AMMONIA SOLUTION
AMMONIA SOLUTION 25% LR
- Part number
- RXSOL-60-6552-001
- Category
- Lab Chemical
- Brand
- RXSOL
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | Ammonia Solution |
| Part Number | RXSOL-60-6552-001 |
Company Details:....
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Mumbai , Chennai, Vizag, Kolkata, UAE , OMAN , CANADA and KENYA
| Phone | +91 22 20871200 - 1400 |
| Fax | +91 22 27612100 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com | |
| Website | www.rxmraine.com |
Mixtures
| Component | Classification | Concentration |
| Ammonia solution | ||
|
CAS-No. 1336-21-6
EC-No 215-647-6
Index-No. 007-001-01-2
Registration 01-2119488876-14-
number XXXX
|
Skin Corr. 1B; Eye Dam.
1; STOT SE 3; Aquatic
Acute 1; Aquatic Chronic
1; H314, H318, H335,
H400, H410
Concentration limits:
>= 5 %: STOT SE 3,
H335;
M-Factor - Aquatic Acute:
10
M-Factor - Aquatic
Chronic: 1
|
>= 25 - < 30 % |
For the full text of the H-Statements mentioned in this Section, see Section 16.
Classification of the substance or mixture
| Classification according to Regulation (EC) No 1272/2008 |
Skin corrosion (Sub-category 1B), H314
Serious eye damage (Category 1), H318
Specific target organ toxicity - single exposure (Category 3), Respiratory system, H335
Short-term (acute) aquatic hazard (Category 1), H400
Long-term (chronic) aquatic hazard (Category 2), H411
For the full text of the H-Statements mentioned in this Section, see Section 16.
|
Label elements
| Signal Word | Danger |
|
Hazard Statements |
H314 Causes severe skin burns and eye damage.
H335 May cause respiratory irritation.
H410 Very toxic to aquatic life with long lasting effects.
|
|
Precautionary Statements |
P261 Avoid breathing dust/ fume/ gas/ mist/ vapors/ spray.
P271 Use only outdoors or in a well-ventilated area.
P273 Avoid release to the environment.
P280 Wear protective gloves/ protective clothing/ eye protection/ face protection.
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated
clothing. Rinse skin with water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue rinsing.P261 Avoid breathing dust/ fume/ gas/ mist/ vapors/ spray.
P271 Use only outdoors or in a well-ventilated area.
P273 Avoid release to the environment.
P280 Wear protective gloves/ protective clothing/ eye protection/ face
protection.
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated
clothing. Rinse skin with water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue
rinsing.P261 Avoid breathing dust/ fume/ gas/ mist/ vapors/ spray.
P271 Use only outdoors or in a well-ventilated area.
P273 Avoid release to the environment.
P280 Wear protective gloves/ protective clothing/ eye protection/ face
protection.
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated
clothing. Rinse skin with water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue
rinsing.
|
| Supplemental Hazard Statements | None |
| Reduced Labeling (<= 125 ml) | |
| Signal Word | Danger |
| Hazard statement(s) |
H314 Causes severe skin burns and eye damage.
|
| Precautionary statement(s) |
P280 Wear protective gloves/ protective clothing/ eye protection/ face protection.
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue rinsing.
|
| Supplemental Hazard Statements | None |
| Other hazards |
This substance/mixture contains no components considered to be either persistent,
bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at
levels of 0.1% or higher.
|
Description of first aid measures
| General advice | First aiders need to protect themselves. |
| If inhaled | After inhalation: fresh air. Call in physician. |
| In case of skin contact | In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower. Call a physician immediately. |
| In case of eye contact | After eye contact: rinse out with plenty of water. Immediately call in ophthalmologist. Remove contact lenses. |
| If swallowed | After swallowing: make victim drink water (two glasses at most), avoid vomiting (risk of perforation). Call a physician immediately. Do not attempt to neutralise. |
| Most important symptoms and effects, both acute and delayed | The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11 |
| Indication of any immediate medical attention and special treatment needed | No data available |
Extinguishing media
| Suitable extinguishing media | Foam Carbon dioxide (CO2) Dry powder |
| Unsuitable extinguishing media | For this substance/mixture no limitations of extinguishing agents are given. |
| Special hazards arising from the substance or mixture |
Highly flammable liquid and vapor. Runoff to sewer may create fire or explosion hazard.
In a fire or if heated, a pressure increase will occur and the container may burst, with the
risk of a subsequent explosion. The vapor/gas is heavier than air and will spread along
the ground. Vapors may accumulate in low or confined areas or travel a considerable
distance to a source of ignition and flash back.
Highly flammable liquid and vapor. Runoff to sewer may create fire or explosion hazard.
