Dibutyl Phthalate
- Part number
- RXSOL-19-1295-050
- Category
- Laundry Chemicals
- Brand
- RXSOL
Overview
Technical specifications
| PRODUCT NAME | : | DIBUTYLPHTHALATE |
| CAS number | : | 84-72-2 |
| UN number | : | |
| Formula | : | C6H4(COOC4H9)2 |
| Odour | : | ODOURLESS |
| Solubility in water | : | INSOLUBLE |
| Density | : | 1.048 at 20 oC |
| Boiling point | : | 340 oC |
| Melting point | : | -35 oC |
| Viscosity | : | 20.3 cp at 20 oC |
| Flashpoint | : | 157 oC |
| Explosive limits | : | |
| Vapour pressure | : | 0.1 mbar at 20 oC |
| Skin absorption/irritation | : | YES |
| TLV Country NL Year 1989 | : | ppm 5 mg/m3 |
| Pollution category 1994 | : | A |
Applications
USES
Dosage and directions
di-N-butyl phthalate supplier in India Mumbai, Kandla, Chennai, Vizag, Kolkata, Dubai, Sharjah - Middle East.
Characteristics and notes
| LAUNDRY CHEMICALS MANUFACTURER AND SUPPLIER in INDIA UAE OMAN |
| Detergent Powder |
| Fabric Softener |
| Liquid Bleach |
| Oxygen Bleach |
| Dry Cleaning Solvent |
| Alkaline Detergents |
| Fabric Wash |
| Spot Removers |
| Liquid Detergents |
| Bleaching Powder |
| Laundry Starch |
| Alkali Booster |
| Liquid Emulsifiers |
| Laundry Sour |
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | RXSOL-19-1295 |
| Product Type | Dibutyl Phthalate |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333 / 5555 / 9999 / 27815540 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com | |
| Website | www.rxmarine.com |
|
Chemical Name |
CAS Number |
EC Number |
Index number |
|
dibutyl phthalate |
84-74-2 |
201-557-4 |
607-318-00-4 |
Hazard description:
Information concerning particular hazards for human and environment:
R 61 May cause harm to the unborn child.
R 62 Possible risk of impaired fertility.
R 50 Very toxic to aquatic organisms.
|
After inhalation |
Supply fresh air; consult doctor in case of complaints. |
|
After skin contact |
Generally the product does not irritate the skin. |
|
After eye contact |
Rinse opened eye for several minutes under running water. |
|
After swallowing |
If symptoms persist consult doctor. |
Suitable extinguishing agents: Use fire extinguishing methods suitable to surrounding conditions.
Protective equipment: No special measures required.
Person-related safety precautions: Not required.
Measures for environmental protection: Inform respective authorities in case of seepage into water course or sewage system. Do not allow to enter sewers/ surface or ground water.
Measures for cleaning/collecting: Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Dispose contaminated material as waste according to item 13.
Handling:
Information for safe handling:
Ensure good ventilation/exhaustion at the workplace.
Information about fire - and explosion protection: Keep ignition sources away - Do not smoke. Protect against electrostatic charges.
Storage:
Requirements to be met by storerooms and receptacles: No special requirements.
Information about storage in one common storage facility: Not required.
Further information about storage conditions: Keep container tightly sealed.
Additional information about design of technical facilities: No further data; see item 7.
| Ingredients with limit values that require monitoring at the workplace: | |
| 108-38-3 m-xylene | |
|
PEL (USA) REL (USA)
TLV (USA) |
435 mg/m³, 100 ppm Short-term value: 655 mg/m³, 150 ppm Long-term value: 435 mg/m³, 100 ppm Short-term value: 651 mg/m³, 150 ppm Long-term value: 434 mg/m³, 100 ppm BEI Short-term value: 442 mg/m³, 100 ppm Long-term value: 221 mg/m³, 50 ppm Skin Short-term value: 441 mg/m³, 100 ppm Long-term value: 220 mg/m³, 50 ppm Sk; BMGV |
Additional information: The lists valid during the making were used as basis.
Personal protective equipment:
General protective and hygienic measures: Keep away from foodstuffs, beverages and feed. Immediately remove all soiled and contaminated clothing Wash hands before breaks and at the end of work. Avoid contact with the skin. Avoid contact with the eyes and skin.
Respiratory protection: In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
Protection of hands: The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves: The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.
Penetration time of glove material:
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Eye protection: Tightly sealed goggles
|
General Information |
|
|
Form |
Fluid |
|
Colour |
Colourless |
|
Odour |
Characteristic |
|
Change in condition |
|
|
Melting point/Melting range |
-47.9°C |
|
Boiling point/Boiling range |
139°C |
|
Flash point |
25°C |
| Ignition temperature | 465°C |
|
Danger of explosion |
Product is not explosive. However, formation of explosive air/vapour mixtures are possible. |
| Explosion limits: | |
| Lower | 1.7 Vol % |
| Upper | 7.6 Vol % |
| Vapour pressure at 20°C | 8 hPa |
| Density at 20°C | 0.85985 g/cm³ |
| Solubility in / Miscibility with water at 20°C | 0.2 g/l |
| Viscosity: | |
| Dynamic at 22°C | 0.62 mPas |
Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
Dangerous reactions No dangerous reactions known.
Dangerous decomposition products: No dangerous decomposition products known.
| Acute toxicity: | |||||
| LD/LC50 values relevant for classification: | |||||
|
Oral Dermal |
LD50 LC50/4 h |
5000 mg/kg (rat) 14100 mg/kg (rabbit) |
|||
| Primary irritant effect: | |||||
| on the skin | Irritant to skin and mucous membranes. | ||||
| on the eye | No irritating effect. | ||||
| Sensitization | No sensitizing effects known. | ||||
General notes: Water hazard class 2 (German Regulation) (Self-assessment): hazardous for water Do not allow product to reach ground water, water course or sewage system. Danger to drinking water if even small quantities leak into the ground.
Product:
Recommendation Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Uncleaned packaging: Recommendation: Disposal must be made according to official regulations.
| Land transport ADR/RID (cross-border) | ||
| ADR/RID class | 3 Flammable liquids. | |
| Danger code (Kemler) | 30 | |
| UN-Number | 1307 | |
| Packaging group | III | |
| Hazard label | 3 | |
| Description of goods | 1307 XYLENES | |
| Maritime transport IMDG | ||
| IMDG Class | 3 | |
| UN Number | 1307 | |
| Label | 3 | |
| Packaging group | III | |
| EMS Number | F-A,S-D | |
| Marine pollutant | No | |
| Proper shipping name | XYLENES | |
| Air transport ICAO-TI and IATA-DGR | ||
| ICAO/IATA Class | 3 | |
| UN/ID Number | 1307 | |
| Label | 3 | |
| Packaging group | III | |
| Proper shipping name | XYLENES | |
Labelling according to EU guidelines:
The product has been classified and marked in accordance with EU Directives / Ordinance on Hazardous Materials.
Risk phrases:
10 Flammable.
20/21 Harmful by inhalation and in contact with skin.
38 Irritating to skin.
Safety phrases:
2 Keep out of the reach of children.
25 Avoid contact with eyes
This information is based on our present knowledge.However, this shall not constitute a guarantee for anys pecific product features and shall not establish a legally valid contractual relationship.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
Availability
DIBUTYLPHTHALATE exporter and supplier in Mumbai, Gandhidham, Chennai, Visakhapatnam, Kolkata, Fujairah, Sharjah, Ajman, Abudhabi, Dubai, UAE, Muscat Oman, Canada BC
