RXSOL CHEMO PHARMA International Navi Mumbai, India

Products

7,061 products across 71 categories for marine, industrial, water treatment and laboratory use.

Browse all products Product catalogue

Lab Chemical

SILICA GEL GF 254 FOR TLC

Part number
RXSOL-60-6605-422
Category
Lab Chemical
Brand
RXSOL
RXSOL

Overview

 TLC, the stationary phase is a thin adsorbent material layer, usually silica gel or aluminum oxide, 
coated onto an inert plate surface, typically glass, plastic, or aluminum. 

Applications

Silica gel can be used as a stationary phase in thin-layer chromatography to separate a mixture of non-volatile compounds using a single solvent or a mixture of solvents as mobile phase.

Characteristics and notes

In chemistry, silica gel is used in chromatography as a stationary phase. ... In this application, due to silica gel's polarity, non-polar components tend to elute before more polar ones,

Safety and SDS

Read the safety data sheet before handling. Wear suitable gloves and eye protection.

View safety data sheet
Product Name RXSOL-60-6605-422
Product Type     SILICA GEL GF 254 FOR TLC  
Revised date  

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Stock Point : Mumbai, Kandla, Chennai, Visakhapatnam, Kolkata, Fujairah, Muscat Barka

Phone +91 22 27815541 / 42
Fax +91 22 2781 1318 :::AOH :0091 9821214367
Email rxsolchemicals@gmail.com
Substance / Preparation : SILICA GEL GF 254
for thin layer chromatography
CAS No :112926-00-8
Substance. Contains no other components or impurities which will influence the classification of the product. 
3.1. Classification of the substance or mixture
Classification EC 67/548 or EC 1999/45
Classification : T; R23
Hazard Class and Category Code(s), Regulation (EC) No 1272/2008 (CLP)
Health hazards : Acute toxicity, Inhalation - Category 3 - Danger (CLP : Acute Tox. 3)
H331 2.2. Label elements Labelling EC 67/548 or EC 1999/45
Symbol(s) : T : Toxic   
R Phrase(s) : R23 : Toxic by inhalation.
R49 : May cause cancer by inhalation.
S Phrase(s) : S45 : In case of accident or if you feel unwell, seek medical advice
immediately (show the label when possible).
S52 : Not recommended for interior use on large surface areas.
Labelling Regulation EC 1272/2008 (CLP)
Hazard pictograms 
Signal words : Danger
Hazard statements : H331 : Toxic if inhaled. Precautionary statements
• Prevention : P271: Use only outdoors or in a well-ventilated area.
P261: Avoid breathing dust, fume, gas, mist, vapours, spray.
• Response : P304+P340: IF INHALED : Remove to fresh air and keep at rest in a position comfortable for breathing.
• Storage : P403+P233: Store in well-ventilated place. Keep container tightly closed.
P405: Store locked up.
• Disposal considerations : P501: Dispose of this material and its container to hazardous
or special waste collection point, in accordance with local, regional, national and/or international regulation.
2.3. Other hazards Other hazards : The substance does not fulfil the criteria to be identified as PBT
substance or vPvB substance according to Annex XIII of Regulation REACH. 
4.1. Description of first aid measures
Inhalation : Assure fresh air breathing. Allow the victim to rest.
Remove to fresh air and keep at rest in a position comfortable for breathing.
Specific treatment (see on this label). Immediately call a POISON CENTER or doctor.
Skin contact : Remove affected clothing and wash all exposed skin area with mild soap and water,
followed by warm water rinse.
Eye contact : Rinse immediately with plenty of water. Obtain medical attention if pain, blinking or redness persist.
Ingestion : Obtain emergency medical attention. Rinse mouth. Do NOT induce vomiting.
4.2. Most important symptoms and effects, both acute and delayed
Symptoms relating to use : Danger of serious damage to health by prolonged exposure through inhalation.
 4.3. Indication of any immediate medical attention and special treatment needed
General information : Never give anything by mouth to an unconscious person.
If you feel unwell, seek medical advice (show the label where possible). 
5.1. Extinguishing media
Suitable extinguishing media : Foam. Dry powder. Carbon dioxide. Water spray. Sand.
Unsuitable extinguishing media : Do not use a heavy water stream.
Surrounding fires : Use water spray or fog for cooling exposed containers.
5.2. Special hazards arising from the substance or mixture
Hazardous combustion products : Under fire conditions, hazardous fumes will be present.
5.3. Advice for fire-fighters
Protection against fire : Do not enter fire area without proper protective equipment
, including respiratory protection.
Special procedures : Exercise caution when fighting any chemical fire. Avoid
(reject) fire-fighting water to enter environment. 
6.1. Personal precautions, protective equipment and emergency procedures
For emergency responders : Equip cleanup crew with proper protection. Ventilate area.
For non-emergency personnel : Evacuate unnecessary personnel.
6.2. Environmental precautions
Environmental precautions : Prevent entry to sewers and public waters.
Notify authorities if product enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
Clean up methods : On land, sweep or shovel into suitable containers.
Minimize generation of dust. Store away from other materials.
6.4. Reference to other sections
See section 8. Exposure controls/personal protection 
7.1. Precautions for safe handling
Handling : Wash hands and other exposed areas with mild soap and water before eat,
drink or smoke and when leaving work. Avoid breathing dust, fume, gas, mist, vapours, spray.
Use only outdoors or in a well-ventilated area.
Technical protective measures : Provide good ventilation in process area to prevent formation of vapour. 
7.2. Conditions for safe storage, including any incompatibilities
Storage : Keep only in the original container in a cool, well ventilated place.
Keep container tightly closed.
Storage - away from : Strong bases. Strong acids. Sources of ignition. Direct sunlight.
7.3. Specific end use(s)
Specific end use(s) : None. 
8.1. Exposure controls
