Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
Your shopping cart is empty.
A high strength commercial descaling fluid to attack stubborn lime scale caking inside dishwashing machines and other stainless steel equipment within the commercial catering environment. Descaler must be diluted before use using a 30ml 5lt pelican pump.
Dishwashers/Glass washers
• Switch off the electronic wall mounted dosing equipment (if applicable).
• Dilute Descaler with up to 20 parts water depending on the degree of scale build up and add directly into the wash tank. For best results, heat water up to working temperature and circulate until all scale is removed.
• Drain solution, refill and rinse thoroughly with clean water. Drain again and refill with clean water.
Tea Urns
• Fill urn with water and add 10 plunges of Descaler via 30 ml dispensing pump fitted to 5lt container.
• Allow approximately 1 hour contact time. If necessary, agitate scale with green scouring pad to remove stubborn heavy scale deposits.
• Drain and rinse thoroughly with clean water.
Floors & Hard Surfaces
• If you live in a hard water area and your water supply is untreated, routine floor & hard surface cleaning may leave scale deposits that will periodically need to be removed.
• Dilute Descaler with up to 20 parts water and wash the floor or surface as you would under normal circumstances. Always rinse the floor or surface after descaling and clean again using the appropriate cleaning product.
N.B. The use of hot water will accelerate the effectiveness of Descaler.
How to clean Coffee Machine / Kettle water heater
Half fill boiler of Coffee Machine with water and boil. Unplug electrical connection and slowly add the one spoon powder contents of RXSOL-25-1052-005. Leave for just 10 minutes chemically developed RXSOL particle will dissolves hard and old lime scale deposits from surface of appliances. It extends the life of the appliance and saves running cost.
Before testing of Nitrite level, Here is some point and guideline, what you need to do. : 1 take the following readings; pH, TDS (uS), and nitrite level.and record. 2 add the Chemical your are using. 3. wait for a period of time for the sysem to circulate.
for a period of time.
If the TDS and Nitrite drop you have a leak/ unknown makeup. if the TDS stays stable and the nitrite drops you have a biological problem. Bacteria that convert nitrite to nitrate.
Solution ::: Use DI water in place of general water, And also use. Algaecide to control Bacterial growth inside water system ... http://rxmarine.com/Biocide-
| Product Properties | ||
| Appearance | Clear Colourless Liquid | Vapor Density : Heavier than air |
| Flash Point |
63°C (Closed Cup) |
Stability : Very stable understandard,.normalconditions |
| Compatibility | ||
|
Metal
Plastic |
No known effect |
Note: After use the product must always be well sealed in the drum. |
| Packaging | Order No | Size (in kgs./lts.) |
|
RXSOL-16-1077-025 |
7/25 Lts |
Chemical & Physical Properties
| Chemical Formula | CO(NH2)2 |
| CAS Number | 57-13-6 |
| Molecular Weight | 60.056 |
| Specific Gravity | 1.140 |
| pH | 6.5 - 8.5 |
| Salt-Out Temp | 62°F (18°C) |
| Colour | Clear Liquid |
| Odor | slight ammonia smell |
Typical Analysis :
| Urea 23% Nitrogen | 50% |
| Turbidity | 5 ppm |
| pH | 8.5 Max |
| Ammonia | 0.03% |
| Biuret | < 0.25% |
| Ash | 35 ppm |
| Iron | 2 ppm |
| Chloride | 10 ppm |
| Color - Max | 0 (APHA) |
| Alkalinity - wt (NH3) Max |
0.05% |
| Appreance | : | Clear Liquid |
| Odour | : | Neutral |
| pH | : | <1.0 |
| Soecific Gravity | : | More than 1 |
| Viscocity | : | 25 cps |
| Boiling Point | : | 108 °C |
| Flash Point | : | Not Applicable |
| Solubility in Water | : |
100 % in any ratio |
| General | |
| Invent Hazard Material (IMO/EU) classification | C-49 |
| Physical properties | |
| Appearance | Brown |
| Density | [g/ml] 1,0 |
| Form | Liquid |
| pH | 8-9,5 |
Features:
Excellent in-depth cleaning properties
Contains specialized patented bacterial strains forming enzymes that break down fatty acid components of grease
Safe to use on all surfaces
Environmentally friendly.
SPECIFICATION FOR SILICA GEL INDICATING (BLUE) / NON INDICATING (WHITE):
| Loss on drying : | Not more that 5% mass |
| Absorption Capacity : | 27% min on the basis of mass |
| PH : | 3.5 to 8. |
| Chlorides : | 0.05% by mass max |
| Cobalt (as CoCl2) : | 0.4 by mass max |
| Ammonium compounds (as NaH3): | 0.5% by mass max |
| Sulphates (Na2SO4) : | 0.5% by mass max |
| Packing: |
25 / 50 kgs M S drum (Smaller packing available). |
We are marine chemical supplier since 1996.These Marine Chemicals include different sets of products such as Tank Cleaners, Maintenance Chemicals, Cooling Water Treatment Chemicals, Boiler Water Treatment Chemicals, Fuel Additives, etc.
Oman Chemical is leading one Largest Supplier, Manufacture a
Oman Chemical is leading one Largest Supplier, Manufacture a
