Your shopping cart is empty.
| Appearance | Clear Solution |
| Odour | Characteristic |
| pH | 5-6 |
| Density | >1.2 |
CHARACTERISTIC :
1 part concentrate to: Freezing Point °C
1 part water…………………..-45
2 parts water………………….-25
3 parts water………………….-18
4 parts water………………….-12
5 parts water………………….-10
10 parts water…………………-3
SAFETY:
Danger: POISON - Contains Methyl Alcohol (Methanol). May be fatal or cause blindness if swallowed. Vapor harmful. Keep out of reach of children. Cannot be made non poisonous. Avoid contact with eyes. Use only in a well ventilated area. Keep away from heat and open flame. Do not store in open or unlabeled containers. DANGER: Concentrate is flammable.
RXSOL-31-3021-010 is a dry organic chlorine in tablet form giving a high available chlorine base, ensuring an effective sterilising and disinfecting action in slow release form. 200g tablet with 90-92% available chlorine. For chlorination of swimming pools, sewage and waste water.Standard tablet size: 75 mm diameter - 25 mm H. For swimming pool water treatment: 4 large tablets every 100 m3 of water to be put in skimmers or in floating trays. For waste water treatment, fill the chlorinating pipes until 2 to 5 PPM of residual active chlorine are obtained. If below 2 PPM, use both chlorinating pipes. Assess residual chlorine level with the appropriate TEST KIT supplied by Rx Marine International Rxsol Chlorine Test kit.
Application :
Purification of Drinking Water.
Treatment for Seawage.
Treatment for Swiming Pool
Dose:
The tablet is dosed to the water supply tank preferably suspended away from the fabric of the tank. The tablets should not be allowed to rest on the bottom of metal tanks. Being in tablet form this is a safer method of administering chlorine than the usual liquid preparations. When used as part of a planned programme of protection it will assist in control of problems associated with such areas as bacterial and organic foulingincluding legionnaires disease.
Dose Rate:
Rates will be determined by the extent of current problems. An initial dose will be required to give a free residual chlorine reserve of 5-50ppm for a minimum of 1 hour. Thereafter a reserve of 0.5-2.0ppm is normally sufficient. Also available as rapid dissolving (Bechlor 126RD) 1 tablet will give 50ppm chlorine in 3.6m3 water.
SPECIFICATION
| Active chlorine % | ≥ 90.0 |
| Chemical Formula | C 3 O 3 N 3 CL 3 |
| Molecular Weight | 232.41 |
| Molecular formula | 143.0 |
| Melting Point | 235 |
| UN No. | 2468 |
| Class | 5.1 |
| CAS No. | 87-90-1 |
| Moisture% | ≤ 0.5 |
| PH (1% solution) | 2.7-3.3 |
| Appearance | tablet (200g) |
| Packing | 10 Kgs |
| Store | Store in cool, dry, well ventilated area. |
Physical Proeprties :
| Appearance | : Clear or slightly turbid aqueous solution, colorless or slightly yellow in color |
| Density (kg / m 3 ) | :1020 |
| pH | : 8.5 - 12.5 |
| Flash Point | : None |
| Freezing Point | : <+ 2 0 C |
| Solubility in Water |
: Cpmpletely soluble in water |
Content of Rxsol Ferroxyl Test Kit –
Equipment & Reagent :
The principle of Ferroxyl test kit :
Free iron cannot be seen on the surfaces of contaminated parts. Therefore, it must be converted into a visible form.
Ferroxyl Test Kit helps to Identify transition Iron metal ions to blue colour spot.
The transition of Iron metals to form blue coloured compounds with TK F1 and TK F2.
colourless solution → blue precipitate
|
Spec Item |
35%H2O2 |
50%H2O2 |
60%H2O2 |
|
pH |
1.20~2.50 |
1.20~2.50 |
1.20~2.50 |
|
Purity wt% |
35~36 |
50~51 |
58~60 |
|
Specific Gravity 20/4℃ |
1.130min |
1.19min |
1.195min |
|
Free Acid as h2so4 wt% |
0.05max |
0.05max |
0.05max |
|
Residual wt% |
0.20max |
0.20max |
0.20max |
|
Stability % |
97.0min |
97.0min |
97.0min |
Keep locked up.. Keep container dry. Keep away from heat. Keep away from sources of ignition. Keep away from combustible material.. Do not ingest. Do not breathe gas/fumes/ vapor/spray. Never add water to this product. In case of insufficient ventilation, wear suitable respiratory equipment. If ingested, seek medical advice immediately and show the container or the label. Avoid contact with skin and eyes. Keep away from incompatibles such as oxidizing agents, reducing agents, combustible materials, organic materials, metals, acids, alkalis
Corrosion Scale Inhibitor for Open Closed Cooling systems ECO is a very efficient dispersant for hardness-salts and metallic-oxides.
Corrosion Scale Inhibitor for Open Closed Cooling systems ECO is also a very efficient corrosion-inhibitor.
Corrosion Scale Inhibitor for Open Closed Cooling systems ECO contains sequestrants, anionic polymers and wetting-agents.
Corrosion Scale Inhibitor for Open Closed Cooling systems ECO has been developed to avoid or remove deposits composed of calcium carbonate, calcium sulphate, magnesium hydroxide, iron oxide, insoluble phosphates and silicates.
Corrosion Scale Inhibitor for Open Closed Cooling systems ECO may be applied in closed, open and once-through cooling-water systems, desalinisation plants, phosphoric acid plant and all other systems where above mentioned deposits will occur.
