Floor Care (Polish / Cleaner )
PARAFFIN WAX BLOCK BRICKS SLAB
- Part number
- RXSOL-60-6605-180
- Category
- Floor Care (Polish / Cleaner )
- Brand
- RXSOL
Overview
Paraffin is a alkane hydrocarbon that has a variety of practical uses in industries such as medicine, agriculture and cosmetics. Paraffin is widely used as fuel for jet engines and rockets and as fuel or a fuel component for diesel and tractor engines. RXSOL PARAFFIN WAX SLAB is characterized by a clearly defined crystal structure and tendency to be hard and brittle, low oil content, good stability. RXSOL paraffin waxes contain less than 5% oil and have been hydro treated to remove impurities. RXSOL PARAFFIN WAX SLAB is highest grade of refinement. RXSOL PARAFFIN WAX SLAB consist of a mixture of hydrocarbon molecules containing between twenty and forty carbon atoms.
Technical specifications
Characteristics of Paraffin Wax Slab
| Characteristics | Test Method | Standard Results |
| Drop Melting Point, deg C | ASTM D 127 | 58-62 |
| Oil Content, %, MAX | ASTM D 721 | 3-5 |
| Penetration at 25 deg C, 0.1mm MAX | ASTM D 1321 | 15-35 |
| Colour | VISUAL | WHITE to PALE yellow |
Applications
Paraffin is a alkane hydrocarbon that has a variety of practical uses in industries such as medicine, agriculture and cosmetics.
Uses of Paraffin Wax Slab
-
In a wide range of Industries, either as a major constituent or as an end product. Such as floor polishes, Car Polishes, corrosion protectors.
-
Tyres and Rubber products as ozone protection. Paper production. Carbon Paper, Crayons and Pencils, Ski Waxes.
-
Polishes to improve buff ability, to provide solvent binding and solvent retention properties.
-
Cosmetics and Pharmacy to act as base component in various formulations.
-
Hot Melt Adhesives.
Dosage and directions
Characteristics and notes
Paraffin wax is a white or colourless soft solid derivable from petroleum, coal or oil shale, that consists of a mixture of hydrocarbon molecules containing.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | |
| Part Number |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Mumbai , Chennai, Vizag, Kolkata, UAE , OMAN , CANADA and KENYA
| Phone | +91 22 20871200 - 1400 |
| Fax | +91 22 27612100 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com | |
| Website | www.rxmarine.com |
Ingredient: Paraffin Wax
| Signal Word | |
| Potential Acute Health Effects | |
| Potential Chronic Health Effects |
CARCINOGENIC EFFECTS :Not available. MUTAGENIC EFFECTS :Not available. TERATOGENIC EFFECTS :Not available. DEVELOPMENTAL TOXICITY :Not available. Repeated or prolonged exposure is not known to aggravate medical condition |
| Hazard Statements |
H300 + H310 + H330 Fatal if swallowed, in contact with skin or if inhaled. H410 Very toxic to aquatic life with long lasting effects. |
| P280 Wear protective gloves.P305 + P351 + P338 | Wear eye protection/ face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. |
| Precautionary statements - response |
P260 Do not breathe dust/ fume/ gas/ mist/ vapors/ spray. P262 Do not get in eyes, on skin, or on clothing. P273 Avoid release to the environment. P280 Wear protective gloves/ protective clothing. P302 + P352 + P310 IF ON SKIN: Wash with plenty of water. Immediately call a POISON CENTER/ doctor. P304 + P340 + P310 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER/ doctor. |
| Supplemental Hazard Statements | None |
| Other hazards | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
| General advice | First aiders need to protect themselves. Show this material safety data sheet to the doctor in attendance. |
| If inhaled | After inhalation fresh air. Immediately call in physician. If breathing stops: immediately apply artificial respiration, if necessary also oxygen. |
| Eye Contact | After eye contact: rinse out with plenty of water. Remove contact lenses. |
| Swallowed | If swallowed: give water to drink (two glasses at most). Seek medical advice immediately. In exceptional cases only, if medical care is not available within one hour, induce vomiting (only in persons who are wide awake and fully conscious), administer activated charcoal (20 - 40 g in a 10% slurry) and consult a doctor as quickly as possible. |
| Skin Contact | In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower. Call a physician immediately. |
| Serious Skin Contact: | Wash with a disinfectant soap and cover the contaminated skin with an anti-bacterial cream. Seek medical attention. |
| Inhalation | If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention. Serious Inhalation: Not available. |
| Ingestion | Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Loosen tight clothing such as a collar, tie, belt or waistband. Get medical attention if symptoms appear. Serious Ingestion: Not available. |
| Notes to Physician | Treat symptomatically |
| Most important symptoms and effects, both acute and delaye | The most important known symptoms and effects are described in the labelling |
| Flammability | May be combustible at high temperature. |
| Auto-Ignition Temperature | 363°C (685.4°F) |
| Flash Point |
