Hydrogen Peroxide 35%
- Part number
- RXSOL-15-1630-035
- Category
- GOLD REFINING CHEMICAL
- Brand
- RXSOL
Overview
Hydrogen peroxide is a chemical compound with the formula H2O2. It is the simplest peroxide (a compound with an oxygen-oxygen single bond) and in its pure form is a colorless liquid, slightly more viscous than water. Highly purified for Gold refining Purpose.
Technical specifications
|
Spec Item |
35%H2O2 |
50%H2O2 |
|
pH |
1.20~2.50 |
1.20~2.50 |
|
Purity wt% |
35~36 |
50~51 |
|
Specific Gravity 20/4℃ |
1.130min |
1.195min |
|
Free Acid as h2so4 wt% |
0.05max |
0.05max |
|
Residual wt% |
0.20max |
0.20max |
|
Stability % |
97.0min |
97.0min |
Applications
Hydrogen Peroxide has many use including House Hold, Domestic. Agriculture, Textile, Industries, Medical and West water Treatment.
#HydrogenPEROXIDE_Oman
#HydrogenPEROXIDE_Sharjah
#HydrogenPEROXIDE_NaviMUMBAI
#HydrogenPEROXIDE_Gandhidham
#HydrogenPEROXIDE_ParadipVIZAG
Dosage and directions
House Hold : One of the most common uses of hydrogen peroxide is as a disinfectant. Spray it on surfaces like kitchen counter top and wipe with a clean rag. It can be used as a mouthwash too. You have to dilute the chemical with water and use it for rinsing the mouth. This mouthwash is also said to whiten teeth. Ensure that you do not swallow the liquid, while rinsing.
It can also be used to wash vegetables and fruits, in order to get rid of germs and pesticides. Add some hydrogen peroxide to a bowl full of water (you may also add a few pinches of salt). Soak the veggies and fruits for some time. Remove them and rinse with cold water, before use.This chemical is also used to purify water in swimming pools.
Agriculture : Farmers use it as an insecticide. They spray diluted form of this chemical, on plants, so that the pests and weeds get killed, without causing harm to the plants. Its also used for watering plants. Mix an ounce of this chemical with a quart of water and use it on plants. Apart from boosting the level of oxygen in the soil, this mixture is also said to prevent root rot. Some people soak seeds in it, after diluting it with water. It is said that this will fasten the process of germination. For this purpose have to mix 1.5 teaspoons of hydrogen peroxide in a cup of water.
Textile: It acts as a stain remover. Put 1 spoon tea in 1 bucket water and let it sit for a while. After that, rinse the stains with water and soap.
As it has bleaching property, it is used as a bleach too.
IIndustrial :
Reduced Sulfur Compound Treatment for Refinery Wastewater
Sulfur compounds, such as hydrogen sulfide, thiosulfates and mercaptans, can present serious refinery wastewater problems. Hydrogen peroxide treatment is a cost effective way to treat these reduced sulfur species.
Supplemental Dissolved Oxygen to Reduce BOD and COD
Hydrogen peroxide has been used to reduce BOD and COD in refinery wastewater Supply of Supplemental Dissolved Oxygen (DO) when biological treatment systems experience temporary overloads or equipment failure.Predigestion of wastewater which contains moderate to high levels of compounds that are toxic, inhibitory or recalcitrant to biological treatment.As indicated by these examples, hydrogen peroxide can be used as a stand-alone treatment or as an enhancement to existing physical or biological treatment processes, depending on the situation.
Wastewater Pretreatment
Hydrogen peroxide is one of the most versatile, dependable and environmentally compatible oxidizing agents. The relative safety and simplicity of its use as an oxidizing agent has led to the development of a number of applications in refinery wastewater systems.
