Your shopping cart is empty.
Product Code: RXSOL-60-6604-047
| Physical state at 20 °C : | Solid |
| Odour threshold : | No data available |
| pH value : | No data available |
| Relative evaporation rate (butylacetate=1) : | No data available |
| Melting point : - | 1 °C |
| Freezing point : | No data available |
| Boiling point : | 344 °C Flash point : No data available |
| Auto-ignition temperature : | No data available |
| Decomposition temperature : | No data available |
| Flammability (solid, gas) : | No data available |
| Vapour pressure : | 1.1 mm Hg at 135.60C |
| Relative vapour density at 20 °C : | No data available |
| Relative vapour density at 20 °C : | No data availableI |
| Relative density : | No data available |
| Solubility : | Water: Slightly soluble in water |
| Log Pow : | No data available |
| Viscosity, kinematic : | No data available |
| Viscosity, dynamic : | No data available |
| Explosive properties : | No data available |
| Oxidising properties : | No data available |
| Explosive limits : | No data available |
Product Code: RXSOL-25-2208-210
PROPERTIES
Pet Coke Remover is a concentrated liquid solution containing powerful surface active agents, a corrosion inhibitor and aqueous chemical agents.
Appearance / Color : Clear, light yellow liquid.
Specific gravity : 1.1–1.2 gr/cm3 at 20°C
pH : 11.5–12.5
Pet Coke STAIN removal concept -
Coal and petcoke leaves stain, its removal is important task during hold cleaning operation. Our expert has 2 suggestion for removal of such stain from the surface.
1st one to use RX Tuff heavy-duty alkaline cleaner, which can apply as an emulsion, need time to take effect and are rinsed away with seawater. More than one application will be needed to remove stubborn stains.
2nd one solution is much more effective than 1st one step. Here our expert suggests using New ORG on the spotted area where the residue is tightly deposited on the surface. " New ORG -RXSOL-20-2020-025 " this product is specialized to react with oily residue where any alkaline cleaner fails to emulsify. Uses of New ORG chemicals for stain removal/cleaning principally dissolve and emulsify OIL RESIDUE stain completely which is resulting stain-free surface, Then without flushing with water follow 1st step.
Product Code: RXSOL-60-6604-044
| Physical state at 20 °C : | Solid |
| Odour threshold : | No data available |
| pH value : | No data available |
| Melting point [°C] : | 121 - 125 °C |
| Decomposition point [°C] : | N/A |
| Critical temperature [°C] : | N/A |
| Auto-ignition temperature [°C] : | N/A |
| Flammability (solid, gas) : | N/A |
| Flash point [°C] : | 121 °C |
| Boiling point [°C] : | 249 °C |
| Initial boiling point [°C] : | N/A |
| Final boiling point [°C] : | N/A |
| Evaporation rate : | N/A |
| Vapour pressure [20°C] : | N/A |
| Vapour pressure mm/Hg : | 13 mm Hg at 132 °C |
| Vapour density : | 4,22 |
| Density [g/cm3] : | 1,32 |
| Relative density, gas (air=1) : | N/A |
| Relative density, liquid (water=1) : | N/A |
| Solubility in water [% weight] : | 2.9 g/l at 25 °C |
| Solubility in water : | N/A |
| Log Pow octanol / water at 20°C : | No data available |
| Solubility : | 2.5 - 3.5 |
| Viscosity at 40°C [mm2/s] : | N/A |
| Explosive properties : | N/A |
| Explosion limits - upper [%] : | N/A |
| Explosion limits - lower [%] : | N/A |
| Oxidising properties : |
No data available |
Product Code: RXSOL-60-6604-043
Product Code: RXSOL-60-6604-041
Product Code: RXSOL-60-6604-040
Product Code: RXSOL-60-6604-039
Product Code: RXSOL-60-6604-038
Product Code: RXSOL-60-6604-037
Product Code: RXSOL-60-6604-036
Product Code: RXSOL-60-6604-035
Product Code: RXSOL-60-6604-034
