Ethylene Glycol Monostearate

Product Code: RXSOL-15-6012-051

Size:

Color:

Product Short Description: Ethylene glycol monostearate also known as glycol monostearate or glycol stearate is a vegetable derived ester used in personal care and cosmetic products as a pearlizing agent emulsifier stabilizer and thickening agent.
Product Technical Specification:
Remarks:
Images: Alt

Coil and Air Filter Cleaner HD

Product Code: RXSOL-39-3901-025

Size:

Color:

Product Short Description: It is Extra Stron Cleaner containing Surface active agent, corrosion inhibitors, and water conditioners specifically designed for cleaning electronic air filters.
Product Technical Specification:

 

Form         Liquid
State Clear
Odour Fresh
Boiling point and boiling range  0°C
Flash Point Not applicable
Freezing Point 100°C
pH 13.0 - 14.0, 100 %

 

Remarks:

Filter Clean Special HD – Coil Cleaning Procedure

Before Starting:
Ensure the unit and all fans are turned off for safety.


Step 1 – Prepare the Cleaning Solution

  • Mix 1 part Filter Clean Special HD with 5 parts water.

  • Important: Always add water to the sprayer tank first, then add Filter Clean Special HD.
    (add Filter Clean Special HD first, then water.)


Step 2 – Apply the Solution

  • Using a  sprayer, thoroughly spray the cleaning solution on the coil plates.

  • Ensure complete coverage on all surfaces of the plates.


Step 3 – Dwell Time

  • Allow the cleaning solution to remain on the surface for 5–15 minutes to loosen dirt, grease, and residues.


Step 4 – Rinse Thoroughly

  • Rinse off all coil surfaces using a hose or the system’s built-in spray nozzles (if equipped).

  • Use hot water, if available, for enhanced cleaning performance.


Step 5 – Repeat if Necessary

  • For heavily soiled units, repeat Steps 2 through 4 until the coils are fully clean.

Images: Alt

DeFoam MAX Waste Water Defoamer

Product Code: RXSOL-37-8127-025

Size:

Color:

Product Short Description: Eliminates foam formation, enhances system efficiency, and prevents overflow issues in aeration tanks and treatment plants
Product Technical Specification:

 

Physical Properties

 

Properties

Value

Appearance

Creamy white Liquid

Specific Gravity

1.02 -1.05

Flash point

90 -100 ° F

Character

Non- Ionic

PH Value

6-7

Remarks:

RXSOL BRAND Oilfield Chemical Products Company and supplier in Mussafah Industrial Area Abudhabi, Dubai, Sharjah, Ajman, Fujairah UAE, Muscat Barka Sohar Oman.

RXSOL Brand some valuable Oil field Chemical products are as follows:
 
Corrosion Inhibitors for Drilling : Which protects from corrosion all drilling equipment including tools, drill string pipes, tubulars, and other accessories.
Defoamers : Helps to control foaming during drilling fluids operation.
Foaming Agents : Helps to enhance foam during production of drilling fluid.
Detergents : Plays very important role to minimize the surface tension of the liquid phase and remove drill solids.
Oxygen Scavengers ::: Most important maintenance and oil field treatment chemicals which helps to collect and remove H2S from salt-based (brine) fluid systems.
Viscosifiers are thickening agents that increase the viscosity of water-based and non-aqueous-based drilling fluids, including oil-based and synthetic-based drilling fluids.
Images: Alt

DeFoam MAX Waste Water Defoamer

Product Code: RXSOL-37-8127-210

Size:

Color:

Product Short Description: Eliminates foam formation, enhances system efficiency, and prevents overflow issues in aeration tanks and treatment plants
Product Technical Specification:

 

Physical Properties

 

Properties

Value

Appearance

Creamy white Liquid

Specific Gravity

1.02 -1.05

Flash point

90 -100 ° F

Character

Non- Ionic

PH Value

6-7

Remarks:

RXSOL BRAND Oilfield Chemical Products Company and supplier in Mussafah Industrial Area Abudhabi, Dubai, Sharjah, Ajman, Fujairah UAE, Muscat Barka Sohar Oman.

