Cement Plug Remover 7000

Size:

Color:

Product Short Description: Highly concentrated and powerful penetrating agents materials which is effectively react with cement to loosen the bonding strength . Best results can obtain on dry surface of cement. RXSOL'S R & D has developed this molecular cement dissolver as an alt
Product Technical Specification:

ACTIVE MATTER         : 98-100 %

WHY RXSOL-22-2202 is better ?

Biodegradable & non flammable , Economical very cost effective
Non-hazardous
Non-fuming
Safe for paint, chrome, aluminum, glass, rubber, plastic, brass & stainless
Dissolves cured cement, concrete, mortar, grout, stucco
Cleans aluminum
Also comes with a foaming spray nozzle
Will not remove rubberized cement
Suitable for the removal of cement deposits and dry stains.
Due to its higher concentration its chemical reaction is very fast.

It's chemical combination meet the requirements of paragraph 1.8.2 of the P&A Standards.
 

Excellent , concentrated and very effective cement remover with powerfull dissolving properties used on cement and bulk carriers.

The hardened concrete is saturated with Back-Set, either with a brush or by spraying. After 15-20 minutes, the area is again saturated with the chemical. The concrete typically begins to soften in 20-30 minutes,and can be rinsed off with water.The amount required for dosage can be obtained BY knowing the deposition composition as well as nature of cement to be removed.5 to 20 % recommended .These are recommended values based on experience. For optimum results dose RXSOL-22-2202-025 directly to the surface .

 

The amount required for dosage can be obtained BY knowing the deposition composition as well as nature of  CEMENT to be removed . 5 to 20 % recommended .These are recommended values based on experience.

For optimum results dose RXSOL-22-2202-025 directly to the surface

Remarks:

Undiluted : In cases where we deal with heavy deposit build–up, CEMENT REMOVER must be applied undiluted.
Diluted : In cases of light deposition, on large surface areas, a solution between 10–40% may be used.

METHOD ::: 
1.For heavy deposition and thick layers  of cement, a concentrated and  stronger cleaner will be necessary to cut through the layers of cement.
2.Use a scraper, metal scrubber or flat head screwdriver to remove as much of the cement as possible.
3.For the remaining cement, apply this chemical 
4.Once the cement loosens, scrub the area with a scrubber until it is all removed from the surface.
5.Rinse the area well with clean water.
6.Clean the area with alkaline soap and water 
7.Flush system completely.

It is highly concentrated and powerful penetrating agents materials which is effectively react with cement to loosen the bonding strength . Best results can obtain on dry surface of cement.  RXSOL'S R & D  has developed this molecular cement dissolver as an alternative to using hazardous acids for concrete removal. Back-Set is a one-of-a-kind formula. It uses an active ingredient found in sugar cane syrup, and is completely biodegradable.

RXSOL-22-2202-025 turned this vulnerability into an opportunity. "Back-Set" safely removes hardened concrete from a variety of difficult to clean surfaces. It break down the ionic bond in portland cement, releasing the cement from any surface to which it has adhered.

Images: Alt


Quicklime

Size:

Color:

Product Short Description: Is an alternate name for the chemical compound known as calcium oxide
Product Technical Specification:
Remarks:
Images: Alt


Chemical Protective Accessories

Size:

Color:

Product Short Description: Chemical Protective Accessories suit boot gloves gogles fullface mask
Product Technical Specification:
Remarks:
Images: Alt


RXSOL ORG 961 Corrosion Preventive

Size:

Color:

Product Short Description: RXSOL ORG 961 is a blend of surfactants, corrosion inhibitors and oil in a petroleum-based solvent
Product Technical Specification:

Physical Properties

Appearance : Clear Liquid
Colour : Straw
Density : 0.80 g/ml @ 20 °C.
Flash point : 38°C minimum
Coverage Area : 20  - 25 m²/litre Approx
 
Remarks:
Images: Alt


Metal Brite

Size:

Color:

Product Short Description: Rust and Metal Tarnish Remover Specially designed for removal of rust from any steel surface area also acts as rust proofing agent before the application of paint or coatings. It is non-flammable. Prevents further rusting.
Product Technical Specification:
Remarks:
Images: Alt


Tall Oil Fatty Acid

Size:

Color:

Product Short Description: Is a low cost unsaturated fatty acid oleic acid and is a source of low boiling point fatty acids widly used in synthetic lubricants industry.
Product Technical Specification:
Remarks:
Images: Alt


Cyanopyridines

Size:

Color:

Product Short Description: Cyanopyridines are chemical compounds used in agriculture as pesticides and herbicides to improve crop protection and yield.
Product Technical Specification:

Cyanopyridines White Crystaline Solid.

