Products Grid | Page 71 | Marine Chemicals,Tank Cleaning Chemicals,Water Chemicals Products,Cooling Water Treatment Chemicals

Product Short Description: This bluish green powder is soluble in acids and insoluble in water

Product Technical Specification:

Remarks:

Images:

Get MSDS

Get Technical Bulletin

Connect On Whats App

Odor Control

Product Short Description: RXSOL Odor Eliminator was developed to absorb for the strong acid odours, mainly Hydrogen Sulphide, Methyl Mercaptan and other gases, associated with sewage and fatty wastes.

Product Technical Specification:

RXSOL Odor Eliminator is different to nearly all other odour neutralisers or masking agents. The difference lies in the product makeup: nearly every product in the market is a blend of essential oils or plant extracts combined with a standard surfactant while RXSOL Odor Eliminator is made of food and cosmetic grade compounds and contain only 1% essential oils or plant extracts (by total volume of concentrate). Basic chemistry proves all essential oil and plant extract based products cannot truly neutralise odours; they can only mask them or encapsulate them for a period before releasing them again. Essential oils and plant extracts cannot bind to, and react with, a compound such as H2S and change the structure of that volatile compound into a non-volatile compound.

Remarks:

1) Fogging System 2) Vapour Phase System 3) Direct Dosing into liquid

It is worth explaining, that, unlike masking agents,RXSOL Odor Eliminator does not blow away in the wind. Being positively charged, it will seek out target molecules and bond to them resulting in a chemical reaction forming a non-volitile organic salt. If a RXSOL Odor Eliminator molecule does not find a target, it will attach itself to a negatively charged surface and wait for an odorous molecule. As with all gases, the odorous molecules are constantly moving and, given time, will come into contact with a RXSOL Odor Eliminator molecule and be destroyed.

Fogging System:

Fogging systems spraying RXSOL Odor Eliminator are used when odour is from open-air sources.RXSOL Odor Eliminator is sprayed on an interval basis depending on odour type and strength. An example of this is running the system for 30 seconds ON and 2 minutes OFF.

Some examples of facilities where fogging systems can be used:

Waste Water/Sewage Treatment Plants
Refuse Transfer Stations
Steel Manufacturing Slag Beds
Contaminated Soil Remediation
Pig Farms
Sludge Lagoons

Fogging systems spraying RXSOL Odor Eliminator is also used in indoor facilities. Some examples are:

Sewage Pumping Stations
Slurry Pits

Vapour Phase Systems :

Vapour phase systems delivering RXSOL Odor Eliminator is used when odour is from ducted, or confined, air sources. This type of application is designed to inject the vapour into a continuous flow air stream that is part of an exhaust or extraction process. These types of systems are delivering vapour into the air stream continuously. Some examples of these types of problems are:

Manufacturing Process Exhaust Airflow
Sewage Plant Air Extraction
Sewage Pumping Stations
ANY air emissions vented to atmosphere

Direct Dosing:

RXSOL Odor Eliminator is exceptionally effective in capturing its target in a liquid solution. Liquid solutions only produce odours when they reach a point where cavitation occurs, say at the end of the pipe or weir. Odour is produced as a result of the reduction in water pressure and the odorous gases are stripped out of solution.

This method of application is ideal for waste treatment plants, animal and fish processing plants, and pig and chicken farms, which have wash down systems where waste water is collected and stored in a settlement pond system or holding tanks.

RXSOL Odor Eliminator molecules will attach to the odorous compounds to remove toxins from the water and, over about seven days, will spread through the whole anaerobic/facultative/aerobic pond system to remove odours. This action chemically bonds (valency bond) to the odorous compound to form a non-toxic, non-odorous organic salt. Bacteria will then break down this salt. As a result, there is no increase in BOD, and no regeneration of foul odours.

RXSOL Odor Eliminator can best be thought of as a detoxifying catalyst that beneficially affects the pond ecology. It is extremely powerful.

RXSOL Odor Eliminator , which is not required to destroy toxic odorous compounds, will continue in the stream and neutralise any air that is stripped from the stream due to water turbulence at the treatment station or ponds.

Images:

Get MSDS

Get Technical Bulletin

Connect On Whats App

CHLOR RXSOL

Product Short Description: 12-15 percent free Chlorine Solution for Sterilization of waterClear greenish-yellow liquid miscible in any proportion with water.