Characteristics and notes
Appearance :::--- light blue; colorless in solution
Odor :::--- sharpBoiling point :::--- 150.2 °C, 423 K, 302 °F
Solubility in water :::---Miscible
Solubility :::--- soluble in ether, alcohol insoluble in petroleum ether
Viscosity :::---1.245 cP (20 °C)
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | Hydrogen Peroxide Food Grade 35% |
| Part Number | RXSOL-15-1630-035 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Mumbai , Chennai, Vizag, Kolkata, UAE , OMAN , CANADA and KENYA
| Phone | +91 22 20871200 - 1400 |
| Fax | +91 22 27612100 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com | |
| Website | www.rxmraine.com |
| Chemical Name | CAS | EC number | Weight |
| Hydrogen Peroxide | 7722-84-1 | 231-765-0 | >= 35 - < 40 % |
| Signal Word | Danger |
| Hazard Statements | H272 May intensify fire; oxidizer. H302 Harmful if swallowed. H314 Causes severe skin burns and eye damage. H335 May cause respiratory irritation. H412 Harmful to aquatic life with long lasting effects. |
| Precautionary statements | P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P273 Avoid release to the environment. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection. P301 + P312 IF SWALLOWED: Call a POISON CENTER/ doctor if you feel unwell. P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. |
| Classification of the substance or mixture | Not a hazardous substance or mixture according to Regulation (EC) No 1272/2008. |
| Other hazards | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
| Supplemental Hazard Statements | None |
| General advice | First aiders need to protect themselves. Show this material safety data sheet to the doctor in attendance. |
| If inhaled | After inhalation: fresh air. Call in physician. |
| Eye Contact | After eye contact: rinse out with plenty of water. Immediately call in ophthalmologist. Remove contact lenses. |
| Swallowed | After swallowing: make victim drink water (two glasses at most), avoid vomiting (risk of perforation). Call a physician immediately. Do not attempt to neutralise. |
| Skin Contact | In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower. Call a physician immediately. |
| Inhalation | Remove patient to fresh air, keep warm and at rest and get medical assistance in necessary. |
| Ingestion | Rinse mouth with water. Do not induce vomiting. Never give anything by mouth to an unconscious person. Call a doctor or Poison Control Center immediately. |
| Most important symptoms and effects, both acute and delaye | The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11 |
| Indication of any immediate medical attention and special treatment needed | No data available |
| Flammability | May be combustible at high temperature. |
| Suitable extinguishing media | Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. |
| Unsuitable extinguishing media | For this substance/mixture no limitations of extinguishing agents are given. |
| Special hazards arising from the substance or mixture | Nature of decomposition products not known. Not combustible. Has a fire-promoting effect due to release of oxygen. Ambient fire may liberate hazardous vapours. |
| Further information | Prevent fire extinguishing water from contaminating surface water or the ground water system. |
|
Hazardous combustion products |
Fire may cause the evolution of Sulphur oxides, nitrogen oxides. |
| Advice for firefighters | Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing. |
| Protective Equipment | Use personal protective equipment. |
| Specific Hazards Arising from the Chemical |
Has a fire-promoting effect due to the release of oxygen. Ambient fire may liberate hazardous vapours. |
| Personal precautions, protective equipment and emergency procedures | Advice for non-emergency personnel: Do not breathe vapors, aerosols. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert. For personal protection see section 8 |
| Spillage | Oxidizing material. Stop leak if without risk. Avoid contact with a combustible material (wood, paper, oil, clothing...). Keep substance damp using water spray. Do not touch spilled material. Prevent entry into sewers, basements or confined areas dike if needed. Eliminate all ignition sources. Call for assistance on disposal. |
| Personal Protection | Advice for non-emergency personnel: Avoid inhalation of dusts. Evacuate the danger area, observe emergency procedures, consult an expert. Advice for emergency responders: Protective equipment see section 8. |
| Enviromental Precaution | Do not let product enter drains. |
|
Methods and materials for containment and cleaning |
Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions (see sections 7 and 10). Take up with liquid-absorbent material (e.g. Chemizorb® ). Dispose of properly. Clean up affected area. |
| Advice on safe handling | Keep away from open flames, hot surfaces and sources of ignition. |
| Storage stability | Recommended storage temperature 2 - 8 °C Light sensitive. Handle and open container with care. |
| Incompatible materials | Keep away from alkalis, strong oxidizing agents and metals. Provide containment walls of adequate capacity to hold any accidental spills. |
| Hygiene measures | Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance. For precautions see section 2.2. |
