STANNIC CHLORIDE HYDRATED 98%

Substance / Preparation: STANNIC CHLORIDE HYDRATED 98%

CAS No :10026-06-9

Substance.Contains no other components or impurities which will influence the classification of theproduct.

3.1. Classification of the substance or mixture

Classification EC 67/548 or EC 1999/45

Classification: C; R34

Hazard Class and Category Code(s), Regulation (EC) No 1272/2008 (CLP)

Health hazards: Skin corrosion-Category 1B-Danger (CLP : Skin Corr. 1B) H314

3.2. Label elements

Labelling EC 67/548 or EC 1999/45

Symbol(s): C : CorrosiveR Phrase(s): R34 : Causes burns.

S Phrase(s): S26 : In case of contact with eyes, rinse immediately with plenty of waterand seekmedical advice.

S36/37/39 : Wear suitable protective clothing, gloves and eye/face protection.

S45 : In case of accident or if you feel unwell, seek medical advice immediately

(showthe label when possible).

Labelling Regulation EC 1272/2008 (CLP)

Hazard pictograms

Signal words: Danger

Hazard statements: H314 : Causes severe skin burns and eye damage.Precautionary statements

• Prevention: P280: Wear protective gloves, protective clothing, eye protection, faceprotection.

P260: Do not breathe dust, fume, gas, mist, vapours,spray.

P264: Wash thoroughly after handling.

• Response: P301+P330+P331: IF SWALLOWED : Rinse mouth. Do NOT inducevomiting.

P305+P351+P338: IF IN EYES : Rinse cautiously with water for several minutes.

Remove contact lenses, if present and easy to do. Continue rinsing.

P304+P340: IF INHALED : Remove to fresh air and keep at rest in a positioncomfortable for breathing.

P303+P361+P353: IF ON SKIN (or hair) : Remove immediately all contaminatedclothing. Rinse skin with water/shower.

P363: Wash contaminated clothing before reuse

.• Storage: P405: Store locked up.

• Disposal considerations: P501: Dispose of this material and its container to hazardousor

special wastecollection point, in accordance with local, regional, national and/orinternationalregulation.

3.3. Other hazards

Other hazards: The substance does not fulfil the criteria to be identified as PBT

substance or vPvBsubstance according to Annex XIII of Regulation REACH.

4.1. Description of first aid measures

Inhalation: Removeto fresh air and keep at rest in a position comfortable for breathing.

Immediately call a POISON CENTER or doctor.

Skin contact: Immediately call a POISON CENTER or doctor. Wash with plenty ofsoap andwater.

Remove/Take off immediately all contaminated clothing.

Eye contact: Immediately call a POISON CENTER or doctor. Remove contact lenses,

ifpresentand easy to do. Continue rinsing. Rinse cautiously with water for several minutes.

Ingestion: Immediately call a POISON CENTER or doctor. Rinse mouth. DoNOTinducevomiting.

4.2. Most important symptoms and effects, both acute and delayed

Symptoms relating to use: Causes severe skin burns and eye damage.

4.3. Indication of any immediate medical attention and special treatment needed

General information:Never give anything by mouth to an unconscious person.

If youfeel unwell, seekmedical advice (show the label where possible).

5.1. Extinguishing media

Suitable extinguishing media: Foam. Dry powder. Carbon dioxide. Water spray. Sand.

Unsuitable extinguishing media: Do not use a heavy water stream.

Surrounding fires: Use water spray or fog for cooling exposed containers.

5.2. Special hazards arising from the substance or mixture

Hazardous combustion products: Under fire conditions, hazardous fumes will bepresent.

Thermal decomposition generates : Corrosive vapours.

5.3. Advice for fire-fighters

Protection against fire: Do not enter fire area without proper protective

equipment,including respiratoryprotection.

Special procedures: Exercise caution when fighting any chemical fire.

Avoid (reject)fire-fighting water toenter environment.

6.1. Personal precautions, protective equipment and emergency procedures

For emergency responders: Equip cleanup crew with proper protection.Ventilate area.

For non-emergency personnel: Evacuate unnecessary personnel.

