Formaldehyde 4% Solution
- Part number
- RXSOL-60-1191-500
- Category
- Lab Chemical
- Brand
- RXSOL
Overview
Technical specifications
| Property Value | Color Clear |
|---|
Purity 37% (±0.5%)
| Specific gravity 1.098 | 1.114 |
|---|
Applications
Dosage and directions
Characteristics and notes
Handling
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | Formaldehyde 4% Solution |
| Product Type | RXSOL-60-6215-500 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Kolkata, Chennai, Visakhapatnam, Fujairah, Oman - Barka
| Phone | +91 22 27815540 / 41 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
| SARA 313 Component | CAS Number | Percent Comp. |
Dimension |
Exposure Limits |
| Formaldehyde, 37% | CAS# 50-00-0 | 4% | V/V | OSHA TWA 0.75ppm(0.9mg/mƒ),STEL 2ppm(2.5mg/m |
| Methanol (Methyl | CAS# 67-56-1 | <1% | V/V | OSHA TWA200 ppm,ACGIH STEL250 ppm |
| Water, Deionized ASTM Type II 18 | CAS# 7732-18-5 | 95% | V/V | None Established |
Keep away from heat and ignition sources. Harmful if swallowed. Avoid breathing vapors. Use with adequate ventilation. Avoid contact with eyes, skin, and clothes. Wash thoroughly after handling. Keep container
Keep away from heat and ignition sources. Harmful if swallowed. Avoid breathing vapors. Use with adequate ventilation. Avoid contact with eyes, skin, and clothes. Wash thoroughly after handling. Keep container closed.
|
SKIN: |
In case of contact, immediately flush skin with water for at least 15 minutes while removing contaminated clothing and shoes. Thoroughly clean clothing and shoes before reuse. If symptoms persist, seek medical attention. |
| EYES: | Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally. Seek Medical Aid. |
| INHALATION: | Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen |
| INGESTION: | Get medical attention immediately. Wash out mouth with water. Move exposed person to fresh air. If exposed person is conscious, give small quantities of water to drink. Do not induce vomiting unless directed to do so by medical personnel. |
|
Fire Extinguisher Type: |
Carbon Dioxide, dry chemical powder or appropriate foam |
| Fire / Explosion Hazards: | Thermal decomposition produces highly toxic fumes |
| Fire Fighting Procedure: | Use water spray to cool fire exposed containers. Wear self-contained breathing apparatus and proper clothing to prevent contact with skin & clothing. |
Absorb spill with inert material, then place in a chemical waste container. Ventilate and wash spill site. Dispose of in a manner consistent with federal, local law.
Store in a cool dry well ventilated area out of direct sunlight. Keep away from heat and flame. Do not get in eyes, on skin, or on clothing.
|
Respiratory Protection |
NIOSH/MSHA-approved respirator |
| Ventilation | Local |
| OTHER | Mechanical |
| Protective Gloves | NIOSH Approved Gloves |
| EYE PROTECTION | Goggles and Face Shield |
| Other Protective Equipment | Wear appropriate clothing to prevent skin exposure |
| BOILING POINT | ~100° C |
| VAPOR PRESSURE | not available |
| MELTING POINT | ~0° C |
| VAPOR DENSITY | not available |
| EVAPORATION RATE | N/E |
| Appearance /Odors | Clear liquid,strong odor |
| Flash Point | not flammable |
| Specific Gravity | 1.0 |
| Percent Volatile by | ~100% |
| Evaporation Standard | |
| Auto Ignition Temp | N/E |
| Lower Flamm. Limit in Air | Not available |
| Upper Flamm. Limit in Air | Not available |
| Solubility in Water | Soluble |
|
STABILITY |
Stable |
|
CONDITIONS TO AVOID |
Avoid contact with incompatible materials |
|
MATERIALS TO AVOID |
Oxidizing agents, metals, bases, amines. |
|
HAZARDOUS DECOMPOSITION PRODUCTS |
Toxic fumes of: Carbon Monoxide,Carbon Dioxide |
|
HAZARDOUS POLYMERIZATION |
Will Not Occur |
| Conditions to Avoid | None known |
NTP Carcinogen - Known: No - Anticipated: Yes, IARC Category- 2A CAS# 50-00-0 orl-rat LOD50: 800 mg/kg
The following statements refer to the environmental fate of formaldehyde:
When released into the soil, this material is expected to leach into groundwater. When released into water,this material is expected to readily biodegrade. When released into water, this material is not expected to evaporate significantly. This material is not expected to significantly bioaccumulate. When released into theair, this material is expected to be readily degraded by reaction with photochemically produced hydroxyl
radicals. When released into the air, this material is expected to be readily degraded by photolysis. When
released into the air, this material is expected to be readily removed from the atmosphere by dry and wet
deposition. When released into the air, this material is expected to have a half-life of less than 1 day.
