Di Iso Butyl Amine
- Part number
- RXSOL-19-1132-025
- Category
- Solvent Chemicals
- Brand
- RXSOL
Applications
| PRODUCT NAME | : | DI ISOBUTYL AMINE |
| CAS number | : | 108-83-8 |
| UN number | : | 1157 |
| Formula | : | [(CH3)2CHCH2]2NH |
| Odour | : | MILD |
| Solubility in water | : | NEGLIGIBLE |
| Density | : | 0.809 at 20 OC |
| Boiling point | : | 168 OC |
| Melting point | : | OC |
| Viscosity | : | |
| Flashpoint | : | 48 OC |
| Explosive limits | : | 0.8 – 6.2 Vol% |
| Vapour pressure | : | 5 mbar at 20 OC |
| Skin absorption/irritation | : | YES |
| TLV Country NL Year 1995 | : | 25 ppm 150 mg/m3 |
| Pollution category 1994 | : | D |
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Code | RXSOL-19-1132-025 |
| Product Name | Iso Butyl Amine |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333 / 5555 / 9999 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
| INGREDIENTS | CAS no |
EC-No. |
|
Isobutylamine |
78-81-9 |
201-145-4 |
| skin contact |
Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. Take victim immediately to hospital. Consult a physician. |
| eye contact | Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician |
|
inhaled |
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician |
|
swallowed |
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician. |
|
swallowed |
|
|
|
inhaled |
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician |
|
|
skin contact |
Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. Take victim immediately to hospital. Consult a physician. |
|
|
eye contact |
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician |
|
Suitable extinguishing media |
For small (incipient) fires, use media such as "alcohol" foam, dry chemical, or carbon dioxide. For large fires, apply water from as far as possible. Use very large quantities (flooding) of water applied as a mist or spray; solid streams of water may be ineffective. Cool all affected containers with flooding quantities of water. |
|
Advice for fire fighters |
Wear self contained breathing apparatus for fire fighting if necessary. |
|
Further information |
Use water spray to cool unopened containers |
|
Personal precautions |
Wear respiratory protection. Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Remove all sources of ignition. Evacuate personnel to safe areas. Beware of vapours accumulating to form explosive concentrations. Vapours can accumulate in low areas |
|
Environmental precautions |
Prevent further leakage or spillage if safe to do so. Do not let product enter drains |
|
Methods and materials for containment and cleaning up |
Contain spillage, and then collect with an electrically protected vacuum cleaner or by wet-brushing and place in container for disposal according to local regulations |
|
Precautions for safe handling |
Avoid contact with skin and eyes. Avoid inhalation of vapour or mist. Keep away from sources of ignition - No smoking.Take measures to prevent the build up of electrostatic charge. |
|
Conditions for safe storage, including any incompatibilities |
Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage |
|
engineering controls |
Avoid contact with skin, eyes and clothing. Wash hands before breaks and immediately after handling the product |
|
Eye/face protection |
Tightly fitting safety goggles. Faceshield (8-inch minimum). Use equipment for eye protection tested and approved under appropriate government |
|
Skin protection |
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. |
|
Appearance |
clear liquid |
|
Odour |
NA |
|
pH |
NA |
|
Melting point/freezing point |
-85 °C - lit. |
|
Flash point |
-9 °C - closed cup |
|
Vapour pressure |
NA |
|
Relative density |
0,736 g/cm3 at 25 °C |
|
Water solubility |
NA |
Reactivity :- N/A
Chemical stability :- N/A
Incompatible materials :- Strong oxidizing agents
|
Skin |
May be harmful if absorbed through skin. May cause skin irritation. |
|
Eyes |
may cause eye irritation |
|
Inhalation |
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician |
|
Toxicity |
NA |
|
Bioaccumulative potential |
N/A |
|
Persistence and degradability |
NA |
|
Mobility in soil |
NA |
Waste treatment methods
Product
Burn in a chemical incinerator equipped with an afterburner and scrubber but exert extra care in igniting as this material is highly flammable.
Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed professional waste disposal service to dispose
of this material
Contaminated packaging
Dispose of as unused product.
N/A
REGULATORY INFORMATION
This safety datasheet complies with the requirements of Regulation
Safety, health and environmental regulations/legislation specific for the substance or mixture
N/A
The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this
document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
Availability
Di Iso Butyl Amine manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Di Iso Butyl Amine at a competitive price from us. We have ready stock of Di Iso Butyl Amine in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