CLOSED CUP Higher than 93.3°C (200°F). OPEN CUP 198.89°C (390°F) - 218.33 C (425 F). |
| Flammable Limits | Not available. |
| Products of Combustion | These products are carbon oxides (CO, CO2). Fire Hazards in Presence of Various Substances: Slightly flammable to flammable in presence of heat. Non-flammable in presence of shocks. Explosion Hazards in Presence of Various Substances: Risks of explosion of the product in presence of mechanical impact: Not available. Risks of explosion of the product in presence of static discharge: Not available. Fire Fighting Media and Instructions: SMALL FIRE: Use DRY chemical powder. LARGE FIRE: Use water spray, fog or foam. Do |
| Suitable extinguishing media | Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. |
| Unsuitable extinguishing media | For this substance/mixture no limitations of extinguishing agents are given. |
| Special hazards arising from the substance or mixture | Carbon oxides Zinc/zinc oxides Not combustible. Ambient fire may liberate hazardous vapours. |
| Further information | Suppress (knock down) gases/vapors/mists with a water spray jet. Prevent fire extinguishing water from contaminating surface water or the ground water system. |
|
Hazardous combustion products |
Fire may cause the evolution of Sulphur oxides, nitrogen oxides. |
| Advice for firefighters | Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing. |
| Protective Equipment | Use personal protective equipment. |
| Specific Hazards Arising from the Chemical |
Has a fire-promoting effect due to the release of oxygen. Ambient fire may liberate hazardous vapours. |
| Personal precautions, protective equipment and emergency procedures | Advice for non-emergency personnel: Avoid generation and inhalation of dusts in all circumstances. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert. |
|
Small Spill Large Spill |
Absorb with an inert material and put the spilled material in an appropriate waste disposalIf the product is in its solid form: Use a shovel to put the material into a convenient waste disposal container. If the product is in its liquid form: Absorb with an inert material and put the spilled material in an appropriate waste disposal. Finish cleaning by spreading water on the contaminated surface and allow to evacuate through the sanitary system. |
| Personal Protection | Advice for non-emergency personnel: Avoid inhalation of dusts. Evacuate the danger area, observe emergency procedures, consult an expert. Advice for emergency responders: Protective equipment see section 8. |
| Enviromental Precaution | Do not let product enter drains. |
|
Methods and materials for Containment and cleaning |
Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions (see sections 7 and 10). Take up carefully. Dispose of properly. Clean up affected area. Avoid generation of dusts. |
| Handling | Keep away from heat. Keep away from sources of ignition. Keep away from combustible material.. Empty containers pose a fire risk, evaporate the residue under a fume hood. Ground all equipment containing material. Do not ingest. Do not breathe dust. Wear suitable protective clothing. In case of insufficient ventilation, wear suitable respiratory equipment. If ingested, seek medical advice immediately and show the container or the label. Avoid contact with skin and eyes. Keep away from incompatibles such as reducing agents, combustible materials, organic materials, metals |
| Storage | Keep container tightly closed. Keep container in a cool, well-ventilated area. Sensitive to light. Store in light-resistant containers. Air Sensitive |
| Advice on safe handling | Work under hood. Do not inhale substance/mixture. |
| Advice on protection against fire and explosion | Keep away from open flames, hot surfaces and sources of ignition.Take precautionary measures against static discharge |
| Hygiene measures | Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance. |
| Precautions | Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk, evaporate the residue under a fume hood. Ground all equipment containing material. Do not ingest. Do not breathe gas/fumes/ vapor/spray. Wear suitable protective clothing. If ingested, seek medical advice immediately and show the container or the label. Avoid contact with skin and eyes. Keep away from incompatibles such as oxidizing agents. |
| Storage conditions | Tightly closed. Dry. Keep in a well-ventilated place. Keep locked up or in an area accessible only to qualified or authorized persons. |
| Storage class | Storage class (TRGS 510) 6.1B Non-combustible, acute toxic Cat. 1 and 2 / very toxic hazardous materials |
| Specific end use(s) | Apart from the uses mentioned in section 1.2 no other specific uses are stipulated |
| Advice on general occupational hygiene | Advice on safe handling Observe label precautions. Change contaminated clothing. Wash hands after working with substance. |
| Engineering Control | Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors below their respective threshold limit value. Ensure that eyewash stations and safety showers are proximal to the work-station location. |
