Your shopping cart is empty.
RXSOL-20-2004-025 is a mixture of emulsifiers, surfactants, corrosion inhibitors and rust preventives, being non - caustic very gentle on hand & ideal for cleaning walls wood works, metal and other areas. Prevents the corrosion of metal such as zinc, aluminium, copper, brass and tin. Specialized for ship cargo, tank cleaning and gas freeing of tanks.
| Form | Liquid |
| Colour | Colourless to slightly Yellow |
| Odour | Sharp |
| Flash Point | > 100 degree C |
| Density | 1.05-1.11 g/cm3 (25C) |
| pH |
3 - 7 |
Non-Flammable
Safe Plant Handling
Low Odor
Provides corrosion protection in the liquid and the vapor phase
When used in hydrostatic testing the product provides protection in liquids below, above and at the liquid levels. Protection of recessed and hard to reach areas. Complicated valves and the interior surfaces of piping and equipment, which are often difficult or impossible to reach, are protected with true Vapor Corrosion Inhibitor action. Can be applied for hydrotest solution, metalworking fluids, coatings, adhesives and water treatment formulations.
Risk of serious damage to eyes. In case of contact with eyes, rinse immediately with plenty of water & seek medical advice. Wear suitable gloves and eye / face protection
For degreasing and removal of residues of minerals oil, coal stain and soot from the surface.
Safety Phrases
S-2 Keep out of the reach of children.
S-26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S-36/37/39 Wear suitable protective clothing, gloves and eye/face protection.
S-45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).
|
Physical state and appearance |
Solid |
|
Odor |
Odorless |
|
Taste |
Bitter. Saline. (Strong.) |
|
Molecular Weight |
166 g/mole |
|
Color |
White |
|
pH (1% soln/water) |
Not available |
|
Boiling Point |
1330°C (2426°F) |
|
Melting Point |
681°C (1257.8°F) |
|
Critical Temperature |
Not available |
|
Specific Gravity |
3.1 (Water = 1) |
|
Vapor Pressure |
Not applicable |
|
Vapor Density |
Not available |
|
Volatility |
Not available |
|
Odor Threshold |
Not available |
|
Water/Oil Dist. Coeff |
Not available |
|
Ionicity (in Water) |
Not available |
|
Dispersion Properties |
See solubility in water, methanol, acetone |
|
Solubility |
Easily soluble in cold water, hot water. Soluble in methanol. Partially soluble in acetone |
Other Valuable grade :::
Nu-look Tire Dressing TYRE ( http://rxmarine.com/nu-look-tire-dressing ) Part No. RXSOL-41-4107-025
Tyre Polish -All Vinyl Conditoner ( http://rxmarine.com/condition-all-vinyl-conditoner ) Part No. RXSOL-41-4108-025
|
Light Duty |
1 part cleaner / 35 parts water |
| Medium Duty | 1 part cleaner / 25 parts water |
| Heavy Duty | 1 part cleaner / 15 parts water |
| Extra Heavy Duty | 1 part cleaner / 1-5 parts water |
When using this product be sure to let foam act long enough to penetrate and loosen soil and grime.
Neutral cleaner to avoid chemical reaction of oil and Fat which is causing grease layer on the tank surface. While Alkaline cleaner reacts with fatty acid present in oil and fat and causing the formation of sticky greasy mass on the tank surface this is the reason why we should avoid uses of any alkaline materials for removal of vegetable, animal and mineral oils etc... HCF Neutral product based on highly efficient dissolving and low foaming nonionic surface-active agents.specialized for the removal of vegetable, animal and mineral oils as well as fats.
|
Spec Item |
35%H2O2 |
50%H2O2 |
60%H2O2 |
|
pH |
1.20~2.50 |
1.20~2.50 |
1.20~2.50 |
|
Purity wt% |
35~36 |
50~51 |
58~60 |
|
Specific Gravity 20/4℃ |
1.130min |
1.19min |
1.195min |
|
Free Acid as h2so4 wt% |
0.05max |
0.05max |
0.05max |
|
Residual wt% |
0.20max |
0.20max |
0.20max |
|
Stability % |
97.0min |
97.0min |
97.0min |
Keep locked up.. Keep container dry. Keep away from heat. Keep away from sources of ignition. Keep away from combustible material.. Do not ingest. Do not breathe gas/fumes/ vapor/spray. Never add water to this product. In case of insufficient ventilation, wear suitable respiratory equipment. If ingested, seek medical advice immediately and show the container or the label. Avoid contact with skin and eyes. Keep away from incompatibles such as oxidizing agents, reducing agents, combustible materials, organic materials, metals, acids, alkalis
Corrosion Scale Inhibitor for Open Closed Cooling systems ECO is a very efficient dispersant for hardness-salts and metallic-oxides.
Corrosion Scale Inhibitor for Open Closed Cooling systems ECO is also a very efficient corrosion-inhibitor.
Corrosion Scale Inhibitor for Open Closed Cooling systems ECO contains sequestrants, anionic polymers and wetting-agents.
Corrosion Scale Inhibitor for Open Closed Cooling systems ECO has been developed to avoid or remove deposits composed of calcium carbonate, calcium sulphate, magnesium hydroxide, iron oxide, insoluble phosphates and silicates.
Corrosion Scale Inhibitor for Open Closed Cooling systems ECO may be applied in closed, open and once-through cooling-water systems, desalinisation plants, phosphoric acid plant and all other systems where above mentioned deposits will occur.
