Masonry Brick Cleaner

Product Code: RXSOL-13-1048-025

Size:

Color:

Product Short Description: An all purpose cleaner for brick and masonry, quickly and efficiently remove mortar residue, wood and rust stains.
Product Technical Specification:

TYPICAL PROPERTIES

Property Typical Value
Appearance Clear to pale yellow liquid
Nature Acidic cleaner
Solubility Completely miscible with water
pH Strongly acidic
Specific Gravity Approx. 1.05–1.15 at 25°C*
Odour Characteristic acidic odour
Application Masonry, brick and construction cleaning
Dilution Typically 1:1 to 1:20 depending upon application

*Final specification should be based on production QC/formulation.



Typical descaling cleaning procedure :

1st Stage : Take ‘RXSOL-11-1053-010’ weblink ( http://rxmarine.com/Alkaline-Descaler )   and mix with water in the ratio of 1:6 (One litre of RXSOL-1053 and six litres of water). Circulate the solution or immerse the equipment in this solution for 2 hrs. This will be helpful in loosening the hard deposited scale. 

2nd Stage : Circulate the entire system with ample fresh water, at least for 10 minutes.
 
3rd Stage : Take ‘RXSOL-40-1048-025’ and mix with water in the ratio of 1:6 (One litre of RXSOL-1048 and six litres of water). Circulate the solution or immerse the equipment in this solution for 6-8 hrs.
 
4th Stage : Flush the entire system with ample fresh water, at least for  20 minutes.
 
5th Stage :  Take ‘RXSOL-11-1053-010’ weblink ( http://rxmarine.com/Alkaline-Descaler )  and mix with water in the ratio of 1:6 (One litre of NF and six litres of water). Circulate the solution or immerse the equipment in this solution for 2 hrs.

 
6th Stage : Flush the entire system with ample fresh water, till the ph value of outlet water  match as fresh water. 
Remarks:

RXSOL-40-1048-025 should not be used on Aluminium, Zinc, Tin, or any Galvanized Surfaces for which a special grade cleaner should be used. Chemical Cleaning Module Rx cleansers has developed a 280 litres capacity cleaning module, primarily designed for use with chemical acid solvents for descaling boilers, calorifiers, heat exchangers & other types of equipment where rust & scale form RXSOL-11-1008--DC Boilers, See Rx cleansers Practical Application Manual.

Formation of Calcium Sulfate is main cause for SCALE formation :::

The principal problem potential posed by sulfate ions in water is the possibility of calcium sulfate scale formation.  Precipitation of calcium sulfate can occur when high concentrations of both calcium and sulfate exist simultaneously.  There are three primary areas of water treatment in which calcium sulfate precipitation may occur boilers, cooling systems, and ion exchangers operating in the hydrogen or acid mode.

In boilers, calcium sulfate scale formation has been reduced to a minimum by modern treatment practices.  The low hardness levels largely preclude calcium sulfate boiler scale.    By contrast, cooling systems are subject to calcium sulfate scale deposition because the makeup is usually not treated for hardness removal.  Cooling water is usually treated with sulfuric acid for pH control, and the makeup is cycled, i.e. concentrated.  Calcium sulfate scale deposition can  result unless the cycles of concentration are properly controlled in conjunction with the proper use of scale control chemicals.  Cation ion exchangers regenerated with sulfuric acid also can pose a major calcium sulfate problem. Calcium sulfate precipitation can be avoided by controlling the acid concentration and the flow rate through the exchanger.  

Sulfate content can be calculated in Laboratory by using this method ::: http://rxmarine.com/SULFATE-TEST-KIT

Images: Alt

Polish Preparation For Metal

Product Code: RXSOL-94-9427-035

Size:

Color:

Product Short Description: Application Metal Polish Preparation
Product Technical Specification:
Remarks:
Images: Alt

Diphenyl Phthalate

Product Code: RXSOL-46-1149-240

Size:

Color:

Product Short Description: Is the diphenyl ester of benzene 1 2 dicarboxylic acid
Product Technical Specification:
PHYSICAL PROPERTIES
Appearance White Powder to Crystal
Purity(GC) min. 98.0 %
Melting point 72.0 to 76.0 °C
Solubility in Hot Methanol Almost transparency
Remarks:

Chemical properties: Diphenyl phthalate has the following chemical and physical properties:

  • Exact mass: 318.08920892 g/mol
  • Hydrogen bond donor count: 0
  • Hydrogen bond acceptor count: 4
  • Rotatable bond count: 6
  • Topological polar surface area: 52.6Ų
  • Heavy atom count: 24 
Images: Alt

Polish Preparation For Metal SL

Product Code: RXSOL-13-1912-0253

Size:

Color:

Product Short Description: Application Metal Polish Preparation
Product Technical Specification:
Remarks:
Images: Alt

Polish Preparation for Metal Mixed SB

Product Code: RXSOL-94-9492-050

Size:

Color:

Product Short Description: Metal Polish Preparation
Product Technical Specification:
Remarks:
Images: Alt

Polish Preparation For Metal Mixed ECS

Product Code: RXSOL-94-9426-050

Size:

Color:

Product Short Description: Cleaning agent, Polish, stain remover and degreaser. And also use for preparing smooth surfaces for painting. Trisodium phosphate can also be found as a food additive
Product Technical Specification:
Remarks:
Images: Alt

PARAFFIN WAX BLOCK BRICKS SLAB

Product Code: RXSOL-60-6605-180

Size:

Color:

Product Short Description: PARAFFIN WAX 58 60C BLOCK BRICKS
Product Technical Specification:

Characteristics of Paraffin Wax Slab

Characteristics Test Method Standard Results
Drop Melting Point, deg C ASTM D 127 58-62
Oil Content, %, MAX ASTM D 721 3-5
Penetration at 25 deg C, 0.1mm MAX ASTM D 1321 15-35
Colour VISUAL WHITE to PALE yellow
Remarks:
Images: Alt

Floor Polish 25

Product Code: RXSOL-13-1015-002

Size:

Color:

Product Short Description: RXSOL Floor Polish not only protects and extends the life of floors but also provides a safe high gloss finish which is easy to maintain and resistant to scuffing.
Product Technical Specification:
Remarks:
Images: Alt

Pine Oil Emulsifier

Product Code: RXSOL-13-1751-025

Size:

Color:

Product Short Description: It is highly conc. non ionic based products.
Product Technical Specification:

 

Appearance : Clear Amber fluid
Specific Gravity@29oC : 1.05
Flash Point (COC) oC : 150 mm
Viscosity @40oC : 60 CST mm

Ph for 5% emulsion

: 8.5 to   9 min
Remarks:
Images: Alt

White Phenyl Viscous PASTE

Product Code: RXSOL-13-1750-005

Size:

Color:

Product Short Description: Highly concentrates, thick, viscous cleaner, disinfect and deodorizer with uniquely blended formulation of pure pine oil with broad base disinfecting agent. It is safe, yet give excellent cleaning power on virtually any surface. Crisp fresh pine fragrance
Product Technical Specification:

 

Physical State : Thick Viscous Liquid
Colour : Milky white
Odour : Pine
pH : 7-8
Viscocity : NA
Boiling Point : 100 Deg C
Vepor Pressure : Not Known
Remarks:
Images: Alt
stock-clearance.png