Your shopping cart is empty.
Product Code: RXSOL-10-3256-025
Product Code: RXSOL-70-7033-500
Product Code: RXSOL-19-7589-025
PHYSICAL PROPERTIES
| Appearance | A Green Powder |
| Density | 2.92 g/mL at 25 °C |
| Melting point | 474 °C |
| Insoluble in | Water |
Product Code: RXSOL-60-6025-050
Product Code: RXSOL-19-1335-028
Product Code: RXSOL-14-2066-210
|
General information |
|
|
Appearance |
|
|
Physical state |
Liquid. |
|
Color |
Clear. |
|
Odor |
Faint odor. |
| Important health, safety and environmental information | |
| pH | 7 |
| Boiling/condensation point | >85°C |
| Melting/freezing point | Not available. |
| Flash point | Closed cup: 229.4°C (444.9°F) |
| Flammable limits | Not available. |
| Auto-ignition temperature | Not available. |
| Vapor pressure | Not available. |
| Specific gravity | 1.01 |
|
Partition coefficient: noctanol/ water (log Kow) |
Not available. |
| Viscosity | Kinematic: 1.75 cm2/s (175 cSt at 40°C) |
| Density | Not available. |
| Vapor density | >1 [Air = 1] |
|
Evaporation rate (butyl acetate = 1) |
Not available. |
Product Code: RXSOL-40-2066-025
|
General information |
|
|
Appearance |
|
|
Physical state |
Liquid. |
|
Color |
Clear. |
|
Odor |
Faint odor. |
| Important health, safety and environmental information | |
| pH | 7 |
| Boiling/condensation point | >85 C |
| Melting/freezing point | Not available. |
| Flash point | Closed cup: 229.4 C (444.9 F) |
| Flammable limits | Not available. |
| Auto-ignition temperature | Not available. |
| Vapor pressure | Not available. |
| Specific gravity | 1.01 |
|
Partition coefficient: noctanol/ water (log Kow) |
Not available. |
| Viscosity | Kinematic: 1.75 cm2/s (175 cSt at 40 C) |
| Density | Not available. |
| Vapor density | >1 [Air = 1] |
|
Evaporation rate (butyl acetate = 1) |
Not available. |
Product Code: RXSOL-37-1035-020
Wide range of grades available, including custom orders
Gentle – clean surfaces without damaging underlying material
Porous – can be used to absorb contaminants
Organic: renewable and environmentally friendly
100% silica-free
Re-usable
Specification :
Physical Characteristics
| Appearance: | Brown color, solid natural granules |
| Size: | 1 - 1.5 mm. (new tolerance) Also refer above " Description " section |
| Corrosive action | None |
| Safety Risk / Advise |
None |
| Specific Gravity: | 1.2 – 1.4 |
| Hardness: | 3 on MOHS scale |
| Moisture: | NMT 11% by weight |
| PH: | 7.5 |
| GSA Specification: | AA‐1722 Type 2 |
| Chemical Analysis ‐ % by weight |
Nitrogen: .10 Specific Cellulose: 40/60 Lignin: 20/30 Toluene: .5/1.0 Solubility: 6.5 |
| Military Specification: | MIL‐G=5634, Type 3 |
| Methoxyl: | 1.0 |
| Chlorine: | 1.5 |
| Ash: | 1.0 |
Offer Walnut Shell pieces/walnut shell powder for chemical industrial.
Processing walnut shell pieces, walnut shell powder with any size. We process a large quantity per month and packing as per inquiry.
Product: Walnut shell pieces
Origin: INDIA
Grade:
-walnut shell pieces
-small shell pieces
-walnut shell powder
Packing: 1MT/flexi bag or bulk or as customer’s request in 25 Kg
Supply Location : Fujairah, Mumbai, Kandla, Kolkata, Visakhapatnam, Dubai, Sharjah, Abudhabi
For Export Min quantity: 1x40feet (20MT)
For Local Supply : 25 Kg BAG
Product Code: RXSOL-19-1252-200
| PRODUCT NAME | : | BUTYL CELLOSOLVE ACETATE |
| CAS number | : | 112-07-2 |
| UN number | : | |
| Formula | : | C4H9OCH2CH2OOCCH3 |
| Odour | : | FRUITY |
| Solubility in water | : | INSOLUBLE |
| Density | : | 0.942 at 20 oC |
| Boiling point | : | 192 oC |
| Melting point | : | -63 oC |
| Viscosity | : | 87 oC |
| Flashpoint | : | 0.9 – 8.5 Vol% |
| Explosive limits | : | .48 mbar at 20 oC |
| Vapour pressure | : | |
| Skin absorption/irritation | : | YES |
| TLV Country NL Year 1995 | : | 20 S ppm 135 S mg/m3 |
| Pollution category 1994 | : |
(C) |
Product Code: RXSOL-11-1048-050
Typical descaling cleaning procedure :
1st Stage : Take ‘RXSOL-11-1053-010’ weblink ( http://rxmarine.com/Alkaline-Descaler ) and mix with water in the ratio of 1:6 (One litre of RXSOL-1053 and six litres of water). Circulate the solution or immerse the equipment in this solution for 2 hrs. This will be helpful in loosening the hard deposited scale.