Product Technical Specification:

12.5% wt. SODIUM HYPOCHLORITE - EXTRA - PURE

Parameters	Specification Range	Typical
Chlorine Mix	12.5 - 13.2	13.0
Available Chlorine (%wt)	11.9 - 12.6	12.4
Available Chlorine (%vol)	14.3 - 15.3	15.0
Available Chlorine grams/liter	143 - 153	150
Excess Caustic (%wt)	0.25 - 0.80	0.30
Specific Gravity @ 60°F	1.197 - 1.220	1.210
pH	12.0 - 13.0	12.50
Iron (Fe) ppm	<0.5	0.05
Nickel (Ni) ppm	<0.2	0.02
Copper (Cu) ppm	<0.2	0.05
Mercury (Hg) ppb	0.001 - 0.003	0.002
Sodium Chloride (NaCl)%	<15.0	12.5

Appearance: Clear greenish-yellow liquid miscible in any proportion with water.
This product meets the requirements of NSF standard 60 for drinking water.

Remarks:

Never use materials without proper knowledge and guideline, Refer MSDS and Technical bulletine before uses of this product.

Images:

Get MSDS

Get Technical Bulletin

Connect On Whats App

Descalant Powder with Colour Indicator

Product Short Description: Powdered Inhibited Acid Descaler Cleaner with colour indicator Inhibitor can be used for removing scales obtained from water in heating and cooling systems e.g. boilers, condensers, heat exchangers, jackets and coils

Product Technical Specification:

APPLICATION : Boilers, calorifiers, heat exchanges, diesel engine cooling system, condensers, evaporators & other type of equipment where rust & scale form.

Appearance

Reddish / Yellowish / white – Powder ( without indicator )

Density

1.2g/cm3

pH	(10 wt %):1.1

Compatibility

Metal

Suitable aluminium, zinc, tin and their alloys. Stainless steel, Carbon Steel, Cast Iron, Titanium, Copper , Copper alloys, PVC, Plastic , Rubber

Rubber

No known effect

Rubber

No known effect

Remarks:

Efficiency :Rapid Softening, disintegration and dissolving of scales.

Economy

By reducing down-time, productivity is increased. by protecting metal and by uniform leaning of the surface equipment life is prolonged and performance made superior. The above information is adequate for commonly encountered problems of descaling.

Handling & Storage

Safety

•    No Fumes Avoid contact with skin or eyes. Wear Cup-type, rubber or soft plastic-framed goggles, protective clothing, and rubber gloves must be worn when handling.

•    Keep in a tightly closed container. Protect from physical damage.

•    Store in a cool, dry, ventilated area away from sources of heat, moisture and incompatibilities.

•    Containers containing this material may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.

•    Ensure as low exposure as possible. Local exhaust ventilation is generally preferred as it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.

Images:

BRINE CORROSION INHIBITOR

Product Short Description: Fatty amine derivative with biocide and oxygen scavenger

Product Technical Specification:

Physical Properties :

- Odour: Odourless
- Appearance: colourless to yellow, miscible with water
- pH 11,5 - 14
- Boiling point 100 °C at 760 mm /Hg
- Density 1,155 - 1,190 g/cm3 at 20 deg C

Remarks:

Miscibility Dose 10% v/v can be use in NaCl and CaCl2 Brine reicrulating solution

1% by Volume in Brine Having Specific Gravity of 1.15

Efficiency : 90% minimum corrosion protection

Images:

Heat Transfer Salt HT 400

Product Short Description: Salt inhibited with the corrosion inhibitor resulting corrosion protection, as well as suitable for High Temperature heat transfer.

Product Technical Specification:

Main Ingredients	:	Salt Mixture with Corrosion Inhibitor
Inhibitors and water 6 Inhibitors	:	6 %
Colour Bright	:	Yellow
Nitrite Content	:	7.5 to 8.5%
Chloride Content	:	0.10% Max.
pH of solution	:	9.5 - 10.5
Odour	:	PRACTICALLY ODOURLESS
Solubility in water	:	SOLUBLE
Working Temp Range	:	> 400 Deg.C
Density @ 20 Deg.C	:	1160 Kg/m3
Reverse Alkalinity	:	Minimm 15.0 ml
Vapour pressure	:	.07 mbar at 20oC
Hear Transfer Salt TR	:	155
Skin absorption/irritation	:	YES
TLV Country	:
Pollution category 1994	:	III

Remarks:

Why use Heat Transfer molten salts?

Heat Transfer Salt extend the upper range of the temperature limits in which a liquid heat transfer media can be used.

Images:

Anionic Polyacrylamide Flocculant

Product Short Description: Polyacrylamide Flocculant to be used as flocculant in direct filtration process for settling of inorganic suspended solids, effluent water.

Product Technical Specification:

Properties :

Form	:Powder
Colour	:Off-white
Odour	:Odourless
Flash point	:Not applicable
Flammability	:Not flammable
Bulk density	:Approx. 750 kg/m3
Self ignition	:Not self-igniting
Explosion hazard	:Not explosive
Fire promoting properties	:Not fire-propagating
Solubility in water	:Forms a viscous solution.