In a fire or if heated, a pressure increase will occur and the container may burst, with the
risk of a subsequent explosion. The vapor/gas is heavier than air and will spread along
the ground. Vapors may accumulate in low or confined areas or travel a considerable
distance to a source of ignition and flash back.
Highly flammable liquid and vapor. Runoff to sewer may create fire or explosion hazard.
In a fire or if heated, a pressure increase will occur and the container may burst, with the
risk of a subsequent explosion. The vapor/gas is heavier than air and will spread along
the ground. Vapors may accumulate in low or confined areas or travel a considerable
distance to a source of ignition and flash back.
Carbon oxides
Combustible.
Vapors are heavier than air and may spread along floors.
Forms explosive mixtures with air at elevated temperatures.
Development of hazardous combustion gases or vapours possible in the event of fire.
|
| Advice for firefighters |
Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing. |
| Further information |
Remove container from danger zone and cool with water. Prevent fire extinguishing water from contaminating surface water or the ground water system.
spray to keep fire-exposed containers cool.Promptly isolate the scene by removing all persons from the vicinity of the incident if
there is a fire. No action shall be taken involving any personal risk or without suitable
training. Move containers from fire area if this can be done without risk. Use water
spray to keep fire-exposed containers cool.
|
| Personal precautions, protective equipment and emergency procedures | Advice for non-emergency personnel: Avoid inhalation of dusts. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert. For personal protection see section 8. |
| Environmental precautions | Do not let product enter drains. |
| Methods and materials for containment and cleaning up | Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions (see sections 7 and 10). Take up dry. Dispose of properly. Clean up affected area. Avoid generation of dusts. |
| Reference to other sections | For disposal see section 13. |
Precautions for safe handling
| Advice on safe handling | Work under hood. Do not inhale substance/mixture. Avoid generation of vapours/aerosols. |
| Advice on protection against fire and explosion | Keep away from open flames, hot surfaces and sources of ignition.Take precautionary measures against static discharge. |
| Hygiene measures |
Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance.
For precautions see section 2.2.
|
| Conditions for safe storage, including any incompatibilities | |
| Storage conditions | Keep container tightly closed in a dry and well-ventilated place. Keep away from heat and sources of ignition. Keep locked up or in an area accessible only to qualified or authorized persons. |
| Storage class | Storage class (TRGS 510): 3: Flammable liquids |
| Specific end use(s) | Apart from the uses mentioned in section 1.2 no other specific uses are stipulated |
Control parameters
Ingredients with workplace control parameters
Exposure controls
Personal protective equipment
| Eye/face protection | Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Tightly fitting safety goggles |
| Skin protection | Required |
| Body Protection | Flame retardant antistatic protective clothing. |
| Respiratory protection |
Required when vapours/aerosols are generated.Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system.
Recommended Filter type: Filter type ABEK
The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer.
These measures have to be properly documented.
|
| Control of environmental exposure | Do not let product enter drains. Risk of explosion. |
| Physical state | Liquid |
| Colour | Colorless |
| Odor | Stinging |
| Melting point/freezing point | Melting point: -57,5 °C |
| Initial boiling point and boiling range | 37,7 °C at 1.013 hPa |
| Flammability (solid, gas) | No data available |
| Upper/lower flammability or explosive limits |
Upper explosion limit: 33,6 %(V)
Lower explosion limit: 15,4 %(V)
|
| Flash point | No data available |
| Autoignition temperature | No data available |
| Decomposition temperature | No data available |
| pH |
At 20 °C
strongly alkaline
|
| Viscosity |
Viscosity, kinematic: No data available
Viscosity, dynamic: No data available
|
| Water solubility | At 20 °C soluble |
| Partition coefficient: n-octanol/water | log Pow: -1,38 - (anhydrous substance), (Lit.), Bioaccumulation is not expected. |
| Vapor pressure | 483 hPa at 20 °C |
| Density | 0,903 g/cm3 at 20 °C |
| Relative density | No data available |
| Relative vapor density | No data available |
| Particle characteristics | No data available |
| Explosive properties | Not classified as explosive. |
| Oxidizing properties | No data available |
| Other safety information | No data available |
| Reactivity |
No data available
|
| Chemical stability |
Ammonia solution itself is not flammable, but can form an ignitable ammonia/air-mixture by outgassing.
