Products Grid

Product Short Description: Biodegradable surfactants based tank cleaner This product is very common to use for removing of traces HYDROCARBONS from the tank, after cleaning of TANKS from solvent base tank cleaning materials. when possibilities of next cargo will contaminate with hydrocarbon.

Product Technical Specification:

The most important feature of Advance Tankclean is Splits after cleaning, releasing the oil phase for reclamation. The microemulsion-based formulation that combines the performance of a water and solvent based product into one low toxic product.

Odour	Characteristic odour Sweet orange
Appearance	Clear Liquid or Greenish Colur , Soluble in water
pH	7.5 - 8
Boiling point	100 °C at 760 mm /Hg
Vapour pressure	not known
Freezing point	<0 °C at 760 mm/Hg
Completely soluble in water
Specific gravity (water=1)	0.99 to 1

Remarks:

Non-flammable.
Free from hydrocarbon solvents.
Effective and economical in use , Water-based cleaner.
Non-corrosive to ferrous metals. Suitable for all tank-coatings.
Can be used for gas and hydrocarbon freeing of tanks.
Can be used for deodorizing
Contains wetting agents.

Images:

Get MSDS

Get Technical Bulletin

Connect On Whats App

Anti Corrosion and Anti Scaler Chiller TRAC 109

Product Short Description: Unique formulation with highly concentrated liquid cooling treatment compound, ferrous & Non ferrous corrosion inhibitors, antiscalants , dispersant and buffer solution of non carbonate.Usefull for use in high or low temperature closed cooling water syste

Product Technical Specification:

RX MARINE INTERNATIONAL are continiously working in water treatement sector, And developed many unique product to avoid corrosion and scale depositon in cooling water system. Here I wants to keep our experiment results with you.Corrosion inhibitor for closed cooling systems containing molybdate/phosphonate ( RXSOL-40-4018-025 ). Sodium molybdate has the advantage in that the dosing of lower ppm's of molybdate allow for lower conductivity of the circulating water. Sodium molybdate at levels of 50-100 ppm offer the same levels of corrosion inhibition that sodium nitrite at levels of 800+ ppm. By utilizing lower concentrations of sodium molybdate, conductivity is kept at a minimum and thus galvanic corrosion potentials are decreased.

Remarks:

Before testing of Nitrite level, Here is some point and guideline, what you need to do. : 1 take the following readings; pH, TDS (uS), and nitrite level.and record. 2 add the Chemical your are using. 3. wait for a period of time for the sysem to circulate. hours> 4. Re check the readings. and record. 5 track these readings
for a period of time.

If the TDS and Nitrite drop you have a leak/ unknown makeup. if the TDS stays stable and the nitrite drops you have a biological problem. Bacteria that convert nitrite to nitrate.

Solution ::: Use DI water in place of general water, And also use. Algaecide to control Bacterial growth inside water system ... http://rxmarine.com/Biocide-Algaecide

Images:

Get MSDS

Get Technical Bulletin

Connect On Whats App

Degreaser VISCOUS VPCL

Product Short Description: Alkaline Degreaser for Surface Preparation

Product Technical Specification:

Appearance Clear light yellow liquid
pH : 10.9-11.4 (Neat)
Density (SG) : 1.03-1.05 kg/l

Non-volatile Content : 18-25%

Remarks:

Concentrated, this product may be diluted with up to 200 parts water for greatest economy. This product may be used for degreasing and contains corrosion protection. Rust preventatives form a corrosion inhibiting coating when diluted cleaner is not rinsed from metal surfaces.

Dual Power concentrate is a safe alternative to hazardous cleaners of the past. This cleaner gives you something that ordinary cleaners can't offer- Dual cleaning surfactants. This cleaner leaves a pleasant, fresh scent that your customers are sure to notice and appreciate.

Images:

Get MSDS

Get Technical Bulletin

Connect On Whats App

Potassium Permanganate Impregnated Alumina

Product Short Description: 45.36 kg of RXSOL-24-1905-025 media will remove a minimum of 8 pounds (3.62 kg) of hydrogen sulfide.

Product Technical Specification:

Removal Capacities Contaminant Gas	Gram / cc	%BY WEIGHT
Hydrogen sulfide (H2S)	0.0640	8.00 %
Nitric oxide (NO)	0.0228	2.85
Sulfur dioxide (SO2)	0.0320	4.00
Nitrogen dioxide (NO2)	0.0900	11.25
Formaldehyde (HCHO)	0.0112	1.40

* 100 pounds (45.36 kg) of RXSOL-24-1905-025 media will remove a minimum of 8 pounds (3.62 kg) of hydrogen sulfide.

