RXSOL CHEMO PHARMA International Navi Mumbai, India

Products

7,061 products across 71 categories for marine, industrial, water treatment and laboratory use.

Browse all products Product catalogue

Solvent Chemicals

Iso propyl acetate

Part number
RXSOL-19-1339-025
Brand
RXSOL
Iso propyl acetate

Applications

 PRODUCT NAME  : ISOPROPYLACETATE
 CAS number     : 108-21-4
 UN number      : 1220
 Formula     : CH3COOCH(CH3)2
 Odour     : AROMATIC
 Solubility in water     : NEGLIGIBLE
 Density      : 0.869   at 25 oC
 Boiling point   : 89oC
 Melting point      : -73oC
 Viscosity       : 0.49 cp at 25 oC
 Flashpoint     : 4 oC
 Explosive limits    : 1.7 – 8.0 Vol%
 Vapour pressure     : 64 mbar at 20 oC
 Skin absorption/irritation            : YES
 TLV       Country  NL             Year  1995  : 250 ppm                950      mg/m3
 Pollution category    1994   :  III

Safety and SDS

Read the safety data sheet before handling. Wear suitable gloves and eye protection.

View safety data sheet

Product Name RXSOL-19-1339
Product Type   Iso propyl acetate

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Phone +91 22 65113333 / 5555 / 9999 / 27815540
Fax +91 22 2781 1318 :::AOH :0091 9821214367
Email rxsolchemicals@gmail.com
Website www.rxmarine.com

Chemical Name

CAS Number

EC Number

Index number

isopropyl acetate

108-21-4

203-561-1

607-024-00-6

Hazard description:
Information concerning particular hazards for human and environment:
At long or repeated contact with skin it may cause dermatitis due to the degreasing effect of the solvent.
R 11 Highly flammable.
R 36 Irritating to eyes.
R 66 Repeated exposure may cause skin dryness or cracking.
R 67 Vapours may cause drowsiness and dizziness.

After inhalation

Supply fresh air; consult doctor in case of complaints.

After skin contact

Generally the product does not irritate the skin.

After eye contact

Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.

After swallowing

If symptoms persist consult doctor.

Suitable extinguishing agents:
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
For safety reasons unsuitable extinguishing agents: Water with full jet
Protective equipment: No special measures required.

Person-related safety precautions: Wear protective equipment. Keep unprotected persons away.
Measures for environmental protection: Do not allow product to reach sewage system or any water course. Inform respective authorities in case of seepage into water course or sewage system. Do not allow to enter sewers/ surface or ground water.
Measures for cleaning/collecting: Dilute with plenty of water. Ensure adequate ventilation.

Handling:
Information for safe handling:
Protect against physical damage. Store in a cool, dry well-ventilated location, away from any area where the fire hazard may be acute. Outside or detached storage is preferred. Separate from incompatibles. Containers should be bonded and grounded for transfers to avoid static sparks. Storage and use areas should be No Smoking areas. Use non-sparking type tools and equipment, including explosion proof ventilation. Containers of this material may be hazardous when empty since they retain product residues (vapors, liquid); observe all warnings and precautions listed for the product. Do Not attempt to clean empty containers since residue is difficult to remove. Do not pressurize, cut, weld, braze, solder, drill, grind or expose such containers to heat, sparks, flame, static electricity or other sources of ignition: they may explode and cause injury or death.
Information about fire - and explosion protection:
Keep ignition sources away - Do not smoke.
Protect against electrostatic charges.
Storage:
Requirements to be met by storerooms and receptacles: Store in a cool location.
Information about storage in one common storage facility: Not required.
Further information about storage conditions:
Keep container tightly sealed.
Store in cool, dry conditions in well sealed receptacles.

Additional information about design of technical facilities: No further data; see item 7.

Ingredients with limit values that require monitoring at the workplace:
108-21-4 isopropyl acetate

PEL (USA)

TLV (USA)
WEL (Great Britain)

950 mg/m³, 250 ppm
Short-term value: 836 mg/m³, 200 ppm
Long-term value: 418 mg/m³, 100 ppm
Short-term value: 849 mg/m³, 200 ppm

Additional information: The lists valid during the making were used as basis.
Personal protective equipment:
General protective and hygienic measures: Keep away from foodstuffs, beverages and feed.  Wash hands before breaks and at the end of work. Avoid contact with the skin. Avoid contact with the eyes and skin.
Respiratory protection: Not required.
Protection of hands: The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves: The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.

Penetration time of glove material:
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be   observed.
Eye protection: Tightly sealed goggles

General Information

Form

Fluid

Colour

Colourless

Odour

Fruit-like

Change in condition

Melting point/Melting range

-73.4°C

Boiling point/Boiling range

88.8°C

Flash point

4°C

Ignition temperature 460°C

Danger of explosion

Product is not explosive. However, formation of explosive air/vapour mixtures are possible.

Explosion limits:
Lower 1.8 Vol %
Upper 8 Vol %
Vapour pressure at 20°C 61 hPa
Density at 20°C 0.87 g/cm³
Solubility in / Miscibility with water at 20°C 18.9 g/l

Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
Dangerous reactions No dangerous reactions known.
Dangerous decomposition products: No dangerous decomposition products known.

Acute toxicity:
LD/LC50 values relevant for classification:  

Oral

LD50

3000 mg/kg (rat)

Primary irritant effect:
on the skin Irritant to skin and mucous membranes.
on the eye No irritating effect.
Sensitization No sensitizing effects known.

General notes: Water hazard class 1 (German Regulation) (Assessment by list): slightly hazardous for water Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.

Product:
Recommendation Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Uncleaned packaging: Recommendation: Disposal must be made according to official regulations.

Land transport ADR/RID (cross-border)
  ADR/RID class 3 Flammable liquids.
  Danger code (Kemler) 33
  UN-Number 1220
  Packaging group II
  Hazard label 3
  Description of goods 1220 ISOPROPYL ACETATE
Maritime transport IMDG
  IMDG Class 3
  UN Number 1220
  Label 3
  Packaging group III
  EMS Number F-E,S-D
  Marine pollutant No
  Proper shipping name ISOPROPYL ACETATE
Air transport ICAO-TI and IATA-DGR
  ICAO/IATA Class 3
  UN/ID Number 1220
  Label 3
  Packaging group II
  Proper shipping name ISOPROPYL ACETATE

Labelling according to EU guidelines:
The product has been classified and marked in accordance with EU Directives / Ordinance on Hazardous Materials.
Risk phrases:
11 Highly flammable.
36 Irritating to eyes.
66 Repeated exposure may cause skin dryness or cracking.
67 Vapours may cause drowsiness and dizziness.
Safety phrases:
2 Keep out of the reach of children.
16 Keep away from sources of ignition - No smoking.
26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
29 Do not empty into drains

This information is based on our present knowledge.However, this shall not constitute a guarantee for anys pecific product features and shall not establish a legally valid contractual relationship.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Request the signed SDS as PDF

Availability

Iso propyl acetate manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Iso propyl acetate at a competitive price from us. We have ready stock of Iso propyl acetate in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Our stock points and branches