RXSOL-40-1048-025 should not be used on Aluminium, Zinc, Tin, or any Galvanized Surfaces for which a special grade cleaner should be used. Chemical Cleaning Module Rx cleansers has developed a 280 litres capacity cleaning module, primarily designed for use with chemical acid solvents for descaling boilers, calorifiers, heat exchangers & other types of equipment where rust & scale form RXSOL-11-1008--DC Boilers, See Rx cleansers Practical Application Manual.
Formation of Calcium Sulfate is main cause for SCALE formation :::
The principal problem potential posed by sulfate ions in water is the possibility of calcium sulfate scale formation. Precipitation of calcium sulfate can occur when high concentrations of both calcium and sulfate exist simultaneously. There are three primary areas of water treatment in which calcium sulfate precipitation may occur boilers, cooling systems, and ion exchangers operating in the hydrogen or acid mode.
In boilers, calcium sulfate scale formation has been reduced to a minimum by modern treatment practices. The low hardness levels largely preclude calcium sulfate boiler scale. By contrast, cooling systems are subject to calcium sulfate scale deposition because the makeup is usually not treated for hardness removal. Cooling water is usually treated with sulfuric acid for pH control, and the makeup is cycled, i.e. concentrated. Calcium sulfate scale deposition can result unless the cycles of concentration are properly controlled in conjunction with the proper use of scale control chemicals. Cation ion exchangers regenerated with sulfuric acid also can pose a major calcium sulfate problem. Calcium sulfate precipitation can be avoided by controlling the acid concentration and the flow rate through the exchanger.
Sulfate content can be calculated in Laboratory by using this method ::: http://rxmarine.com/SULFATE-TEST-KIT
Product Code: RXSOL-12-2031-200
Other names:Sodium hyposulfite, Hyposulphite of soda
Identifiers CAS number : 7772-98-7 Y, 10102-17-7 : (pentahydrate)
UNII :L0IYT1O31N Y
ChEMBL CHEMBL : 1201157 N
RTECS number :XN6476000
|
Molecular Formula |
Na2S2O3.5H2O |
|
Molar Mass |
158.11 g/mol |
|
Appearance |
Clear Liq |
|
Odor |
Odorless |
|
Density |
1.667 g/cm3 |
|
Melting Point |
48.3 °C (pentahydrate) |
|
Boiling Point |
100 °C (pentahydrate, - 5H2O decomp) |
|
Solubility in Water |
76.4 g/100 g H20(20 °C) |
IUPAC name :Sodium thiosulfate
Other names:Sodium hyposulfite ,Hyposulphite of soda
Identifiers
CAS number : 7772-98-7 Y,
10102-17-7 : (pentahydrate)
PubChem: 24477
ChemSpider :22885 Y
UNII :L0IYT1O31N Y
ChEMBL CHEMBL : 1201157 N
RTECS number :XN6476000
Keep away from heat as the potential for release of sulfur dioxide fumes exists. Liquid sodium thiosulfate has very low toxicity but routine safety precautions should be practiced. Rubber gloves, safety goggles and protective clothing is recommended.
Sodium Thiosulfate, wt%30 +/- 2%
Sulfite, wt%1.5 max.
pH 7.0 – 9.0
Physical Properties:
Specific Gravity @ 25o C 1.252 – 1.34
Density, lbs/gal @ 25o C 10.4 – 11.2
Product Code: RXSOL-98-9818-025
A fine, white, odorless, powdered solid. Toxic by ingestion, inhalation and skin absorption. Used as a rodenticide
Fluffy, colorless to white (sometimes dyed black).