Potassium Permanganate Impregnated Alumina

Remarks:

1. Properties:

1.1. Activated Alumina content: 75~85wt%.

1.2. Potassium permanganate content:3~5 wt%.

1.3. Humidity≦22 wt%.

1.4. Particle size3.2~3.8mm.

1.5. Surface area:200~300m2/g.

1.6. Shape: ball particles.

1.7. Density:0.80~0.9g/cc.

2. Performance guarantee：

2.1. Filtration rate for H2S≧0.10g H2S/cc.

Images:

Get MSDS

Get Technical Bulletin

Connect On Whats App

AURIN p-ROSOLIC ACID

Product Short Description: AURIN p-ROSOLIC ACID is yellowish or deep-red crystals with greenish metallic luster organic compound

Product Technical Specification:

C.A.S. No.	603-45-2
CI NO.	43800
EC Number	210-041- 8

Specifications:

Dye Content (by Spectrophotometry)	>85%
Solubility 0.1% (EtOH)	Clear solution
Absorption maximum (Ethanol +5ml 1N HCl) ?max	482-487nm
Absorptivity (A1%/1cm, in Ethanol + 5ml 1N HCl at ?max)	>2000
Loss On Drying (110°C)	<3%

Remarks:

Dye content 85 %
Dyes, Stains & Indicators - p-Rosolic Acid

HSN Code : 32049000
IMDG Identification : Not Regulated for Transport (Non-Haz)
Molecular Formula : C19H14O3
Molecular Weight : 290.31

Images:

Get MSDS

Get Technical Bulletin

Connect On Whats App

AMMONIUM Fluoride Crystal

Product Short Description: Ammonium fluoride white crystal solid. It is soluble in water. It is noncombustible.

Product Technical Specification:

Physical Properties

White, deliquescent, crystalline solid; occurs in various forms, as granular powder (commercial products), needles or leaflets, or hexagonal prism (formed on sublimation and condensation); density 1.009 g/cm3 at 25°C; decomposes on heating; highly soluble in cold water (100g/100g at 0°C); decomposes in hot water; slightly soluble in alcohol, insoluble in liquid ammonia

Remarks:

Textile dyeing chemicals

Images:

Get MSDS

Get Technical Bulletin

Connect On Whats App

Activated Carbon Acid Washed

Product Short Description: Used for water and air purification, solvent recovery, waste treatment, removal of sulfur oxide from stack gases and "clean'' rooms as deodorant, and for air conditioning. to enhance the adsorption of toxic gases in the air, such as ammonia, formaldehyde, benzene, secondhand, smoke smell after decor

Product Technical Specification:

SPECIFICATIONS

Properties		W-150	W-200	W-250	W-280	W-320
M B Value	mg/g	150	200	250	280	320
KMn04	%min	25	35	45	55	65
Ash	%max	8	5	3	2	1
Iron (ppm)	max	300	200	200	150	100
Acid Sol. (HCI)	%max	5	3	2	2	1
Water Sol.	%max	5	1	1	1	1
L.O.D.	%max	20	10	10	10	10
C1 & SO4	max	.....USP......
pH		........6.0 to 7.5..........
Particle Size		..98% Passes through 100 Mesh..

Remarks:

DETERMINATION OF M.B. VALUE OF ACTIVATED CARBON REAGENT:

Methylene Blue Solution – Dissolve 0.15 gram of methylene blue confirming to IS: 2230-1962 in 100 ml of Distilled Water (Distilled water having pH value 7.0). PROCEDURE : Weigh accurately about 0.1 gram of the material, as received, with accuracy of 0.01 gram and transfer to 50 ML Glass stoppered flask. Add from a burette 10 ml of methylene blue solution and shake for 5 minutes. After the first 10 ml are decolorized continue to add methylene blue solution (1 ml at a time) till the blue colour disappears for 5 minutes. Decolorizing power of Activated Carbon is expressed in terms of milligrams of methylene blue adsorbed by 1 gram of activated carbon. (This value is MB value).

CALCULATION :

DECOLOURIZING POWER = 15 x V Divided by 10 x M

Where V = volume in ml of methylene blue solution consumed, and M = mass in gram of the material taken for the test. (Use methylene blue of any standard company to prepare solution and compare solution with standard solution of methylene blue as it does vary batch to batch).

Images:

Get MSDS

Get Technical Bulletin

Connect On Whats App

Calcium OXIDE Powder

Product Short Description: Extra Pure for RUBBER processing.

Product Technical Specification:

CALCIUM OXIDE is an odorless, white or gray-white solid in the form of hard lumps. A strong irritant to skin, eyes and mucous membranes. Used in insecticides ...

Because of vigorous reaction of quicklime with water, quicklime causes severe irritation when inhaled or placed in contact with moist skin or eyes. Inhalation may cause coughing, sneezing, labored breathing. It may then evolve into burns with perforation of the nasal septum, abdominal pain, nausea and vomiting. Although quicklime is not considered a fire hazard, its reaction with water can release enough heat to ignite combustible materials.

Appearance	White to pale yellow/brown powder
Odor	Odorless
Density	3.34 g/cm3
Melting point	2,613 °C (4,735 °F; 2,886 K)
Boiling point	2,850 °C (5,160 °F; 3,120 K) (100 hPa)
Solubility in water	Reacts to form calcium hydroxide
Solubility in Methanol	Insoluble (also in diethyl ether, octanol)
Acidity (pKa)	12.8
Magnetic susceptibility (χ)	−15.0×10−6 cm3/mol

Remarks:

Images:

Get MSDS

Get Technical Bulletin

Connect On Whats App

Fire Resistance Hydraulic Fluid Concentrates

Product Short Description: Waterbased hydraulic fluid specifically formulated for use in high-pressure open / vent to sea Blow Out Preventer (BOP) control systems.