Personal protection : Avoid all unnecessary exposure.
• Respiratory protection : In case of insufficient
ventilation, wear suitable respiratory equipment.
• Hand protection : Wear protective gloves.
• Eye protection : Chemical goggles or safety glasses.
• Others : When using, do not eat, drink or smoke.
8.2. Control parameters
Occupational Exposure Limits : No data available. 
9.1. Information on basic physical and chemical properties
Physical state at 20 °C : Solid.
Odour threshold : No data available.
pH value : Not applicable.
Melting point [°C] : > 1600 °C
Decomposition point [°C] : N/A
Critical temperature [°C] : N/A
Auto-ignition temperature [°C] : N/A
Flammability (solid, gas) : N/A
Flash point [°C] : N/A
Boiling point [°C] : 2230 °C
Initial boiling point [°C] : N/A
Final boiling point [°C] : N/A
Evaporation rate : N/A
Vapour pressure [20°C] : N/A
Vapour pressure mm/Hg : N/A
Vapour density : N/A
Density [g/cm3] : 2,1
Relative density, gas (air=1) : N/A
Relative density, liquid (water=1) : N/A 
Solubility in water [% weight] : Insoluble in water
Solubility in water : N/A
Log Pow octanol / water at 20°C : No data available.
Solubility : ~7
Viscosity at 40°C [mm2/s] : N/A
9.2. Other information
Explosive properties : N/A
Explosion limits - upper [%] : N/A
Explosion limits - lower [%] : N/A
Oxidising properties : No data available. 
10.1. Reactivity
Reactivity : Not established.
10.2. Chemical stability
Chemical stability : Stable under recommended storage conditions.
10.3. Possibility of hazardous reactions
Hazardous reactions : Not established.
10.4. Conditions to avoid
Conditions to avoid : Direct sunlight. Extremely high or low temperatures.
10.5. Incompatible materials
Materials to avoid : Strong acids. Strong bases.
10.6. Hazardous decomposition products
Hazardous decomposition products : Fumes.
Carbon monoxide. Carbon dioxide. 
11.1. Information on toxicological effects Acute toxicity
• Inhalation : Toxic if inhaled.
• Dermal : Based on available data, the classification criteria are not met.
• Ingestion : Based on available data, the classification criteria are not met.
Corrosion : Based on available data, the classification criteria are not met.
Irritation : Based on available data, the classification criteria are not met.
Sensitization : Based on available data, the classification criteria are not met.
Mutagenicity : Based on available data, the classification criteria are not met.
Carcinogenicity : Based on available data, the classification criteria are not met.
Toxic for reproduction : Based on available data, the classification criteria are not met.
STOT-single exposure : Based on available data, the classification criteria are not met. 
STOT-repeated exposure : Based on available data, the classification criteria are not met.
Aspiration hazard : Based on available data, the classification criteria are not met.  
12.1. Toxicity
Toxicity information : Not established.
12.2. Persistence - degradability
Persistence - degradability : Biodegradable.
12.3. Bioaccumulative potential
Bioaccumulative potential : Not established.
12.4. Mobility in soil
Mobility in soil : Not established.
12.5. Results of PBT and vPvB assessment
Results of PBT and vPvB assessment : The substance
does not fulfil the criteria to be identified as PBT substance
or vPvB substance according to Annex XIII of Regulation REACH.
12.6. Other adverse effects
Environmental precautions : Avoid release to the environment. 
13.1. Waste treatment methods
General : Avoid release to the environment.
Dispose in a safe manner in accordance with local/national regulations.
Dispose of this material and its container to hazardous or special waste
collection point, in accordance with local, regional, national and/or international
regulation. Special precautions : Hazardous waste due to toxicity. 
14.1. Land transport (ADR-RID)
General information : Not regulated.
14.2. Sea transport (IMDG) [English only]
General information : Not regulated.
14.3. Air transport (ICAO-IATA) [English only]
General information : Not regulated. 
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture 
Safety, health and environmental : Ensure all national/local regulations are observed.
regulations/legislation specific for the substance or mixture
REACH Restrictions - Annex XVII : The components of this product are not subject to restrictions.
REACH Authorisation - Annex XIV : The components of this product are not subject to authorization.
15.2. Chemical Safety Assessment
Chemical Safety Assessment : It has not been carried out. 
Abbreviations and acronyms : PBT: persistent, bioaccumulative and toxic. vPvB: very persistent and very bioaccumulative
Sources of key data used : REGULATION (EC) No 1272/2008 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
of 16 December 2008 on classification, labelling and packaging of substances and mixtures, amending and repealing Directives
67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006 Further information : None. In accordance with REACH
Regulation (CE) Nº 1907/2006 and with CLP Regulation (CE) Nº 1272/2008 DISCLAIMER OF LIABILITY The information in this SDS
was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied,
regarding its correctness. The conditions or methods of handling,storage, use or disposal of the product are beyond our control and may be
beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense
arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only
for this product. If the product is used as a component in another product, this MSDS information may not be applicable. 

Request the signed SDS as PDF

Availability

SILICA GEL GF 254 FOR TLC manufacturers, suppliers, exporters in Mumbai, Gandhidham, Kolkata, Varanasi, Visakhapatnam, Chennai, Fujairah, Dubai, Canada BC, Barka, Sohar, Muscat, Oman.
Lab chemicals manufacturers, suppliers, exporters in India, UAE Middle East, Barka, Sohar, Muscat, Oman, Canada.
SILICA GEL GF 254 FOR TLC  is available in small packing as well as in bulk. Buy premium quality SILICA GEL GF 254 FOR TLC  and other lab chemicals from one of the most trusted brands.

Our stock points and branches