| Precautions for safe handling | For precautions see section 2.2. |
| Conditions for safe storage, including any incompatibilities | Store the container tightly closed in a dry, cool and well-ventilated place. Store apart from foodstuff containers or incompatible materials. |
| Storage conditions | Tightly closed. Do not store near combustible materials. |
| Storage class | Storage class (TRGS 510): 5.1B: Oxidizing hazardous materials |
| Specific end use(s) | Apart from the uses mentioned in section 1.2 no other specific uses are stipulated |
| Advice on general occupational hygiene | Advice on safe handling Observe label precautions. Change contaminated clothing. Wash hands after working with substance. |
| Requirements for storage | Keep in cool and store under shade. |
| Occupational Exposure limit values | No specific occupational exposure limit has been established. |
| Exposure controls | No specific additional engineering controls are required. Provide good natural or artificial ventilation. |
| Engineering Control | Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit. |
| Eye/face protection | Tightly fitting safety goggles |
| Body Protection | Protective clothing. |
| Skin protection | This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de). Full contact Material: Latex gloves Minimum layer thickness: 0,6 mm Break through time: > 480 min Material tested:Lapren® (KCL 706 / Aldrich Z677558, Size M) This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de). Splash contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: > 480 min Material tested:KCL 741 Dermatril® L |
| Respiratory protection | Required when vapours/aerosols are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system. Recommended Filter type: Filter type ABEK The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented. |
| Other Protection Measure | Handle in accordance with good industrial hygiene and safety practice. |
| Control of environmental exposure | Do not let product enter drains. |
| Thermal hazards | No data available |
| Physical state | Liquid |
| Colour | Colorless |
| Odour | No data available |
| Odor Threshold | Not Applicable |
| pH | ca.2 - 4 at 20 °C |
| Melting Point | 24 °C |
| Boiling Point | ca.110 °C at 1.013 hPa |
| Flash Point | Not Applicable |
| Evaporation Rate | Not Applicable |
| Flammability (solid, gas) | No data available |
| Explosive limits | No Data Available |
| Upper/lower flammability or explosive limits | No data available |
| Autoignition temperature | No data available |
| Decomposition temperature | > 100 °C |
| Vapour pressure | 1,13 g/cm3 at 20 °C |
| Density | Not Applicable |
| Vapour Density | No Data Available |
| Freezing point | No data available |
| Specific Gravity | No data available |
| Partition coefficient | No data available |
| Explosive properties | No data available |
| Solubility | 20 °C soluble |
| Ignition temperature | No information available. |
| Particle characteristics | No data available |
| Viscosity dynamic | 2,3 mPa.s at 15 °C |
| Reactivity | No data available |
| Stability | heat-sensitive Sensitivity to light Contains the following stabilizer(s): Disodium pyrophosphate (0,015 %) phosphoric acid (0,01 %) Ammonium nitrate (0,006 %) |
| Possibility of hazardous reactions | Risk of explosion with: Risk of ignition or formation of inflammable gases or vapours with: hydrazine and derivatives hydrides combustible substances Ether anhydrides Oxidizing agents Organic Substances peroxi compounds permanganates organic solvent organic nitro compounds Brass Alkali metals alkali salts Alkaline earth metals Metals metallic oxides Metallic salts nonmetals nonmetallic oxides Aldehydes Alcohols Amines Ammonia Acids strong alkalis Acetaldehyde Acetone Activated charcoal anilines Lead Powdered metals acetic acid Acetic anhydride Potassium iodides potassium permanganate Methanol sodium oils phosphorus Oxides of phosphorus conc. sulfuric acid Heavy metals silver in powder form alkali hydroxides with Heavy metals vinyl acetate with Catalyst Exothermic reaction with: alkali hydroxides Metals Nitric acid zinc oxide Metallic salts phenol with metal catalysts |
| Conditions to avoid | Heating. |
| Incompatible materials | Lead, bronze, Iron, Copper, Brass, silver, Metals, metal alloys |
| Hazardous decomposition products | In the event of fire: see section 5 |
| Acute toxicity | LD50 Oral - Rat - 1.193 - 1.270 mg/kg Acute toxicity estimate Inhalation - 4 h - > 20 mg/l - vapor(Calculation method) LD50 Dermal - Rabbit - male and female - > 2.000 mg/kg (US-EPA) |
| Skin corrosion/irritation | Causes severe burns. Classified according to Regulation (EU) 1272/2008, Annex VI (Table 3.1/3.2) |
| Serious eye damage/eye irritation | Causes serious eye damage. |
| Respiratory or skin sensitization | Sensitisation test: - Guinea pig Result: negative Remarks: (External MSDS) |
| Toxic Effects on Human | May cause damage to the following organs: upper respiratory tract. Other Toxic Effects on Humans: Hazardous in case of skin contact (irritant, sensitizer), of ingestion, of inhalation (lung irritant, lung sensitizer). |
| Germ cell mutagenicity | Method: OECD Test Guideline 474 Species: Mouse - male and female - Bone marrow Result: negative |
