVC gloves and Apron when handling Provide ample ventilation Avoid contact with skin in case of contacts wash with cupious amount of water immediately. If eyes are splashed give immediate and prolonged irrigation with clean running water and obtain medical attention.

Not for internal use :-
If swallowed do not induce vomiting give plenty of water or milk and call a doctor immediately.

Packing. GENERAL REMARKS:-Do not store  RXSOL-50-5005-025  near a heating equipment.

Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


Sodium Metal

Size:

Color:

Product Short Description: Sodium is used as a heat exchanger in some reactors and also as a reagent in the chemicals industry.
Product Technical Specification:
Remarks:
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


Zinc Iodide

Size:

Color:

Product Short Description: Zinc Iodide is a chemical compound made of zinc and iodine having a molecular formula ZnI2.
Product Technical Specification:

 

Appearance                 White Powder
Chemical Formula ZnI2
Melting Point 446 °C
Boiling Point 1,150 °C
Density 4.74 g/cm³
Molar Mass 319.22 g/mol
pH 5,6 at 50 g/l at 20 °C
Water solubility 4.500 g/l at 20 °C

 

Remarks:
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


Formic Acid 85 Percent

Size:

Color:

Product Short Description: Formic acid use as a preservative antibacterial agent cleaning agent and coagulant in rubber industries.
Product Technical Specification:
Formic acid is sprayed on fresh hay ( grass that has been cut and dried for use as animal food )in order to delay or halt decay, thereby allowing the feed a longer survival period. This process is of particular importance in the preservation of winter cattle feed. In poultry farming,


In addition, the use of formic acid on hay feed may reduce the total milk fat when given to milk cows.
Remarks:
The many industrial uses of formic acid include the following:
 
 A reducing and decalcifying agent in dyeing and finishing of textiles
 An agent for plumping and dehairing hides in leather tanning
 A solution for electroplating;
 A rubber coagulating agent in the creation of latex rubber and in regenerating old rubber
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


Corrosion Inhibitor High Temp

Size:

Color:

Product Short Description: It is composed of chelating agent, dispersant, pretreatment filming and surfactant.
Product Technical Specification:

Specification:

Appearance                        Amber transparent liquid
Solid content,%                  40.0 min
 

Remarks:

RXSOL-81-8154-220 Corrosion Inhibitor High Temp main characteristic feature is this product doesn't have non-emulsifying tendencies.

Images: Alt

HAVE A QUESTION?

Ask your questions away and let our dedicated customer service help you look through our FAQs to get your questions answered!

stock-clearance.png