Remarks:

Images:

Water Heater Geyser Cleaner

Product Short Description: Leave for just 10 minutes chemically developed RXSOL particle will dissolves hard and old lime scale deposits from surface of appliances.

Product Technical Specification:

A high strength commercial descaling fluid to attack stubborn lime scale caking inside dishwashing machines and other stainless steel equipment within the commercial catering environment. Descaler must be diluted before use using a 30ml 5lt pelican pump.

Dishwashers/Glass washers
• Switch off the electronic wall mounted dosing equipment (if applicable).
• Dilute Descaler with up to 20 parts water depending on the degree of scale build up and add directly into the wash tank. For best results, heat water up to working temperature and circulate until all scale is removed.
• Drain solution, refill and rinse thoroughly with clean water. Drain again and refill with clean water.

Tea Urns
• Fill urn with water and add 10 plunges of Descaler via 30 ml dispensing pump fitted to 5lt container.
• Allow approximately 1 hour contact time. If necessary, agitate scale with green scouring pad to remove stubborn heavy scale deposits.
• Drain and rinse thoroughly with clean water.

Floors & Hard Surfaces
• If you live in a hard water area and your water supply is untreated, routine floor & hard surface cleaning may leave scale deposits that will periodically need to be removed.
• Dilute Descaler with up to 20 parts water and wash the floor or surface as you would under normal circumstances. Always rinse the floor or surface after descaling and clean again using the appropriate cleaning product.

N.B. The use of hot water will accelerate the effectiveness of Descaler.

Remarks:

How to clean Coffee Machine / Kettle water heater
Half fill boiler of Coffee Machine with water and boil. Unplug electrical connection and slowly add the one spoon powder contents of RXSOL-25-1052-005. Leave for just 10 minutes chemically developed RXSOL particle will dissolves hard and old lime scale deposits from surface of appliances. It extends the life of the appliance and saves running cost.

Images:

Aqua Clean Tuff High Foam

Product Short Description: Very effective alkaline ship hold cleaner also can be use as multi purpose ship hold cleaning and general digressing agent. Stock available at - Kandla, Mumbai, Ennore - Chennai, Visakhapatnam - Gangavaram, Kolkata, Haldia, Fujairah

Product Technical Specification:

Tips for Hold cleaning - Prior to high pressure hold washing, excess cargo residue on the tank top should be removed by hand sweeping and lifted out of the holds via the use of a portable mucking winch. After all excessive cargo residue has been removed then the holds can be washed with salt water using a highpressure hold cleaning gun, supplemented by the deck air line to provide increased pressure. This is the most commonly used method of hold cleaning. Then use Aqua Clean Tuff hold cleaning Marine Chemicals. Cleaning Chemicals; Cargo Hold Cleaning detergent to get optimum result.

Remarks:

Hold Cleaning Preparation and Method :

Preparing Cargo Holds for loading Grain depends on the previous cargo.

1. Cargo Holds must be thoroughly cleaned and dry and trace of previous cargo in frames,

beams, girders, and other structure.

2. There should not be any loose rust and or paint scale anywhere in the Cargo Holds,

Bulkheads, upper and lower hopper spaces, underneath of Hatch Covers and tank top.

3. There should not be traces of live & dead insect & weevils.

4. Bilge covers should be cleaned of any cargo residues and have enough drain holes. Bilge

cover needs to be grain tight but not watertight.

5. Bilge well should be cleaned of previous cargo dray and odour free.

6. Bilge suction should be operational at all the times.

Removal of cargo residue:

Air Blow from top using high pressure air to reach all accessible corners. Cargo to be swept,

scrapped & collected in a drum. Attention to be given

• Australian ladder and its platforms and stanchions

• Beams and girders under cross decks

• Frames, beams, girders, and other structure

• Large pipes holding brackets behind the pipes

Then Cleaning and sweeping coal cargo from the hold as maximum possible by HELPER / Crew member

Loose Rust & Paint Scale:

A sharp hand scraper shall be used to take off the peeling rust & paint scale

Special attention to following areas:

• Australian ladder and its platforms, hand rails and stanchions

• Australian ladder and its platforms and stanchions

• Beams and girders under cross decks

• Frames, beams, girders, and other structure

• Large pipes holding brackets behind the pipes

• Hatch coamings and under hatch covers

• Booby hatches & cover

Tank top loose rust

Tank top should be free of loose rust and cargo residue

Any rust which can be scraped by hand scrapers should be removed.

The tank top should be rinsed with fresh water

Cleanliness of cargo hold bilges :

Hold bilges must be cleaned thoroughly to remove all residue, rust particles and cargo stains etc.

