Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
Your shopping cart is empty.
RXSOL Boat Hull Cleaner strength resulting one step cleaning either its Gel Formula can be brush on or its liquid formula can be sprayed off on the entire boat or Hull area to remove sea growth and lime deposits. Its balance acidic formula immediately starts its function and Safe on aluminium boats and pontoons; Biodegradable, Non-flammable.
| Appearance | Clear liquid |
| Color | Colorless |
| Odor | Odorless |
| Initial Boiling Point | <240oC |
| Final Boiling Point | >262oC |
| Flash Point | 85oC |
| Autoignition Temperature | >220oC |
| Lower Explosion Limit (vol %) | <0.6% (v/v) |
| Upper Explosion Limit (vol %) | >5.5% (v/v) |
| Vapour Pressure | <0.0003 kPa at 20oC |
| Relative vapor density (air= 1) | <0.01 |
| Aromatics | < 0.4% |
| Specific Gravity (gr/cm3) | 0.81 at 200C |
| Solubility | Soluble |
| pH (in 1% dispersion) | 7 |
| Pour point (at 0°C) | - 30 |
| Viscosity (at 0°C) (cSt) | 3 |
TECHNICAL PROPERTIES:
Composition: Liquid
Appearance: Clear Colorless to charasteristic
Recommended Concentrations: 50-100% by volume
Recommended Temperatures: Ambient
The use of Disodium phosphate treatment in BOILER converts calcium hardness into soft, non-adherent sludge that is easily removed by blowdown.
Sampling And Testing
A sample of boiler water should be drawn for analysis daily. The sample should always be taken from the same point after blow down, cooled and tested immediately. Follow the Rxsol Hardness Test Kit instructions and fill the Boiler Water Log Form according to result results. It is important that regular testing is carried out to ensure levels of treatment are correct.
Physical Properties :
Appearance :White powder
Corrosive action :NonE
pH 1% solution :8.8
Flash point :None
Phosphate/pH relationship recommended to control boiler corrosion. Different forms of phosphate consume or add caustic as the phosphate shifts to the proper form. For example, addition of monosodium phosphate consumes caustic as it reacts with caustic to form disodium phosphate in the boiler water according to the following reaction:
| NaH2PO4 | + | NaOH | ® | Na2HPO4 | + | H2O |
| monosodium phosphate | sodium hydroxide | disodium phosphate | water |
Conversely, addition of trisodium phosphate adds caustic, increasing boiler water pH:
| Na3PO4 | + | H2O | ® | Na2HPO4 | + | NaOH |
| trisodium phosphate | water | disodium phosphate |
sodium hydroxide |
The products that we manufacture and supply are as per the following standards:
Distilled Water, Battery Distilled Water, Windshield Wiper Fluid, Distilled Water For Home, Industrial Water, SPA & Saloon Distilled Water, Radiator Coolant Water, Laboratory Water, Medicated Water, Aquarium Water and Saloon Distilled Water.
12.5% wt. SODIUM HYPOCHLORITE - EXTRA - PURE
| Parameters | Specification Range | Typical |
|
Sodium Hypochlorite as NaOCl (%wt) |
12.5 - 13.2 | 13.0 |
| Available Chlorine (%wt) | 11.9 - 12.6 | 12.4 |
| Available Chlorine (%vol) | 14.3 - 15.3 | 15.0 |
| Available Chlorine grams/liter | 143 - 153 | 150 |
| Excess Caustic (%wt) | 0.25 - 0.80 | 0.30 |
| Specific Gravity @ 60°F | 1.197 - 1.220 | 1.210 |
| pH | 12.0 - 13.0 | 12.50 |
| Iron (Fe) ppm | <0.5 | 0.05 |
| Nickel (Ni) ppm | <0.2 | 0.02 |
| Copper (Cu) ppm | <0.2 | 0.05 |
| Mercury (Hg) ppb | 0.001 - 0.003 | 0.002 |
| Sodium Chloride (NaCl)% | <15.0 | 12.5 |
Appearance: Clear greenish-yellow liquid miscible in any proportion with water.
This product meets the requirements of NSF standard 60 for drinking water.
We are marine chemical supplier since 1996.These Marine Chemicals include different sets of products such as Tank Cleaners, Maintenance Chemicals, Cooling Water Treatment Chemicals, Boiler Water Treatment Chemicals, Fuel Additives, etc.
Oman Chemical is leading one Largest Supplier, Manufacture a
Oman Chemical is leading one Largest Supplier, Manufacture a
