Scale Dissolver 2000RX
- Part number
- RXSOL-68-3071-025
- Category
- Metal Treatment
- Brand
- RXSOL
Overview
Barium based chellating agent which effectively reduced and chellate Metal ion based on Advanced scale dissolver technology.
Technical specifications
Typical Physical Properties
| Appearance | Clear Colourless Liquid |
|---|---|
| Density | 1.15-1.17 g/cm³ @ 20°C |
Applications
RXSOL-68-3071-025 control sulphate scale dissolution, Which is most commonly used in many oilfield sector. As a result, scale dissolution rates are rapid with loading capacities of up to 80 g/l deliverable.
Dosage and directions
RXSOL-68-3071-025 Scale Dissolver 2000RX is non-hazardous and non-corrosive allowing its easy transportation to, handling and application at the worksite.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | : Scale Dissolver RX |
| Part Number | : RXSOL-68-3071-025 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Hazira, Mumbai, Chennai, Vizag, Kolkata, Fujairh, Barka Oman, Kenya
| Phone | +91 22 20871200-1500 |
| Fax | +91 22 27612100 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com | |
| Website | www.rxmarine.com |
| Name of Substance | Cas Number | EINECS No | Wt.% | Symbol |
| Glycine,N,N-1,2-ethanediylbis[N-(car boxymethyl)-, Tetrapotassium Salt | 5964-35-2 | 227-743-5 | 10 -30 % | Xi |
| Carbonic acid, Dipotassium salt | 584-08-7 | 209-529-3 | 5 - 10% | Xn |
| Glycine,N,N-bis[2-[bis(carboxymethyl )amino]ethyl]-, Pentapotassium salt | 7216-95-7 | 404-290-3 | 5-10 % | Xi |
| Signal Word | Danger |
| Hazard Statements |
H314 - Causes severe skin burns and eye damage |
| Precautionary statements - prevention | Keep only in original container. Wash skin thoroughly after handling. Wear protective gloves/ protective clothing/ eye protection/ face protection.. |
| Precautionary statements - response |
P260 - Do not breathe dust/fume/gas/mist/vapours/spray P280 - Wear protective gloves/protective clothing/eye protection/face protection P303 + P361 + P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing P310 - Immediately call a POISON CENTER or doctor/physician P501 - Dispose of contents/container in accordance with local, regional, national, and international regulations as applicable P264 - Wash face, hands and any exposed skin thoroughly after handling P301 + P330 + P331 - IF SWALLOWED: rinse mouth. Do NOT induce vomiting. P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. P363 - Wash contaminated clothing before reuse P391 - Collect spillage |
| Other Hazard | Not classified as PBT/vPvB by current EU criteria |
| Eye Contact | Remove contact lenses, if worn. Immediately flush eyes with water for 15 minutes while holding eyelids open. Immediate medical attention is required. |
| Skin Contact | Promptly wash contaminated skin with soap or mild detergent and water. Promptly remove clothing if soaked through and wash as above. Burns: Flush with water immediately. While flushing, remove clothes which do not adhere to affected area. Call an ambulance. Continue flushing during transport to hospital. Chemical burns must be treated by a physician. |
| Inhalation: | Move the exposed person to fresh air at once. If breathing is difficult, (trained personnel should) give oxygen. If not breathing, give artificial respiration. Seek medical attention at once. |
| Ingestion: | Do NOT induce vomiting. Get immediate medical attention. Rinse mouth. Risk of product entering the lungs on vomiting after ingestion. Never give anything by mouth to an unconscious person. |
| General Advice | Seek medical attention for all burns, regardless how minor they may seem. The severity of the symptoms described will vary dependant of the concentration and the length of exposure. If adverse symptoms develop, the casualty should be transferred to hospital as soon as possible. |
| Suitable extinguishing media | Alcohol Foam, CO2, Dry Chemical |
|
Extinguishing media which must not be used for safety reasons |
None known. |
| Hazardous combustion products | Fire or high temperatures create: Carbon oxides (COx), Nitrogen oxides (NOx).. |
| Advice for firefighters | Wear self-contained breathing apparatus. Wear full protective equipment and apparatus. |
| Specific extinguishing methods | Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations. In the event of fire and/or explosion do not breathe fumes.Containers close to fire should be removed immediately or cooled with water. |
| Personal precautions, protective equipment and emergency procedures |
Do not get on skin or clothing. Wash thoroughly after handling. Do not breathe vapours or spray mist. Use personal protective equipment. See also section 8. |
| Enviromental Precaution | Do not allow contact with soil, surface or ground water.If the products get into drains, inform the relevant authorities immediately. |
|
Methods and materials for containment and cleaning up |
Stop leak if safe to do so. Contain and collect spillage with non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite) and place in container for disposal according to local/national regulations (see Section 13). |
| Advice on safe handling | Handle in accordance with good industrial hygiene and safety practice. Avoid contact with skin, eyes and clothing. Avoid spills and splashing during use. Do not breathe vapors or spray mist. |
| Storage |
Ensure adequate ventilation. Keep airborne concentrations below exposure limits. Keep containers tightly closed in a dry, cool and well-ventilated place Store above freezing temperature Avoid contact with: Strong oxidising agents. |
| Advice on general occupational hygiene | Use good work and personal hygiene practices to avoid exposure When using do not smoke, eat or drink. Wash hands and face before breaks and immediately after handling the product Remove contaminated clothing |
| Storage class Packaging materials |
Corrosive storage. Use specially constructed containers only |
| Engineering Control | Effective exhaust ventilation system. Maintain air concentrations below occupational exposure standards. | ||||||||||||||||||||
| Personal Protection |
Eye protection : Wear eye protection/ face protection. Hand protection : Wear the following personal protective equipment: Standard glove type. Gloves should be discarded and replaced if there is any indication of degradation or chemical breakthrough. Skin protection : Personal protective equipment comprising: suitable protective gloves, safety goggles and protective clothing Respiratory protection : When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. |
||||||||||||||||||||
|
Exposure Limits: |
|
||||||||||||||||||||
| Derived No Effect Level (DNEL) |
Long term exposure local effects |
||||||||||||||||||||
| Exposure Control |
All chemical Personal Protective Equipment (PPE) should be selected based on an assessment of both the chemical hazard present and the risk of exposure to those hazards. The PPE recommendations below are based on an assessment of the chemical hazards associated with this product. Where this product is used in a mixture with other products or fluids, additional hazards may be created and as such further assessment of risk may be required. The risk of exposure and need of respiratory protection will vary from workplace to workplace and should be assessed by the user in each situation.. |
||||||||||||||||||||
| Hygiene Measures | Wash hands before eating, drinking or smoking, Remove and wash contaminated clothing before re-use. |
Gloves Suit
| Physical State | Liquid |
| Colour | Colourless , Clear Liquid |
| Odour | No information available |
| Boiling point and boiling range | 100 °C / 212 °F |
| Flash Point | >100°C |
| Freezing Point | No Data Available |
| pH | 10 -11 |
| Evaporation rate | No data available |
| Flammability (solid, gas) | No data available |
| Upper explosion limit | No data available |
| Lower explosion limit | No data available |
| Explosive properties | No data available |
| Oxidising properties | None known |
| Vapor pressure | No data available |
| Relative vapor density | No data available |
| Density | 1.15 - 1.17 g/cm³ @ 20°C |
| Water solubility | Soluble |
| Solubility in other solvents | No data available |
| Partition coefficient: octanol | No data available |
| Autoignition temperature | No data available |
| Thermal decomposition | No data available |
| Viscosity, kinematic | No data available |
| Explosive properties | No data available |
| Oxidizing properties | No data available |
| Molecular weight | No data available |
| VOC | No data available |
| Kinematic viscosity | < 10 cst |
| Pour point | -4°C / 24.8°F |
| Recativity | Corrosive |
| Stability | Stable under normal temperature conditions and recommended use. |
| Possibility of hazardous reactions | No dangerous reaction known under conditions of normal use. |
| Incompatible materials | Strong oxidising agents |
| Hazardous Decomposition |
Decomposition products may include the following materials: |
| Condition to Avoid | Store above freezing temperature. |
| Polymerization | Will not occur. |
| Acute toxicity | |||||||||||||||||
| Route of Exposure | Inhalation, Eye contact, Skin contact | ||||||||||||||||
| Eyes |
Causes burns. May cause irreversible damage to eyes. |
||||||||||||||||
| Skin | Causes severe skin burns. | ||||||||||||||||
| Ingestion | Causes burns. Can burn mouth, throat, and stomach. | ||||||||||||||||
| Inhalation | Causes burns. Inhaled corrosive substances can lead to a toxic edema of the lungs. | ||||||||||||||||
| Unknown acute toxicity | Not applicable. | ||||||||||||||||
| Toxicology data for the components |
|
||||||||||||||||
| Sensitisation | This product does not contain any components suspected to be sensitizing. | ||||||||||||||||
| Mutagenic effects | This product does not contain any known or suspected mutagens. | ||||||||||||||||
| Carcinogenicity | This product does not contain any known or suspected carcinogens. | ||||||||||||||||
| Reproductive toxicity | This product does not contain any known or suspected reproductive hazards. | ||||||||||||||||
| Single exposure | Not classified | ||||||||||||||||
| Repeated exposure | Not classified. | ||||||||||||||||
| Aspiration hazard | Not applicable. |
| Toxicity | The product component(s) are not classified as environmentally hazardous. However, this does not exclude the possibility that large or frequent spills can have a harmful or damaging effect on the environment. The product may affect the acidity (pH-factor) in water with risk of harmful effects to aquatic organisms. | ||||||||||||||||
| Toxicity to fish | This product is not considered toxic to fish. | ||||||||||||||||
| Toxicity to daphnia and others | This product is not considered toxic to invertebrates. | ||||||||||||||||
| Toxicity to algae | This product is not considered toxic to algae | ||||||||||||||||
|
|||||||||||||||||
| Biodegradability | The product is not biodegradable. | ||||||||||||||||
| Persistence and degradability | No data available | ||||||||||||||||
| Bioaccumulative potential | The product does not contain any substances expected to be bioaccumulating. | ||||||||||||||||
| Mobility in soil | Soluble in Water | ||||||||||||||||
| Results of PBT and vPvB assessment | Not classified as PBT/vPvB by current EU criteria. |
| Remarks | Please consider the relevant national or regional provisions. Waste shall be separated into the categories that can be handled separately by the local or national waste management facilities. |
| Waste Disposal | The product should not be allowed to enter drains, water courses or the soil. Where possible recycling is preferred to disposal or incineration. If recycling is not practicable, dispose of in compliance with local regulations. Dispose of wastes in an approved waste disposal facility |
| EWC Waste Disposal No | According to the European Waste Catalogue, Waste Codes are not product specific, but application specific Waste codes should be assigned by the user based on the application for which the product was used The following Waste Codes are only suggestions: EWC waste disposal No: 07 01 04 Waste Code: 7135 Organic Bases |
Hazard Pictograms:
| UN Number | UN3267 |
| Proper shipping name | CORROSIVE LIQUID, BASIC, ORGANIC, N.O.S. (Diethylenetriaminepentaacetic acid, pentapotassium salt) |
| Transport hazard class(es) 8 | |
| ADR/RID | 8 |
| Subsidiary risk IMDG | 8 |
| Subsidiary risk IATA | 8 |
| Packing group | |
| Packing group | III |
| Environmental hazards | |
| Environmental hazards | No |
| Marine pollutant | No |
| ADR/RID | |
| Hazard ID | 80 |
| Tunnel Category | (E) |
| IMDG | |
| EmS Code | F-A S-B |
| IATA | |
| Emergency Action Code |
(EAC) 2X |
| Maximum quantity | 60 L |
| Hazchem code | ADG 2X |
| Maximum quantity | 5 L |
| Regulation |
Australian Standard for the Uniform Scheduling of Drugs and Poisons
International inventories |
| Chemical safety assessment | No data available. |
| Further information |
FOR INDUSTRIAL USE. |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if RX Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |
Availability
Scale Dissolver 2000RX manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Scale Dissolver 2000RX at a competitive price from us. We have ready stock of Scale Dissolver 2000RX in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