| Reproductive toxicity | Presumed human reproductive toxicant |
| Specific target organ toxicity - single exposure | Inhalation - May cause respiratory irritation. - Respiratory Tract |
| Additional Information | RTECS: AF3675000 Gastrointestinal disturbance To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. After uptake of large quantities: muscular symptoms agitation Convulsions Headache Tremors Nausea psychoses |
| Endocrine disrupting properties | The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. Dizziness, Unconsciousness, Diarrhea, Nausea, Vomiting, Headache, Convulsions, muscle twitching, insomnia, shock, Irritation and corrosion, conjunctivitis Risk of serious damage to eyes. Systemic effects: Headache Dizziness Nausea Vomiting Diarrhea insomnia muscle twitching Convulsions Unconsciousness shock Other dangerous properties can not be excluded. Handle in accordance with good industrial hygiene and safety practice. |
| Persistence and degradability | No data available |
| Toxicity | No data available |
| Bioaccumulative potential | No data available |
| Toxicity to fish | Semi-static test LC50 - Pimephales promelas (fathead minnow) - 16,4 mg/l - 96 h (US-EPA) |
| Toxicity to daphnia and other aquatic invertebrates | Semi-static test LC50 - Daphnia pulex (Water flea) - 2,4 mg/l - 48 h (US-EPA) |
| Toxicity to algae | Static test ErC50 - Skeletonema costatum (marine diatom) - 1,38 mg/l - 72 h Remarks: (ECHA) static test NOEC - Skeletonema costatum (marine diatom) - 0,63 mg/l - 72 h Remarks: (ECHA) |
| Toxicity to bacteria | Static test EC50 - activated sludge - 466 mg/l - 30 min (OECD Test Guideline 209) static test EC50 - activated sludge - > 1.000 mg/l - 3 h (OECD Test Guideline 209) |
| Products Biodegradation | The methods for determining the biological degradability are not applicable to inorganic substances. |
| Mobility in soil | No Information available |
| Results of PBT and vPvB assessment | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
| Endocrine disrupting properties | The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. |
| Other adverse effects | No data available |
| Disposal methods | The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems. |
| Contaminated packaging | Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials. |
| Waste treatment Method | See www.retrologistik.com for processes regarding the return of chemicals and containers, or contact us there if you have further questions. |
| UN number | ADR/RID: 2014 IMDG: 2014 IATA: 2014 |
| UN proper shipping name |
ADR/RID: HYDROGEN PEROXIDE, AQUEOUS SOLUTION IMDG: HYDROGEN PEROXIDE, AQUEOUS SOLUTION IATA: HYDROGEN PEROXIDE, AQUEOUS SOLUTION |
| Transport hazard class(es) | ADR/RID: 5.1 (8) IMDG: 5.1 (8) IATA: 5.1 (8) |
| Packaging group | ADR/RID: II IMDG: II IATA: - |
| Environmental hazards | ADR/RID: No IMDG: No IATA: No |
| Special precautions for user | Tunnel restriction code : (C/E) |
| Further information | Not classified as dangerous in the meaning of transport regulations. |
| Transport in bulk according to IMOinstruments | No data available |
| Inventory status | Components are on the following inventories: Polymaleic acid: - US TSCA, Canadian DSL, EU EINECS, Australian AICS, Korean, Philippine PICCS and Chinese Xi irritant R 36/38 Irritant to eyes & skin R 41 Risk of serious damage to eyes S24/25 Avoid contact with skin and eyes S26/28 In case of contact eyes & skin, rinse with plenty water and seek medical advice Section 312/313: Not listed. Not listed under California proposition 65. |
| Safety, health and environmental regulations/legislation specific for the substance or mixture | This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006 |
| Safety, health and environmental regulations specific for the product in question | European Inventory of Existing Commercial Chemical Substances (EINECS) -Listed.EC Inventory Listed. United States Toxic Substances Control Act (TSCA) Inventory- Listed. China Catalog of Hazardous chemicals 2015 Not- Listed. New Zealand Inventory of Chemicals (NZIoC)Listed. PICCS -Listed. Vietnam National Chemical Inventory -Listed. IECSC Listed. Korea Existing Chemicals List (KECL) -Listed. |
| Authorisations and/or restrictions on use | Regulation (EU) 2019/1148 on the marketing and use of explosives precursors : hydrogen peroxide Regulation (EU) 2019/1148 on the marketing and use of explosives precursors : ammonium nitrate |
| Other regulations | Observe work restrictions regarding maternity protection in accordance to Dir 92/85/EEC or stricter national regulations where applicable. Take note of Dir 94/33/EC on the protection of young people at work. |
| Chemical Safety Assessment | A Chemical Safety Assessment has been carried out for this substance. |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and weassume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |
Availability
Hydrogen Peroxide 35% Exporter Importer and supplier in India UAE Oman, Nairobi, Canada. Pure Hydrogen Peroxide supplier in RUWI BARKA, Muscat Soha Oman, Fujairah, Sharjah, Ajman, Abudhbai, Dubai, Mumbai, Surat GIDC, Gandhidham, Chennai, Kolkata, Visakhapatnam, AndhraPradesh, Ennore, Paradip