Remarks:
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


Acetone Cyanohydrin

Size:

Color:

Product Short Description: 2-hydroxy-2-methylpropanenitrile is a cyanohydrin. Acetone cyanohydrin (ACH) is an organic compound used in the production of acrylic
Product Technical Specification:
 
PRODUCT NAME : ACETONECYANOHYDRIN
CAS number : 75-86-5
UN number : 1541
Formula : (CH3)2COHON
Odour :  
Solubility in water : COMPLETE
Density : 0.932 at 19 oC
Boiling point : 95 oC
Melting point : 20  oC
Viscosity :  
Flashpoint : 74 oC
Explosive limits : 2 – 11 Vol %
Vapour pressure : 1.1 mbar at 20 oC
Skin absorption/irriation : YES
TLV      Country :  
Pollution category      1994 :  A

 

Remarks:
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


Acetone cyanohydrin

Size:

Color:

Product Short Description: 2-hydroxy-2-methylpropanenitrile is a cyanohydrin. Acetone cyanohydrin (ACH) is an organic compound used in the production of acrylic
Product Technical Specification:

 

PRODUCT NAME : ACETONECYANOHYDRIN
CAS number : 75-86-5
UN number : 1541
Formula : (CH3)2COHON
Odour :  
Solubility in water : COMPLETE
Density : 0.932 at 19 oC
Boiling point : 95 oC
Melting point : 20  oC
Viscosity :  
Flashpoint : 74 oC
Explosive limits : 2 – 11 Vol %
Vapour pressure : 1.1 mbar at 20 oC
Skin absorption/irriation : YES
TLV      Country :  
Pollution category      1994 :  A

 

Remarks:
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


MILK POWDER

Size:

Color:

Product Short Description: Is a manufactured dairy product made by evaporating milk to dryness
Product Technical Specification:
Remarks:
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


PYRIDINE

Size:

Color:

Product Short Description: PYRIDINE It is especially suitable for the dehalogenation, where it acts as the base of the elimination reaction and bonds the resulting hydrogen halide to form a pyridinium salt.
Product Technical Specification:

 

PRODUCT NAME           : PYRIDINE
CAS number        : 110-86-1
UN number       : 1282
Formula       : NC4H4CH
Odour             : PUNGENT
Solubility in water       : COMPLETE
Density        : 0.982  at 20 oC
Boiling point              : 115 oC
Melting point           : -42 oC
Viscosity     : 0.97 cp at 20 oC
Flashpoint      : 17oC
Explosive limits       : 1.7 – 10.6 Vol%
Vapour pressure         : 20 mbar at 20 oC
Skin absorption/irritation             : 20 mbar at 20 oC
 TLV       Country  NL             Year  1995        : 5 ppm                  15        mg/m3
Pollution category    1994     : D

 

Remarks:
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


Ferrous Ammonium Sulfate

Size:

Color:

Product Short Description: Is a pale green or blue green powder or sand like solid.
Product Technical Specification:

Formula Weight‎: ‎392.14
Linear Formula‎: ‎Fe(NH4)2(SO4)2·6H2O
Molecular Formula‎: ‎H8FeN2O8S2 · 6 H2O
Assay Percent Range‎: ‎98.5 to 101.5 %

Physical State Crystals
Color Pale green
Odor Odorless
pH 3-5 (5% aqueous solution)
Vapor Pressure No information found
Vapor Density No information found
Evaporation Rate Evaporation Rate
Viscosity No information found
Boiling Point Not available
Freezing/Melting Point 100°C (decomposes)
Decomposition Temperature 100-110°C
Solubility in water 269 g/l @ 20°C
Specific Gravity/Density 1.865
Molecular Formula FeSO4(NH4)2so46H2O
Molecular Weight 392.14
Remarks:

USES

  • Analytical chemistry: Ferrous ammonium sulfate is used as a reductometric standard in titrations that involve ceric, dichromate, and permanganate ions. 
  • Iron plating: Ferrous ammonium sulfate is used in iron plating baths. 
  • Photography: Ferrous ammonium sulfate is used in photography. 
  • Brass coloring: Ferrous ammonium sulfate is used as an ingredient in brass coloring baths. 
  • Pesticides: Ferrous ammonium sulfate can be used in pesticide sprays to help correct iron deficiencies. 
  • Turf: Ferrous ammonium sulfate can be used to improve the color of turf. 
Images: Alt

HAVE A QUESTION?

Ask your questions away and let our dedicated customer service help you look through our FAQs to get your questions answered!

stock-clearance.png