Appearance | Light yellow liquid |
Active Ingredient | 14% |
Viscosity | 16 cps @ 25°C |
pH | 2.0-4.0 |
Specific Gravity (g/ml) at 20°C |
1.27-1.33 |
5-Chloro-2-Methyl-4-Isothiazoline-one |
10.1 - 11.3 |
Magnesium (%) | 4.2 - 5.5 |
2-Methyl-4-Isothiazoline-3-one | 3.0 - 4.1 |
CMIT/MIT 14% as chemical biocide algaecide is ideally suited to meet the requirements of an industrial water treatment biocide and excellent Isothiazolinone biocide. Isothiazolinone CMIT/MIT 14% microbicide is not deactivated by suspended organic matter, and is compatible with other water treatment additives, including chlorine. With the recent change of many cooling towers and paper mills to alkaline operating conditions, it is important to use a biocide such as Isothiazolinone CMIT/MIT 14% which remains stable at higher pH values. Isothiazolinone CMIT/MIT 14% is of low toxicity at use levels, easily deactivated and biodegradable.
-Used as sludge stripper
-Used as biocide
-Used in waste water treatment in oilfield
-Cosmetic
-Papermaking
-Pesticide
-Leather
-Detergent
Application Field / Industry :
PRODUCT NAME | : | PARAFFIN WAX emulsion |
CAS number | : | 8002-74-2 |
UN number | : | |
Formula | : | HOOCCOOH.2H2O |
Odour | : | ODOURLESS |
Solubility in water | : | SOLUBLE |
Flashpoint | : | 199 oC |
Explosive limits | : | |
Vapour pressure | : | |
Skin absorption/irritation | : | NO |
TLV Country NL Year 1995 | : | ppm 1mg/m3 |
Pollution category 1994 | : | III |
Paraffin wax is mostly found as a white, odorless, tasteless, waxy solid, with a typical melting point between about 46 and 68 °C (115 and 154 °F), and a density of around 900 kg/m3. It is insoluble in water, but soluble in ether, benzene, and certain esters. Paraffin is unaffected by most common chemical reagents but burns readily. Its heat of combustion is 42 MJ/kg.
Paraffin wax is an excellent electrical insulator, with a resistivity of between 1013 and 1017 ohm metre. This is better than nearly all other materials except some plastics (notably Teflon). It is an effective neutron moderator and was used in James Chadwick's 1932 experiments to identify the neutron.
Paraffin wax is an excellent material for storing heat, with a specific heat capacity of 2.14–2.9 J g−1 K−1 (joules per gram kelvin) and a heat of fusion of 200–220 J g−1. Paraffin wax phase-change cooling coupled with retractable radiators was used to cool the electronics of the Lunar Roving Vehicle during the manned missions to the Moon in the early 1970s. Wax expands considerably when it melts and this allows its use in wax element thermostats for industrial, domestic and, particularly, automobile purposes.
Appearance: Clear, viscous liquid
Specific Gravity at 25° C (77° F): 1.4
Flash Point (PMCC): None
Freeze Point: 0° C (32° F)
pH: 11.0
Future & Benefit
Features |
Benefits |
Odorless/tasteless |
Recommended for potable/fresh water tanks |
Concentrated liquid |
Cost effective and Easy to apply |
Forms protective silicate film |
Protects potable and fresh water tanks against corrosion.Prevents red water conditions |
Drinking Water Additives |
Safe to use |
Product Specification
Product Number: | C4901 |
CAS Number: | 10043-52-4 |
MDL: | MFCD00010903 |
Formula: | CaCl2 |
Formula Weight: | 110.98 g/mol |
Test | Specifications |
Appearance (Color) | White |
Appearance (Form) | Powder |
Solubility (Color) | Colorless to Very Faint Yellow |
Solubility (Turbidity) | Clear |
10 g + 100 ml, H2O Titration with EDTA | >_ 97.0 % |
Magnesium & Alkali Salts | <_ 3.0 % |
Recommended Retest Period 5 years |
|
Calcium chloride Flake and Pellets supplier and distributor. Both our Calcium Chloride Flakes and our Calcium Chloride Pallets are available in 50 kg bags and Jumbo Bags.
Anhydrous Specifications
Product Calcium Chloride 95%+/-1% (Anhydrous)
CAS No. 10043-52-4
Mol.formula CaCl2
Mol.wt 110.98 g/mol
Appearance White lumps/Powder
Assay 99.5 % Min.
pH 8.5 to 9.5%
Arsenic Nil
Heavy Metals Nil
Packing 40 kgs HDPE bags for Lumps/50 Kgs Bags for powder
Dihydrate Specifications
Product Calcium Chloride - 75-80% (Dihydrate)
CAS No. 10035-04-8
Mol.formula CaCl2
Mol.wt 147
Appearance White lumps/Powder
Assay 75% Minimum
pH 8.5 to 9.5%
Arsenic Nil
Heavy Metals Nil
Packing 50 kgs HDPE bags
Properties | Unit | Typical Value |
Form and Appearance | - | Clear Colorless Liquid |
Odor | - | Characteristic |
pH (neat) | pH | Alkaline |
Solubility | - | Completely Soluble in Water |
Property Description |
Specification |
Purity, % |
99.1 min |
Sulphate, % |
0.5 max |
Insoluble in water, % |
0.05 max |
P2O5 % |
41 min |
CO3 % |
0.40 max |
NaOH % |
2.87 max |
Arsenic, % |
0.005 max |
Iron % |
0.01 max |
Chloride,% |
0.7 max |
Fluoride, % |
0.003 max |
Methyl Orange |
16.5-19.0 |