| Personal Protection | Splash goggles, Lab coat, Gloves.Personal Protection in Case of a Large Spill: Splash goggles, Full suit, Boots, Gloves. Suggested protective clothing might not be sufficient; consult a specialist BEFORE handling this product. Exposure Limits: Not available. |
| Eye/face protection | Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Safety glasses |
| Body Protection | Protective clothing |
| Skin protection | This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de). Full contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested:KCL 741 Dermatril® L This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de). Splash contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested:KCL 741 Dermatril® L |
| Respiratory protection | Recommended Filter type Filter B-(P3) The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented. |
| Other Protection Measure | Handle in accordance with good industrial hygiene and safety practice. |
| Control of environmental exposure | Do not let product enter drains. |
Gloves Suit
| Physical state | Solid Slabs |
| Colour | White |
| Odour | No data available |
| Taste | Not available. |
| Molecular Weight | 117,42 g/mol |
| Odor Threshold | Not Applicable |
| pH | Not Applicable |
| Melting Point | 55-65 °C - (ECHA), (Lit.) |
| Boiling Point | NA |
| Critical Temperature | Not available. |
| Flash Point | NA |
| Evaporation Rate | Not Applicable |
| Flammability (solid, gas) | The product is not flammable. |
| Explosive limits | No Data Available |
| Upper/lower flammability or explosive limits | No data available |
| Autoignition temperature | The substance or mixture is not classified as self heating. |
| Decomposition temperature | No data available |
| Vapour pressure | No Data Available |
| Density | 1,85 g/cm3 at 25 °C - lit. |
| Vapour Density | NA |
| Volatility | Not available. |
| Odor Threshold | Not available |
| Specific Gravity | 0.895 (Water = 1) |
| Partition coefficient | No data available |
| Explosive properties | None |
| Water Solubility | 0,0047 g/l at 20 °C |
| Ignition temperature | No information available. |
| Reactivity | No data available |
| Chemical Stability | The product is chemically stable under standard ambient conditions (room temperature) . |
| Instability Temperature | Not available. |
| Conditions of Instability | Excess heat |
| Possibility of hazardous reactions | Generates dangerous gases or fumes in contact with Acids A risk of explosion and/or of toxic gas formation exists with the following substancesCarbon dioxide (CO2) Risk of explosion with: magnesium Risk of ignition or formation of inflammable gases or vapours with: Fluorine Violent reactions possible with: Strong oxidizing agents |
| Conditions to avoid | no information available |
| Incompatibility with various substances | Reactive with oxidizing agents. |
| Corrosivity | Special Remarks on Reactivity: Air and light sensitive. On exposure to air, especially when impure, it oxidizes and acquires a yellow to brown color and rancid odor. Also incompatible with perchloric acid, and powdered aluminum. |
| Special Remarks on Corrosivity | Not available. |
| Polymerization | Will not occur |
| Hazardous Polymerization | In the event of fire: see section 5 |
| Routes of Entry | Absorbed through skin. Eye contact. |
| Acute toxicity | No data available Symptoms: Possible symptoms:, mucosal irritations Dermal: No data available |
| Toxicity to Animals | Acute oral toxicity (LD50): 25000 mg/kg [Rat]. |
| Skin corrosion/irritation | Skin - Rabbit Result: No skin irritation (OECD Test Guideline 404) |
| Serious eye damage/eye irritation | Eyes - Rabbit Result: No eye irritation (OECD Test Guideline 405) |
| Respiratory or skin sensitization | Maximization Test - Guinea pig Result: Not a skin sensitizer. |
| Serious eye damage/eye irritation | Remarks: Mixture causes serious eye damage. |
| Rout Of Entry | Inhalation. Ingestion. |
| Toxicity to Animal | WARNING THE LC50 VALUES HEREUNDER ARE ESTIMATED ON THE Acute oral toxicity (LD50) 689 mg/kg [Rat]. |
| Toxic Effects on Human | May cause damage to the following organs: upper respiratory tract. Other Toxic Effects on Humans: Hazardous in case of skin contact (irritant, sensitizer), of ingestion, of inhalation (lung irritant, lung sensitizer). |
| Germ cell mutagenicity | Maximization Test - Guinea pig Result: Not a skin sensitizer. |
| Reproductive toxicity | No data available |
| Specific target organ toxicity - single exposure | No data available |
| Special Remarks on other Toxi Effects on Humans: |
Acute Potential Health Effects: Skin: Causes skin irritation. May cause skin sensitization, an allergic reation, which becomes evident upon re-exposure to this material. Eyes: Causes eye irritation. Ingestion: Causes gastrointestinal (digestive) tract irritation with nausea, vomiting, and diarrhea. May be harmful if swallowed. Inhalation: Causes respiratory tract irritation. May cause chemical pneumonitis and pulmonary edema, inflammation, edema of bronchi and larynx. Chronic Potential Health Effects: Repeated or prolonged skin exposure may cause allergic reactions in sensitive individuals. Repeated or prolonged exposure by inhalation may affect respiration and metabolism. |