The filter (Rose Box) must be cleaned thoroughly

The bilge well sections shall be washed with continuous running of sea water to remove all odour and later rinsed with fresh water

Images:

Super Dilac Acidic Detergent

Product Short Description: Heavy Duty acidic detergent for Metal Tarnish Remover Specially designed for removal of rust from any steel surface area also acts as rust proofing agent. It is non-flammable. Prevents further rusting.

Product Technical Specification:

PRODUCT PROPERTIES :

APPEARANCE	Clear Yellowish liquid
DENSITY	g/cm3 at 15°C: 1.2
pH	10% solution 1.5-2.5	Buffer Action of materials makes it different from other BRAND.
COMPATIBILITY
METAL	Suitable for M.S and S.S metal
RUBBER	No known effect
PACKAGING	Order No. RXSOL-20-1011-210	Size (in litres) 25 , 35 , 210

Remarks:

Specially designed for removal of rust from any steel surface area and rust stain from Brass, Copper, S.S, wood, ceramic and aluminium surfaces, painted or not. And act as surface brightner. Also acts as the rustproofing agent before the application of paint or coatings. It is non-flammable. Prevents further rusting.

Metals Britte is one of popular maintenance and cleaning chemicals in marine, shipping lines and oil field industries. You shouldn't use Acid like, vinegar, or HCl on rust to clean it because, although it initially dissolves the rust, it leaves the steel very active and prone to immediate re-rusting ("flash rusting"). What you want is Rust remover like Metals Clean Brittee and Rust Converter, which is phosphoric acid based detergent which has the capability of converting the dusty, flaky red rust to stable "black rust". In general Alkalis like lye also peoples are using which is good at dissolving oil and grease, but don't convert rust so metal starts immediate re-rusting.

Dont expose your precious metal parts to any chemicals, Many chemicals supplier only engaged to provide cheaper solution doesn't know chemistry of rust. Rust Dissolving is chemicals process, Metals Britte is combination of Corrosion Inhibitor, Phosphoric acid, Proprietory blend of detergent and most important things Buffer mixture which is stands to protect metal against acid attack.

We are not only sailing product in large scale, but also building strong relation with our users. Our daily study and knowledge in chemistry given us opportunity to develop and research many new products. We are bounded to provide best product to our customer.

We have done lots of experiment to get "pH and rust" experiment graph, As we knows the pH indicates whether there is an excess of H+ or OH- in the solution. And step wise we can undersatnd as follows :
1) pH 7.0 indicating balance of H+ or OH- .
2) pH less than 7.0 there is an excess of H+, the lower the pH, the more H+.
3) pH over 7.0 there is an excess of OH-, the higher the pH, the higher the OH- concentration.

Usually, low pH solutions, with their excess of H+, will react with iron and dissolve it, whereas high pH solutions, with their excess of OH, do not react with iron. This is general chemistry behind rust cleaning chemicals.

Images:

PRELOAD Slip HOLD BLOCK

Product Short Description: Polymer BASED non reactive coating materials which makes thin film barrier on surface after dry. Due to formation of RXSOL THIN barrier film on surface, the cleaning operation after unloading becomes quicker and easier with optimum results.

Product Technical Specification:

Product metal against corrosive cargo
Products paint against cargo penetration
Environmentally friendly
Safe to use in occupied / covered areas
Reduces turn around times
Easy to direct spray
If hold cleaning is to be performed from tank top level only powerful equipment designed for cargo hold cleaning will do the job in a minimum of time.
Effective cleaning chemicals that can dissolve stains and remove discoloring are required the crew needs to have effective equipment to apply these chemicals from tank top level personal proactive equipment is required depending on type and condition of hold paint chemical that protect the paint may also be needed
And don’t forget procedures have to be drown up and your
Crew trained for the job Standardization of equipment and chemical onboard you ship will make life easier for your seaman and save your time

Remarks:

Refer this link for complete set of HOLD CLEANING KIT ::: http://rxmarine.com/Ship-hold-cleaning-kit-set-supplier

Images:

Search form

Copper Carbonate

Odor Control

CHLOR RXSOL

Descalant Powder with Colour Indicator

Appearance

Efficiency :Rapid Softening, disintegration and dissolving of scales.

Economy

Safety

BRINE CORROSION INHIBITOR

Heat Transfer Salt HT 400

Mancozeb 75 Fungicide

Anionic Polyacrylamide Flocculant

Water Heater Geyser Cleaner

Aqua Clean Tuff High Foam

Removal of cargo residue:

Loose Rust & Paint Scale:

Cleanliness of cargo hold bilges :

Super Dilac Acidic Detergent

PRELOAD Slip HOLD BLOCK

HAVE A QUESTION?

Ask a question - WebForm Inline

LiveChat