RXSOL Brand some valuable Oil field Chemical products are as follows:
 
Corrosion Inhibitors for Drilling : Which protects from corrosion all drilling equipment including tools, drill string pipes, tubulars, and other accessories.
Defoamers : Helps to control foaming during drilling fluids operation.
Foaming Agents : Helps to enhance foam during production of drilling fluid.
Detergents : Plays very important role to minimize the surface tension of the liquid phase and remove drill solids.
Oxygen Scavengers ::: Most important maintenance and oil field treatment chemicals which helps to collect and remove H2S from salt-based (brine) fluid systems.
Viscosifiers are thickening agents that increase the viscosity of water-based and non-aqueous-based drilling fluids, including oil-based and synthetic-based drilling fluids.
Images: Alt

FERRIC SULPHATE

Product Code: RXSOL-43-6604-025

Size:

Color:

Product Short Description: It is a reducing agent, Ferrous sulfate is mainly used as a precursor to other iron compounds
Product Technical Specification:
Remarks:
Images: Alt

RXSOL ORG CNE 2465

Product Code: RXSOL-10-3256-025

Size:

Color:

Product Short Description: Is a cutting fluid for general machining of aluminum steel and cast iron in a variety of water hardness conditions.
Product Technical Specification:
Remarks:
Images: Alt

ALCA SOL RX

Product Code: RXSOL-70-7033-500

Size:

Color:

Product Short Description: ALCA SOLUTION
Product Technical Specification:
Remarks:
Images: Alt

Copper Cyanide NOT FOR SALE

Product Code: RXSOL-19-7589-025

Size:

Color:

Product Short Description: Is an inorganic compound with the formula CuCN
Product Technical Specification:

PHYSICAL PROPERTIES

Appearance A Green Powder 
Density 2.92 g/mL at 25 °C 
Melting point 474 °C
Insoluble in Water
Remarks:
Toxicity
Copper cyanide is toxic and can be absorbed through the skin, inhaled, or ingested. It can also produce toxic oxides of nitrogen in fires. 
Environmental hazard
Copper cyanide is an environmental hazard if handled or disposed of improperly. It is very toxic to aquatic life and can have long-lasting effects.
Images: Alt

Copper chloride

Product Code: RXSOL-60-6025-050

Size:

Color:

Product Short Description: a brownish-yellow powder.
Product Technical Specification:
Remarks:
Images: Alt

Copper Oxide

Product Code: RXSOL-19-1335-028

Size:

Color:

Product Short Description: Copper(I) oxide reacts with water in the presence of oxygen, forms copper(II) hydroxide.
Product Technical Specification:
Remarks:
Images: Alt

Defoamer Antifoam Silicon Free

Product Code: RXSOL-14-2066-210

Size:

Color:

Product Short Description: Mechanism of foam breakage by a defoamer which is SILICON free product. This inolves spreading of an water-insoluble surfacatant on the bubble surfaces.
Product Technical Specification:

General information

 

Appearance

 

Physical state

Liquid.

Color

Clear.

Odor

Faint odor.
Important health, safety and environmental information  
pH 7
Boiling/condensation point >85°C
Melting/freezing point Not available.
Flash point Closed cup: 229.4°C (444.9°F)
Flammable limits Not available.
Auto-ignition temperature Not available.
Vapor pressure Not available.
Specific gravity 1.01
Partition coefficient: noctanol/
water (log Kow)
Not available.
Viscosity Kinematic: 1.75 cm2/s (175 cSt at 40°C)
Density Not available.
Vapor density >1 [Air = 1]
Evaporation rate (butyl
acetate = 1)
Not available.
 
Remarks:
Images: Alt

Antifoam Defoamer Silicon Free

Product Code: RXSOL-40-2066-025

Size:

Color:

Product Short Description: Mechanism of foam breakage by a defoamer which is SILICON free product. This inolves spreading of an water-insoluble surfacatant on the bubble surfaces.
Product Technical Specification:

General information

 

Appearance

 

Physical state

Liquid.

Color

Clear.

Odor

Faint odor.
Important health, safety and environmental information  
pH 7
Boiling/condensation point >85 C
Melting/freezing point Not available.
Flash point Closed cup: 229.4 C (444.9 F)
Flammable limits Not available.
Auto-ignition temperature Not available.
Vapor pressure Not available.
Specific gravity 1.01
Partition coefficient: noctanol/
water (log Kow)
Not available.
Viscosity Kinematic: 1.75 cm2/s (175 cSt at 40 C)
Density Not available.
Vapor density >1 [Air = 1]
Evaporation rate (butyl
acetate = 1)
Not available.
 
Remarks:
Images: Alt
stock-clearance.png