The following toxicity information is for the formaldehyde portion: 96 Hr LC50 fathead minnow: 24.1 mg/L
(flow-through);96 Hr LC50 bluegill: 0.10 mg/L (flow-through); 96 Hr EC50 water flea: 20 mg/L.
Whatever cannot be saved for recovery or recycling should be handled as hazardous waste and sent to a
RCRA approved incinerator or disposed in a RCRA approved waste facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents inaccordance with federal, state and local requirements.
International (Water, I.M.O.)
-----------------------------
Not regulated
International (Air, I.C.A.O.)
-----------------------------
Not regulated
Formaldehyde solutions from 10% to 24.9% are regulated by IATA as Aviation regulated, N.O.S.(10%-24.9% Formaldehyde solution). Office of Hazardous Materials Safety Regulations and Interpretations; Refer# 010271. Refer to IATA for specific operator regulations.
DOT Classification: UN1198, Formaldehyde, Solutions,Flammable, 3,(8), PG III
DOT Regulations may change from time to time. Please consult the most recent D.O.T. regulations.
Chemical Inventory Status –
Part 1:
Chemical Inventory Status –
Part 2:
Federal, State & International
Regulations – Part 1:
Federal, State & International
Regulations – Part 2:
Chemical Weapons
Convention:
TSCA 12 (b):
CDTA:
SARA 311/312:
Australian Hazchem Code:
Poison Schedule:
Ingredient TSCA EC Japan Australia
----------------------------------------- ---- --- ----- ---------
Formaldehyde (50-00-0) Yes Yes Yes Yes
--Canada--
Ingredient Korea DSL NDSL Phil.
------------------------------------------- ----- --- ---- -----
Formaldehyde (50-00-0) Yes Yes No Yes
-SARA 302- ------SARA 313------
Ingredient RQ TPQ List Chemical Catg.
---------------------------------- --- ----- ---- --------------
Formaldehyde (50-00-0) 100 500 Yes No
-RCRA- -TSCAIngredient
CERCLA 261.33 8(d)
----------------------------------------- ------ ------ ------
Formaldehyde (50-00-0) 100 U122 No
No
No
No
Acute: Yes Chronic: Yes Fire: Yes Pressure: No Reactivity: No (Mixture / Liquid)
2SE
S6
Flammability
Health Reactivity
|
Revisions |
NFPA |
| 8/21/2012 | 0.2 Revised air and water Transport information in section 14 to read not regulated per info provided from OFI LS |
| 8/25/2010 | 0 Creation date LS |
|
3/5/2012 |
0.1 Revised DOT from non-regulated to Formaldehyde, solutions, flammable, 3,(8) UN1198, PG III LS |
The information herein is believed to be accurate and is offered in good faith for the user's consideration and investigation. No warranty either expressed or implied is made for the completeness or accuracy of the information whether originating from the above mentioned company or not. Users of this material should satisfy themselves by independent investigation of current scientific and medical knowledge that the material
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
Availability
Formalin manufacturer and supplier in Mumbai, Kolkata, Kandla, Chennai, Visakhapatnam, Haldia, Fujairah, Dubai, Sharjah.