|
| Possibility of hazardous reactions |
A risk of explosion and/or of toxic gas formation exists with the following substances:
Oxidizing agents
Mercury
Oxygen
silver compounds
nitrogen trichloride
hydrogen peroxide
silver
antimony hydride
Halogens
Acids
Calcium
Chlorine
Chlorites
auric salts
perchlorates
sodium hypochlorite
mercury compounds
halogen oxides
Heavy metals
Heavy metal salts
Acid chlorides
Acid anhydrides
Risk of ignition or formation of inflammable gases or vapours with:
Boranes
Boron
Oxides of phosphorus
Nitric acid
silicon compounds
chromium(VI) oxide
chromyl chloride
Exothermic reaction with:
Acetaldehyde
Acrolein
Barium
boron compounds
Bromine
halogen-halogen compounds
hydrogen bromide
silane
Hydrogen chloride gas
halogen compounds
dimethylsulfate
nitrogen oxides
Fluorine
Hydrogen fluoride
chlorates
carbon dioxide
Ethylene oxide
polymerisable
|
| Conditions to avoid |
Heating
|
| Incompatible materials |
Aluminum, Lead, Nickel, silver, Zinc, Copper, metal alloys, various metals
|
| Hazardous decomposition products | In the event of fire: see section 5 |
Information on toxicological effects
| Acute toxicity |
Oral: No data available
Symptoms: mucosal irritations, Cough, Shortness of breath, bronchitis, Possible damages:,
damage of respiratory tract
Dermal: No data available
|
| Skin corrosion/irritation |
Skin - Rabbit
Result: Severe irritations
Remarks: (29% solution)
(RTECS)
Remarks: Dermatitis
NecrosisSkin - Rabbit
Result: Severe irritations
Remarks: (29% solution)
(RTECS)
Remarks: Dermatitis
Necrosis
|
| Serious eye damage/eye irritation |
Eyes - Rabbit
Result: Severe irritations
Remarks: (29% solution)
(RTECS)
Remarks: Mixture causes serious eye damage.
Risk of blindness!
|
| Respiratory or skin sensitization | No data available |
| Germ cell mutagenicity | No data available |
| Carcinogenicity |
No data available
|
| Reproductive toxicity | No data available |
| Specific target organ toxicity-single exposure) | Mixture may cause respiratory irritation. - Respiratory system |
| Specific target organ toxicity-repeated exposure) |
No data available
|
| Aspiration hazard | No data available |
| Additional Information | |
|
Endocrine disrupting properties
Product
|
|
| Assessment |
The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher.
Cough
Shortness of breath
bronchitis
gastric pain
Bloody vomiting
Nausea
collapse
shock
Unconsciousness
Other dangerous properties can not be excluded.
Handle in accordance with good industrial hygiene and safety practice.
|
| Persistence and degradability | No data available |
| Toxicity to fish | Static test LC50 - Oncorhynchus mykiss (rainbow trout) - 75 mg/l - 96 h (OECD Test Guideline 203) |
| Toxicity to daphnia and other aquatic invertebrates | Static test EC50 - Daphnia magna (Water flea) - 42,81 mg/l - 48 h (OECD Test Guideline 202) Remarks: (in analogy to similar products) The value is given in analogy to the following substances: maleic acid |
| Toxicity | Toxicity to fish LC50 - Pimephales promelas (fathead minnow) - 1.520 mg/l - 96 h |
| Toxicity to bacteria | EC10 - Bacteria - 14 mg/l - 72 h Remarks: (Lit.) EC5 - E.coli - 15.000 mg/l Remarks: (Lit.) (maximum permissible toxic concentration) |
| Toxicity to algae | Static test ErC50 - Pseudokirchneriella subcapitata (green algae) - 74,35 mg/l - 72 h (OECD Test Guideline 201) Remarks: (in analogy to similar products) The value is given in analogy to the following substances: maleic acid |
| Products Biodegradation | The methods for determining the biological degradability are not applicable to inorganic substances. |
| Mobility in soil | No data available |
| Results of PBT and vPvB assessment | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
| Endocrine disrupting properties | No data available |
| Other adverse effects | No data available . |
| Waste treatment Method | |
| Product | See www.retrologistik.com for processes regarding the return of chemicals and containers, or contact us there if you have further questions. |
| UN number | ADR/RID:2672 IMDG:2672 IATA: 2672 |
| UN proper shipping name |
ADR/RID: AMMONIA SOLUTION
IMDG: AMMONIA SOLUTION
IATA: Ammonia solution
|
| Transport hazard class(es) | ADR/RID: 8 IMDG: 8 IATA:8 |
| Packaging group | ADR/RID: IIl IMDG: IIl IATA:IIl |
| Environmental hazards | ADR/RID: No IMDG: No IATA: No |
| Special precautions for user | No data available |
| Further information | Not classified as dangerous in the meaning of transport regulations. |
| Safety, health and environmental regulations/legislation specific for the substance or mixture | This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006. |
| Other regulations | Take note of Dir 94/33/EC on the protection of young people at work. |
| Chemical Safety Assessment | For this product a chemical safety assessment was not carried out |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and weassume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. |
Availability
AMMONIA SOLUTION manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of AMMONIA SOLUTION at a competitive price from us. We have ready stock of AMMONIA SOLUTION in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