Product Technical Specification:

Typical Physical Properties	RXSOL-16-3764-210	RXSOL-16-3764-210 No Dye
Appearance	Clear Dark Green Mobile Fluid	Clear Amber Fluid
Specific Gravity @15.6°C	1.063	1.063
pH (neat)	10.0	10.0
pH @ 2%	9.4	9.4
Pour Point	-40°C (-40°F)	-40°C (-40°F)
Kinematic Viscosity (cSt)-20°C (-4°F)	740	740
0°C (32°F)	82	82
20°C (68°F)	20	20
40°C (104°F)	7	7

Remarks:

Water-glycol fluids results Lubrication and component life systems containing pumps with plain bearings or lightly loaded ball and roller bearings designed to operate with water glycol fluids. This is best product to reduce its maintenance costs

Suitable for demanding hydraulic applications where there is a high fire risk, such as those found in the Metal and Mining industries.

Images:

Get MSDS

Get Technical Bulletin

Connect On Whats App

Sulfamic Acid Descaler Cleaner

Product Short Description: Descalex blended with Inhibitor for removing scales obtained from water in heating and cooling systems e.g. boilers, Condensers, Heat Exchanger, jackets and coils

Product Technical Specification:

Sulphamic Acid Specifications :

Sulphamic Acid Based Descalants
Our high quality range of Sulfamic Acid Descalant is non hazardous & non flammable, and does not give off unbearable fumes. It’s perfect for removing scales from cooling towers, coils, heat exchangers, condensers and heating & cooling systems. Sulfamic Acid Descalant increases the efficiency of working of a plant and equipment on cooling and cleaning surfaces by removing industrial scale.

Sulfamic ACID various grade :::

A) Export Quality

CAS Number: 5329-14-6

IUPAC: sulfamic acid

Common Chemical Name	Sulfamic Acid
Molecular Formula	NH2SO3H
Molecular Weight	97.09
Purity of Sulfamic	98.1%(min.)
Moisture	0.1% max
Physical Appearance	White crystaline powder
Matter Insoluble in water	0.05
Sulphate as So4	0.1
Lead as Pb	0.0001
Iron as Fe	0.001
Ammonical Nitrogen as NH4 HSO4	0.15

Melting point	205 Deg.C
Decomposition Temperature	209 Deg.C
Specific Gravity	2.126
Bulk Density (loose)	1.0 - 1.2
Bulk Density (packed)	1.0 - 1.6
Dissociation constant	0.101

B) sulphamic acid Technical grade

Purity- 99 % w/t min

sulphate- 0.05 % w/t/ max.

Iron[fe] - 0.001 % w/t/ max.

Lead [pb] - 0.001 % w/t/ max.

Apperiance - white crystalline powder.

Material insoluble in water - 0.1 % w/t/ max.

Ammonical nitrogen- 0.15 % w/t/ max.

C) Sulphamic acid Descalant grade

Purity- 97 % min.

Moisture- 1 % min.

Sulphate As so4 - 0.02 % max.

Lead as [pb] - 0.001 % max.

Iron as [fe] - 0.001 % max.

Ammonical nitrogen - 0.015 % max.

Inhibitor dose - 1.5 % min.

Inhibitor efficiency - 98 % min.

Remarks:

Efficiency :Rapid Softening, disintegration and dissolving of scales.

Economy

By reducing down-time, productivity is increased. by protecting metal and by uniform leaning of the surface equipment life is prolonged and performance made superior. The above information is adequate for commonly encountered problems of descaling.

Handling & Storage

Safety

•    No Fumes Avoid contact with skin or eyes. Wear Cup-type, rubber or soft plastic-framed goggles, protective clothing, and rubber gloves must be worn when handling.

•    Keep in a tightly closed container. Protect from physical damage.

•    Store in a cool, dry, ventilated area away from sources of heat, moisture and incompatibilities.

•    Containers containing this material may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.

•    Ensure as low exposure as possible. Local exhaust ventilation is generally preferred as it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.

Images:

Search form

Advance Tankclean

Anti Corrosion and Anti Scaler Chiller TRAC 109

Degreaser VISCOUS VPCL

Potassium Permanganate Impregnated Alumina

AURIN p-ROSOLIC ACID

AMMONIUM Fluoride Crystal

Activated Carbon Acid Washed

Calcium OXIDE Powder

Fire Resistance Hydraulic Fluid Concentrates

Sulfamic Acid Descaler Cleaner

Sulphamic Acid Specifications :

Efficiency :Rapid Softening, disintegration and dissolving of scales.

Economy

Safety

Potassium Chloride Fire Extinguisher

Lime Powder Tech

HAVE A QUESTION?

Ask a question - WebForm Inline

LiveChat