6.2. Environmental precautions

Environmental precautions: Prevent entry to sewers and public waters.

Notifyauthorities if product enterssewers or public waters.

6.3. Methods and material for containment and cleaning up

Clean up methods: On land, sweep or shovel into suitable containers.

Minimizegeneration of dust.Store away from other materials.

6.4. Reference to other sections

See section 8. Exposure controls/personal protection

9.1. Information on basic physical and chemical properties

Physical state at20 °C: Solid.

Odour threshold: No data available.

pH value: Not applicable.

Melting point [°C]: 560C

Decomposition point [°C]: N/A

Critical temperature [°C]: N/A

Auto-ignition temperature [°C]: N/A

Flammability (solid, gas): N/A

Flash point [°C]:N/A

Boiling point [°C]: N/A

Initial boiling point [°C]: N/A

Final boiling point [°C]: N/A

Evaporation rate: N/A

Vapour pressure [20°C]: 30 mm Hg @ 200C

Vapour pressure mm/Hg: 30 mm Hg @ 200C

Vapour density: 9Density [g/cm3]: 2,04

Relative density, gas (air=1): N/A

Relative density, liquid (water=1): N/A

Solubility in water [% weight]: Soluble in water

Solubility in water: N/A

Log Pow octanol / water at 20°C: No data available.

Solubility: N/A

Viscosity at 40°C [mm2/s]: N/A

9.2. Other information

Explosive properties: N/A

Explosion limits-upper [%]: N/A

Explosion limits-lower [%]: N/A

Oxidising properties: No data available.

11.1. Information on toxicological effectsAcute toxicity

• Inhalation: Based on available data, the classification criteria are not met.

• Dermal: Based on available data, the classification criteria are not met.

• Ingestion: Based on available data,the classification criteria are not met

.Corrosion: Causes severe skin burns and eye damage.

Irritation: Based on available data, the classification criteria are not met.

Sensitization: Based on available data, the classification criteria are not met.

Mutagenicity: Based on available data, the classification criteria are not met.

Carcinogenicity: Based on available data, the classification criteria are not met.

Toxic for reproduction: Based on available data, the classification criteria are not met.

STOT-single exposure: Based on available data, the classification criteria are not met.

STOT-repeated exposure: Based on available data, the classification criteria are not met.

Aspiration hazard: Based on available data, the classification criteria arenot met.

12.1. Toxicity

Toxicity information: Not established.

12.2. Persistence-degradability

Persistence-degradability: Biodegradable.

12.3. Bioaccumulative potential

Bioaccumulative potential: Not established.

12.4. Mobility in soil

Mobility in soil: Not established.

12.5. Results of PBT and vPvB assessment

Results of PBT and vPvB assessment: The substance does

not fulfil the criteria to beidentified as PBT substance or vPvBsubstance

according to Annex XIII of RegulationREACH.

12.6. Other adverse effects

Environmental precautions: Avoid release to the environment.

13.1. Waste treatment methods

General: Avoid release to the environment.

Dispose in a safe manner in accordance withlocal/national regulations.

Dispose of this material and its container to hazardous or special waste

collectionpoint, in accordance with local, regional, national and/or international regulation.

15.1. Safety, health and environmental regulations/legislation specific for thesubstance or mixture

Safety, health and environmental: Ensure all national/local regulations are observed.

regulations/legislation specific for thesubstance or mixture

REACH Restrictions-Annex XVII: The components of this product are not subject torestrictions.

REACH Authorisation-Annex XIV: The components of this product are not subjectto authorization.

15.2. Chemical Safety Assessment

Chemical Safety Assessment: It has not been carried out.

Abbreviations and acronyms: PBT: persistent,bioaccumulative and toxic.vPvB: very persistent and very bioaccumulative

Sources of key data used: REGULATION (EC) No 1272/2008 OF THE EUROPEANPARLIAMENT AND OF THE COUNCIL

of 16 December 2008 on classification,labelling and packaging of substances andmixtures, amending and repealing Directives

67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006Further information: None.In accordance with REACH

Regulation (CE) Nº 1907/2006 and with CLP Regulation(CE) Nº 1272/2008 

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.