| Additional Information | Endocrine disrupting properties |
| Assessment | The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. |
| Endocrine disrupting properties | The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. RTECS: DK2625000 burning sensation, Cough, wheezing, laryngitis, Shortness of breath, Headache, Nausea, Vomiting, Damage to the eyes. To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. Stomach - Irregularities - Based on Human Evidenc |
| Other Toxic Effects on Humans | Slightly hazardous in case of skin contact (irritant, permeator), of ingestion, of inhalation. Special Remarks on Toxicity to Animals: Not available. Special Remarks on Chronic Effects on Humans: Human: passes the placental barrier, detected in maternal milk. May cause cancer based on animal test data. No human data found. May affect genetic material (mutagenic). Special Remarks on other Toxic Effects on Humans: Acute Potential Health Effects: Skin: Causes skin irritation. Eyes: May cause eye irritation. Ingestion: May cause digestive tract irritation. It is expected to be a low hazard for usual industrial handling. Inhalation: May cause respiratory tract irritation. It is expected to be a low hazard to usual industrial handling. Note: According the Registery of Toxic Effects of Chemicals, when Oleic acid was administered to rats and mice through intravenous injection, behavior and respiration were affected. |
| Persistence and degradability | No data available |
| Toxicity | Mixture No data available |
| Toxicity to fish | static test NOEC - Oryzias latipes (Orange-red killifish) - 0,31 mg/l - 96 h (OECD Test Guideline 203) static test LC50 - Oryzias latipes (Orange-red killifish) - 1,038 mg/l - 96 h (OECD Test Guideline 203) |
| Toxicity to daphnia and other aquatic invertebrates | static test EC50 - Daphnia magna (Water flea) - 3,35 mg/l - 48 h (OECD Test Guideline 202) |
| Toxicity to algae | static test EC50 - Pseudokirchneriella subcapitata - 0,322 mg/l - 72 h (OECD Test Guideline 201) static test NOEC - Pseudokirchneriella subcapitata - 0,09 mg/l - 72 h (OECD Test Guideline 201) |
| Eco Toxicity | Not Available |
| COD and BOD 5 | Not Available |
| Products Biodegradation | Possibly hazardous short term degradation products are not likely. However, long term degradation products may arise. Toxicity of the Products of Biodegradation: The product itself and its products of degradation are not toxic. Special Remarks on the Products of Biodegradation: Not available. |
| Mobility in soil | No Information available |
| Biodegradability | Result: - Not readily biodegradable. Remarks: The methods for determining the biological degradability are not applicable to inorganic substances. |
| Results of PBT and vPvB assessment | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
| Endocrine disrupting properties | The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher |
| Assessment | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
| Other adverse effects | No data available |
| Product | See www.retrologistik.com for processes regarding the return of chemicals and containers, or contact us there if you have further questions. |
| Waste Disposal | Waste must be disposed of in accordance with federal, state and local environmental control regulations. |
| Waste treatment Method | See www.retrologistik.com for processes regarding the return of chemicals and containers, or contact us there if you have further questions. |
| UN number | ADR/RID: 1713 IMDG: 1713 IATA: 1713 |
| UN proper shipping name |
ADR/RID: ZINC CYANIDE IMDG: ZINC CYANIDE IATA: Zinc cyanide |
| Transport hazard class(es) |
ADR/RID: 6.1 IMDG: 6.1 IATA: 6.1 |
| Packaging group | ADR/RID: I IMDG: I IATA: I |
| Environmental hazards | ADR/RID: yes IMDG Marine pollutant: yes IATA: no |
| Federal and State Regulations | Rhode Island RTK hazardous substances: Oleic acid Pennsylvania RTK: Oleic acid TSCA 8(b) inventory: Oleic acid |
| Safety, health and environmental regulations/legislation specific for the substance or mixture | This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006 |
| National legislation | Seveso III: Directive 2012/18/EU of the European Parliament and of the Council on the control of major-accident hazards involving dangerous substances. |
| DSCL (EEC) | R8- Contact with combustible material may cause fire. R20/22- Harmful by inhalation and if swallowed. R36/37/38- Irritating to eyes, respiratory system and skin. R42/43- May cause sensitization by inhalation and skin contact. S22- Do not breathe dust. S24- Avoid contact with skin. S26- In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S37- Wear suitable gloves. |
| Other regulations | Observe work restrictions regarding maternity protection in accordance to Dir 92/85/EEC or stricter national regulations where applicable. Take note of Dir 94/33/EC on the protection of young people at work. |
| Chemical Safety Assessment | Other regulations |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and weassume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |
