Petroleum Jelly

Size:

Color:

Product Short Description: Petroleum jelly is a a semisolid jelly-like substance.
Product Technical Specification:

 

CHARACTERISTICS : SPECIFICATION
Description : A White Translucent Unctuous Mass, Slightly Fluorescent in daylight when melted, odourless, when wubbed on the skin
Solubility : Slightly soluble in Methylene Chloride, insoluble in Water, Ethanol (96%) & Glycerol
Drop Point Deg.C : 40 – 60
Consistency Dmm : 100-300
Infrared Absorption of A 0.05 % W/V solution In 2,2,4 – trimethylpentane, at about 290 Nm : As per specification
Acidity or Alkalinity : As per specification
Polycyclic Aromatic Hydrocarbons : As per specification
 Sulphated Ash,% : 0.05 Maximum
 
Remarks:

HANDLING & STORAGE

Handling: Avoid contact with skin and eyes. Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Keep away from all ignition sources.

Storage: Store in cool, well- ventilated place away from sources of heat and direct sunlight. Keep container tightly closed. Keep only in the original container.

HEALTH & SAFETY:
Product is unlikely to present any significant health or safety hazards when properly used in the recommended application and good standards of industrial and personal hygiene are maintained.

Images: Alt


Hydantoin

Size:

Color:

Product Short Description: Also used in disinfection
Product Technical Specification:

Product Details :
Cas No:77-48-5
Loss on drying:1% max
Purity:98 %
Bromine Content:55% to 55.8%
Fe content:Less than 10 ppm
Iron:10 ppm
Zinc:0.5 ppm

Test Specification
Appearance: Pale yellow coloured powder
Odour: Faint odour of bromine
Melting Point: 186 Degree C to 194 Degree C
Grade Standard: Reagent Grade
Physical State: Powder

Remarks:

 

Product Name1,3-Dibromo-5,5 Dimethylhydantion
Cas No77-48-5
TestSpecification
Description Pale yellow coloured powder
OdourFaint odour of bromine
Melting Point1860 C to 1940C
Loss on drying 1% max
Purity98.
minBromine Content55% to 55.8% 
Fe content<10ppmIron 10 ppm
Zinc0.5ppm
Images: Alt


Potassium Sulfate

Size:

Color:

Product Short Description: Potassium sulphate is white crystalline salt.
Product Technical Specification:

 

Physical state and

appearance

Yellowish-white crystals

Odor

Odorless.

Taste

Not available.

Potassium Sulphate (K2SO4)

95  %

Other sulphate, mainly MgSo4                 

3 %

Chlorides (KCl, NaCl)

1 %

Critical Temperature

Not available.

Bulk Density

Approx. 1,300 kg/m3

Density

2.66 g/cm3

Vapor Density

16.4 (Air = 1)

Volatility

Not available.

Molecular weight

174.26 g/mol

Water/Oil Dist. Coeff

Not available.

Ionicity (in Water)

Not available.
Remarks:
Images: Alt


Sodium Trimetaphosphate STMP

Size:

Color:

Product Short Description: Applications include food processing, starch modification, pharmaceuticals, and potable water treatment.
Product Technical Specification:

It is believed that the addition of STMP to the slurry promotes long crystal growth. Such crystals add the most strength to the core of the wallboard and also serve to form stronger bonds between the core and paper. While in theory, STMP can be used by manufacturers to decrease costs by increasing the core quality of wallboard, it has been discovered in practice that the current methods of adding STMP leads to further problems and delays.

 

Form         Powder
Colour White
Odour Odourless
Odor Threshold Not Applicable
pH 6-8 at 100 g/l 20 °C 
Melting Point 1670°C (3038°F) (decomposition)
Boiling Point Not Applicable
Solubility Partially soluble
Ignition temperature No information available.

 

Remarks:

Sodium Trimetaphosphate occurs as white crystals or as a white, crystalline powder. It is a cyclic polyphosphate composed of three metaphosphate units. It is freely soluble in water. The pH of a 1:100 aqueous solution is about 6.0.

Images: Alt


Sodium Thiosulphate Anhydrous

Size:

Color:

Product Short Description: White crystalline solid, sodium Thio sulphate anhydrous widely used in chemicals, detergents and many Industries.
Product Technical Specification:
Specifications

Extra Pure

 Industrial
Formula  Na2S2O3 Na2S2O3
CAS 7772-98-7 7772-98-7
Molecular Weight 158.10 158.10
Physical Appearance Pure White Powder Off White Powder
Assay (Min.) 99% 98%
Loss on Drying (LOD) 1% Max. 2% Max.
pH of 10% Solution 6.5 - 8.5 6.5 - 8.5
Remarks:
Images: Alt


Sodium Thiosulphate Pentahydrate Sugar Crystals

Size:

Color:

Product Short Description: Sodium Thiosulphate Pentahydrate Sugar Crystals
Product Technical Specification:
Specifications

Extra Pure

 Industrial
Formula  Na2S2O3.5H2O Na2S2O3.5H2O
CAS 10102-17-7 10102-17-7
Molecular Weight 248.17 248.17
Physical Appearance Snow White Crystalline Material White Crystalline Material
Assay (Min.) 99% 98%
Loss on Drying (LOD) 1% Max. 2% Max.
pH of 10% Solution 6.5 - 8.5 6.5 - 8.5
Remarks:
Images: Alt


Sodium Acetate Trihydrate

Size:

Color:

Product Short Description: Sodium Acetate Trihydrate is available as an agglomerate and a powder (anhydrous) as well as a crystal (trihydrate).
Product Technical Specification:

 

Physical state and appearance   Snow White Crystalline MaterialOff White / White Crystalline Material
Formula   CH3COONa,3H2O
Odour   Odourless to acetic (Slight.)
Molecular Weight   136.08
ASSAY, MIN   98 - 99%
CAS NO   6131-90-4
pH (1% soln/water)   7.5 - 9
Melting Point   324°C (615.2°F)
Specific Gravity   1.528 (Water = 1)
Solubility   Easily soluble in cold water, hot water.

Physical state and appearance: Solid. (Granular, crystalline powder.)
Odor: Odorless to acetic (Slight.)
Taste: Not available.
Molecular Weight: 82.03 g/mole
Color: Colorless. White.
pH (1% soln/water): 11 [Basic.]
Boiling Point: Not available.
Melting Point: 324°C (615.2°F)
Critical Temperature: Not available.
Specific Gravity: 1.528 (Water = 1)
Vapor Pressure: Not applicable.
Vapor Density: Not available.
Volatility: Not available.
Odor Threshold: Not available.
Water/Oil Dist. Coeff.: Not available.
Ionicity (in Water): Not available.
Dispersion Properties: See solubility in water.
Solubility: Easily soluble in cold water, hot water.

Remarks:
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


Sodium Acetate Anhydrous

Size:

Color:

Product Short Description: Sodium Acetate Anhydrous
Product Technical Specification:

Specifications

Extra Pure

Industrial

Sodium Acetate

CH3COONa

CH3COONa
CAS 127-09-3 127-09-3
Molecular Weight 82.03 82.03
Physical Appearance Snow White PowderWhite Off White Powder
Assay (Min.) 99% 98%
Loss on Drying (LOD) 1% Max 2% Max
pH of 5% Aqueous Solution 7.5 - 9.0 7.5 - 9.0
 
Specific Gravity   1.528 (Water = 1)
Solubility   Easily soluble in cold water, hot water.

Odor: Odorless to acetic (Slight.)
Taste: Not available.
Boiling Point: Not available.
Melting Point: 324°C (615.2°F)
Critical Temperature: Not available.
Specific Gravity: 1.528 (Water = 1)
Vapor Pressure: Not applicable.
Vapor Density: Not available.
Volatility: Not available.
Odor Threshold: Not available.
Water/Oil Dist. Coeff.: Not available.
Ionicity (in Water): Not available.
Dispersion Properties: See solubility in water.
Solubility: Easily soluble in cold water, hot water.

Remarks:
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


Borax

Size:

Color:

Product Short Description: Borax is classified as a detergent booster in laundry detergent as a versatile cleaning agent.
Product Technical Specification:
Remarks:
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


Cobalt Metal

Size:

Color:

Product Short Description: Cobalt acetate is a powerful oxidation catalyst
Product Technical Specification:

Cobalt Metal melts at 1493 degrees centigrade and boiling point 3100 degrees centigrade. 

Remarks:

Cobalt Metal used as :
For Chemical Products
Petro Refining, Petrochemical Catalysts.
In paints as a paint dryer and various dyes
Cutting tools and diamond cutting
Hybrid car and telephone batteries
Super alloys
Aerospace Industries
High speed Alloys
Glass and Ceramics
Animal feed industry
Main constituent of high temperature and high 
performance alloys
Improves strength property and increases melting point
Permanent Magnet

Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


Cobalt Cathode

Size:

Color:

Product Short Description: Cobalt Cathode
Product Technical Specification:

Cobalt Metal melts at 1493 degrees centigrade and boiling point 3100 degrees centigrade. 

Remarks:

Cobalt Metal used as :
For Chemical Products
Petro Refining, Petrochemical Catalysts.
In paints as a paint dryer and various dyes
Cutting tools and diamond cutting
Hybrid car and telephone batteries
Super alloys
Aerospace Industries
High speed Alloys
Glass and Ceramics
Animal feed industry
Main constituent of high temperature and high 
performance alloys
Improves strength property and increases melting point
Permanent Magnet

Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


Cobalt Sulphate

Size:

Color:

Product Short Description: Cobalt Sulphate
Product Technical Specification:

Cobalt Metal melts at 1493 degrees centigrade and boiling point 3100 degrees centigrade. 

Remarks:

Cobalt Metal used as :
For Chemical Products
Petro Refining, Petrochemical Catalysts.
In paints as a paint dryer and various dyes
Cutting tools and diamond cutting
Hybrid car and telephone batteries
Super alloys
Aerospace Industries
High speed Alloys
Glass and Ceramics
Animal feed industry
Main constituent of high temperature and high 
performance alloys
Improves strength property and increases melting point
Permanent Magnet

Images: Alt

HAVE A QUESTION?

Ask your questions away and let our dedicated customer service help you look through our FAQs to get your questions answered!

stock-clearance.png